Jicheng Chen

发表

Microstructure and magnesium burning loss behavior of AA6061 electron beam welding joints

X. Zhan, Junjie Liu, Yanhong Wei, 2016 .

Study on the Adhesive Joint Strength of 2060-T8 Al–Li Alloy Single Lap Joint with Different Adhesives

X. Zhan, Hongliang Wu, Yanhong Wei, 2018 .

Experimental and numerical analysis on the strength of 2060 Al–Li alloy adhesively bonded T joints

X. Zhan, Hongliang Wu, Yanhong Wei, 2016 .

Effect of Laser-Arc Heat Input Ratio on the Formation, Microstructure, and Properties of EH36 Steel with Laser-Metal Inert Gas Hybrid Welding

Yanhong Wei, Jicheng Chen, Hong Jin, 2022, Journal of Materials Engineering and Performance.

A 3D arc-droplet-molten pool integrated model of Al alloy GMAW process: Heat transfer, fluid flow and the effect of external magnetic field

Yanhong Wei, Xinwei Du, Jicheng Chen, 2022, Vacuum.

Microstructure and wear resistance of Fe-based hardfacing layer prepared by flux-cored wire feeding MAG welding process

Yanhong Wei, Renpei Liu, Jicheng Chen, 2021, Welding in the World.

Weld profile, microstructure, and mechanical property of laser-welded butt joints of 5A06 Al alloy with static magnetic field support

X. Zhan, Yanhong Wei, P. Pan, 2017 .

Macro-micro modeling and simulation on columnar grains growth in the laser welding pool of aluminum alloy

Yanhong Wei, Jicheng Chen, Wen Wang, 2018, International Journal of Heat and Mass Transfer.

The porosity formation mechanism in the laser-MIG hybrid welded joint of Invar alloy

X. Zhan, Yanhong Wei, C. Gu, 2017 .

Macro–micro residual stress prediction and hot crack formation mechanism during laser melt injection processing of ZrO2 particles into Ti6Al4V substrate

Yanhong Wei, Q. Cheng, Jicheng Chen, 2022, The International Journal of Advanced Manufacturing Technology.

Asymmetry of keyhole and weld pool geometry in PLBW of tailor-welded steel sheets with edge misalignment: Numerical modeling and experimental validation

Longgen Qian, Yanhong Wei, Feng-Zhang Tang, 2023, Optics & Laser Technology.

Weld pool dynamics and joining mechanism in pulse wave laser beam welding of Ti-6Al-4V titanium alloy sheets assembled in butt joint with an air gap

Yanhong Wei, Jicheng Chen, X. Du, 2022, Optics & Laser Technology.

Numerical investigation on keyhole collapsing and rebuilding behavior during pulsed laser beam welding of Ti6Al4V titanium alloy under various pulse frequencies

Yanhong Wei, Xiaomei Chen, Jicheng Chen, 2022, Applied Physics A.

Effects of groove clearance size on gap bridging capacity in PWLBW of Ti6Al4V alloy sheet assembled in butt joint configuration: Numerical simulation and experimental assessment

Yanhong Wei, Xinwei Du, Jicheng Chen, 2022, Optics & Laser Technology.

Failure analysis of cracking in the thin-walled pressure vessel of electric water heater

M. Wang, Kai Guo, Yanhong Wei, 2022, Engineering Failure Analysis.

Parameter optimization of multi-pass multi-layer MIG welded joint for invar alloy

X. Zhan, Yanhong Wei, Jicheng Chen, 2016, The International Journal of Advanced Manufacturing Technology.

Parameter optimization of multi-pass multi-layer MIG welded joint for invar alloy

X. Zhan, Yanhong Wei, Jicheng Chen, 2016 .

Thermoelectric currents and thermoelectric-magnetic effects in full-penetration laser beam welding of aluminum alloy with magnetic field support

X. Zhan, Yanhong Wei, C. Gu, 2018, International Journal of Heat and Mass Transfer.

Melt flow and thermal transfer during magnetically supported laser beam welding of thick aluminum alloy plates

X. Zhan, Yanhong Wei, Tao Zhang, 2018 .

Effect of external applied steady magnetic field on the morphology of laser welding joint of 4-mm 2024 aluminum alloy

X. Zhan, Yanhong Wei, Weihua Sun, 2017 .

Influence of magnetic field orientation on molten pool dynamics during magnet-assisted laser butt welding of thick aluminum alloy plates

X. Zhan, Yanhong Wei, Qiyu Gao, 2018, Optics & Laser Technology.

Effect of welding heat input conditions on the dynamic behavior of pulse laser beam welding molten pool for Ti6Al4V thin plate with clearance

Yanhong Wei, Feng-Zhang Tang, Jicheng Chen, 2022, The International Journal of Advanced Manufacturing Technology.

Comparative investigation of wire arc additive manufacturing of Al-5%Mg alloy with and without external alternating magnetic field

Yanhong Wei, Xujing Zhang, Jicheng Chen, 2022, The International Journal of Advanced Manufacturing Technology.

Numerical simulation research on welded residual stress and distortion of aero-engine afterburner lobe mixer with different welding sequences

Yanhong Wei, Xiangbo Liu, Jicheng Chen, 2023, The International Journal of Advanced Manufacturing Technology.

Effect of external applied steady magnetic field on the morphology of laser welding joint of 4-mm 2024 aluminum alloy

X. Zhan, Yanhong Wei, Weihua Sun, 2017, Applied Physics A.

Numerical investigation on keyhole stability and weld pool dynamics during quasi-continuous laser beam welding of Ti6Al4V plate using constant and modulated high-frequency pulsed heat input

Yanhong Wei, Xiaomei Chen, Jicheng Chen, 2022, The International Journal of Advanced Manufacturing Technology.

Effect of Laser-Arc Heat Input Ratio on the Formation, Microstructure, and Properties of EH36 Steel with Laser-Metal Inert Gas Hybrid Welding

Yanhong Wei, Jicheng Chen, Hong Jin, 2022, Journal of Materials Engineering and Performance.

Modeling and simulation of heat transfer, fluid flow and geometry morphology in GMAW-based wire arc additive manufacturing

Yanhong Wei, Renpei Liu, Jicheng Chen, 2021, Welding in the World.

Morphology, mechanical property, and molten pool dynamics in spot modulated-PLBW of Ti6Al4V alloy sheets with air gap condition

Jicheng Chen, Bin-Bin Kong, Yanhong Wei, 2023, Science and Technology of Welding and Joining.

Comparative investigation of wire arc additive manufacturing of Al-5%Mg alloy with and without external alternating magnetic field

Yanhong Wei, Xujing Zhang, Jicheng Chen, 2022, The International Journal of Advanced Manufacturing Technology.