A. Suzuki

发表

Development of Tensile Test Method for High-density Coal under Carbonization

H. Aoki, T. Miura, Koichi Fukuda, 1998 .

The Kinetics of the Transition of Titanium Dioxide

Y. Kotera, A. Suzuki, 1962 .

Kinetics of the transition of titanium dioxide prepared by sulfate process and chloride process.

A. Suzuki, R. Tukuda, 1969, Bulletin of the Chemical Society of Japan.

Mechanical Properties of Vacuum Carbon-Deoxidized Thick-Wall 2¼Cr-1Mo Steel Forging

A. Suzuki, S. Kinoshita, M. Kohno, 1982 .

Creep Rupture Properties of 12%Cr Steel Rotor for an Ultra Super Critical Steam Turbine

H. Yokota, A. Hizume, A. Suzuki, 1990 .

The Production of Large Electroslag Ingots with Low Oxygen and Aluminum Concentration from Steel Containing 12% Cr

M. Okamura, A. Suzuki, 1991 .

On Secondary Dendrite Arm Spacing in Commercial Carbon Steels with Different Carbon Content

Yutaka Nagaoka, A. Suzuki, Takeshi Suzuki, 1968 .

Cast Structure of Continuously Cast Steel Ingot

A. Suzuki, 1974 .

Dendrite Morphology and Arm Spacing of Steels

Yutaka Nagaoka, A. Suzuki, 1969 .

Cast Structure of Aluminum Ingot Solidified under High Pressure

A. Suzuki, J. Nakamura, 1969 .

On the Origin of Coarse Equiaxed Grains in Al-0.2%Cu Alloy Ingots Solidified under a High Pressure

A. Suzuki, T. Sakamoto, J. Nakamura, 1969 .

Charge-carrier Drift Mobility in Pyrene Single Crystals

Y. Maruyama, H. Inokuchi, A. Suzuki, 1976 .

An Advanced 12Cr Steel Rotor Applicable to Elevated Steam Temperature 593°C

H. Yokota, A. Hizume, A. Suzuki, 1987 .

Effect of Alloying Elements on Primary Dendrite Arm Spacing in Iron-base Alloys

A. Suzuki, I. Bessho, Yutaka Nacaoka, 1977 .

Nucleation of θ′ precipitates in an Al4% Cu alloy

H. Kimura, A. Suzuki, 1970 .

Cast Structure of Ingot

A. Suzuki, 1970 .