Seunghun Baek

发表

Analytical modeling of a medium-voltage and high-frequency resonant coaxial-type power transformer for a solid state transformer application

Subhashish Bhattacharya, Seunghun Baek, S. Bhattacharya, 2011, 2011 IEEE Energy Conversion Congress and Exposition.

High-Frequency AC-link Transformers for Medium-Voltage DC/DC Converters and Solid State Transformer Applications

Seunghun Baek, 2013 .

Improved wind farm’s power availability by battery energy storage systems: modeling and control

M. Baran, S. Bhattacharya, Seunghun Baek, 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation

Tae-Uk Jung, Seunghun Baek, Jae-Suk Lee, 2018, 2018 IEEE 15th International Workshop on Advanced Motion Control (AMC).

Reduced-Order Models for Blisks With Small and Large Mistuning and Friction Dampers

Seunghun Baek, Bogdan I. Epureanu, Weihan Tang, 2016 .

Design and development of Generation-I silicon based Solid State Transformer

Alex Q. Huang, Subhashish Bhattacharya, Yu Du, 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

Isolation Transformer for 3-Port 3-Phase Dual-Active Bridge Converters in Medium Voltage Level

Subhashish Bhattacharya, Seunghun Baek, S. Bhattacharya, 2019, IEEE Access.

High-voltage high-frequency transformer design for a 7.2kV to 120V/240V 20kVA solid state transformer

Alex Q. Huang, Subhashish Bhattacharya, Yu Du, 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

Contact model identification for friction ring dampers in blisks with reduced order modeling

Seunghun Baek, Bogdan I. Epureanu, 2020 .

Analytical Modeling and Implementation of a Coaxially Wound Transformer With Integrated Filter Inductance for Isolated Soft-Switching DC–DC Converters

Seunghun Baek, Subhashishi Bhattacharya, S. Bhattacharya, 2018, IEEE Transactions on Industrial Electronics.

Transformer less Intelligent Power Substation design with 15kV SiC IGBT for grid interconnection

Subhashish Bhattacharya, Seunghun Baek, Kamalesh Hatua, 2011, 2011 IEEE Energy Conversion Congress and Exposition.

Reduced Order Modeling Techniques in Experimental Dynamic Substructuring

Matthew Robert Brake, Daniel R. Roettgen, Seunghun Baek, 2015 .

Design considerations of high voltage and high frequency three phase transformer for Solid State Transformer application

Subhashish Bhattacharya, Seunghun Baek, Sumit Dutta, 2010, 2010 IEEE Energy Conversion Congress and Exposition.

Design considerations for low stray impedance printed-circuit-boards for switching converters

Seunghun Baek, Jaesuk Lee, 2019, 2019 International Symposium on Electrical and Electronics Engineering (ISEE).

A Comparison of Reduced Order Modeling Techniques Used in Dynamic Substructuring

Matthew Robert Brake, Matthew S. Allen, Daniel R. Roettgen, 2016 .

Power flow analysis for 3-port 3-phase dual active bridge dc/dc converter and design validation using high frequency planar transformer

Sungmin Kim, Subhashish Bhattacharya, Seunghun Baek, 2013, 2013 IEEE Energy Conversion Congress and Exposition.

Design and hardware implementation of Gen-1 silicon based solid state transformer

Alex Q. Huang, Subhashish Bhattacharya, Tiefu Zhao, 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

Characterization of a three-phase dual active bridge DC/DC converter in wye-delta connection for a high frequency and high power applications

Subhashish Bhattacharya, Seunghun Baek, Sumit Dutta, 2011, 2011 IEEE Energy Conversion Congress and Exposition.

High-frequency design considerations of dual active bridge 1200 V SiC MOSFET DC-DC converter

Subhashish Bhattacharya, Seunghun Baek, Arun Kadavelugu, 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).