Kazuhiro Shintani

发表

1501 Development of Small High Accuracy Lathe with Ceramic Body

Kazuhiro Shintani, Hideharu Kato, Yuichi Murakami, 2006 .

A Study on High-Speed Milling Using Small End Mill : Development of Small Machine Tool and Cutting Performance

Kazuhiro Shintani, Hideharu Kato, Manabu Sawada, 2004 .

Optimum tool geometry of CBN tool for continuous turning of carburized steel

Kazuhiro Shintani, Yoshio Fujimura, Masanori Ueki, 1989 .

Influence of Running surface of rails and wheels upon Track Circuit Shunting Resistance : 2nd Report, Influence Macroscopic Roughness Changing of the Rail Running Surface upon Track Circuit Shunting Resistance

Kazuhiko Nagase, Kazuhiro Shintani, Junji Hirama, 2003 .

Optimum cutting tool geometry when interrupted cutting carburized steel by CBN tool

Kazuhiro Shintani, Yoshio Fujimura, Masanori Ueki, 1989 .

High Speed Machining: A Review from a Viewpoint of Chip Formation

Masahiro Anzai, Toshiyuki Obikawa, Etsuo Takeoka, 2010 .

The Temperature Distribution at Worn Surface of Tool Flank

Kazuhiro Shintani, Yoshio Fujimura, Hiroshi Kawabata, 1976 .

Microstructure and mechanical properties of sintered cubic boron nitride

Kazuhiro Shintani, Yoshio Fujimura, M. Ueki, 1987 .

Cutting performance of a binder-less sintered cubic boron nitride tool in the high-speed milling of gray cast iron

Kazuhiro Shintani, Hideharu Kato, Hitoshi Sumiya, 2002 .

Wear Mechanism of PcBN Tool in High Speed Machining of Gray Cast Iron.

Naohiko Suzuki, Kazuhiro Shintani, Hideharu Kato, 1998 .

Machining of nickel-based superalloy using PcBN endmill tool : Effect of high-pressure coolant supply on tool wear

Kazuhiro Shintani, Hideharu Kato, Yuichiro Kohno, 1996 .

High Speed Machining of Bio-Titanium Alloy with a Binder-Less PcBN Tool

Kazuhiro Shintani, Hideharu Kato, Kenichi Hirosaki, 2004 .