A. Mimaroglu

发表

Influence of porosity characteristics in MgO.ZrO2-GG coating subjected to thermal loading

U. Kocabicak, S. Genc, U. Kocabicak, 1997 .

Prediction and optimization of tribological behavior of nylon composites using Taguchi analysis method

F. Ficici, A. Kirdar, H. Unal, 2016 .

Tribological Performance of PTFE Bronze Filled Composites under Wide Range of Application Conditions

H. Unal, M. Aydin, A. Mimaroglu, 2010 .

Use of the finite element technique to analyze the influence of coating materials, material phase state and the purity on the level of the developed thermal stresses in plasma coating systems under thermal loading conditions

I. Taymaz, A. Ozel, A. Mimaroglu, 2001 .

Comparison of the thermal stresses developed in diamond and advanced ceramic coating systems under thermal loading

A. Ozel, A. Mimaroglu, I. Calli, 2000 .

Thermal, mechanical and tribological performance of polymer composites rubbed against polymer composites in application in electrical contact breakers

H. Unal, A. Mimaroglu, T. Saylan, 2014 .

Comparison of tribological performance of some neat polymer and polymers composites

H. Unal, A. Mimaroglu, 2013 .

Influence of SiO2 and MnO2 additives on the dry friction and wear performance of Al2O3 ceramic

A. Ozel, A. Mimaroglu, I. Calli, 2001 .

Mechanical and Morphological Properties of Mica and Short Glass Fiber Reinforced Polyamide 6 Composites

H. Unal, A. Mimaroglu, 2012 .

Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions

H. Unal, A. Mimaroglu, U. Kadıoglu, 2004 .

The influence of thermal history, strain rate and sample geometry on the deformation behaviour of polymers: use of the thermovision technique

O. F. Yenihayat, A. Çelebi, A. Mimaroglu, 1995 .

Comparison of the developed thermal stresses in Al2O3–SG, ZrO2–12%Si+Al and ZrO2–SG coating systems subjected to thermal loading

U. Kocabicak, O. Mete, A. Mimaroglu, 1999 .

Investigation of the water lubricated tribological behavior of medical grade UHMWPE

H. Unal, A. Mimaroglu, 2015 .

Dry sliding wear characteristics of some industrial polymers against steel counterface

Huseyin Unal, U. Şen, H. Unal, 2004 .

Abrasive wear behaviour of polymeric materials

Huseyin Unal, U. Şen, H. Unal, 2005 .

Experimental investigation of heat losses in a ceramic coated diesel engine

I. Taymaz, I. Taymaz, K. Cakir, 2003 .

Tribological Performance of Medical Grade UHMWPE Polymer at Egg Albumen Lubricated Condition

H. Unal, A. Mimaroglu, 2015 .

Influence of the addition of Cr2O3 and SiO2 on the tribological performance of alumina ceramics

I. Taymaz, A. Ozel, A. Mimaroglu, 2003 .

Ballistic penetration into targets: use of F.E. technique

H. Unal, A. Mimaroglu, H. Unal, 2006 .

Experimental study of effective efficiency in a ceramic coated diesel engine

I. Taymaz, I. Taymaz, K. Cakir, 2005 .

Study of Abrasive Wear Volume Map for PTFE and PTFE Composites

U. Şen, H. Unal, A. Mimaroglu, 2007 .

Comparison of thermal stresses developed in Al2O3-SG, ZrO2-(12% Si + Al) and ZrO2-SG thermal barrier coating systems with NiAl, NiCrAlY and NiCoCrAlY interlayer materials subjected to thermal loading

V. Ucar, I. Taymaz, I. Taymaz, 1999 .

A numerical study of geometric and material instability in uniaxial drawn polymers

V. Sevinç, A. Ozel, A. Mimaroglu, 1996 .

Influence of micro- and nanofiller contents on friction and wear behavior of epoxy composites

H. Unal, A. Mimaroglu, I. Ozsoy, 2017 .