J. García-Infanta

发表

Interface Effects on the Fracture Mechanism of a High-Toughness Aluminum-Composite Laminate

C. Cepeda-Jiménez, M. Pozuelo, O. Ruano, 2008 .

An evidence of high strain rate superplasticity at intermediate homologous temperatures in an Al-Zn-Mg-Cu alloy processed by high-pressure torsion

O. Ruano, F. Carreño, A. P. Zhilyaev, 2009 .

Influence of the supersaturated silicon solid solution concentration on the effectiveness of severe plastic deformation processing in Al–7 wt.% Si casting alloy

C. Cepeda-Jiménez, O. Ruano, A. Zhilyaev, 2011 .

Microstructural development during equal channel angular pressing of hypo-eutectic Al–Si casting alloy by different processing routes

T. Mcnelley, O. Ruano, F. Carreño, 2008 .

Achieving microstructures prone to superplastic deformation in an Al–Zn–Mg–Cu alloy by equal channel angular pressing

C. Cepeda-Jiménez, O. Ruano, F. Carreño, 2013 .

High strain rate superplasticity at intermediate temperatures of the Al 7075 alloy severely processed by equal channel angular pressing

C. Cepeda-Jiménez, O. Ruano, F. Carreño, 2011 .

Effect of the deformation path on the ductility of a hypoeutectic Al–Si casting alloy subjected to equal-channel angular pressing by routes A, BA, BC and C

C. Cepeda-Jiménez, O. Ruano, F. Carreño, 2008 .

Influence of Processing Severity During Equal-Channel Angular Pressing on the Microstructure of an Al-Zn-Mg-Cu Alloy

J. Blandin, C. Cepeda-Jiménez, E. Rauch, 2012, Metallurgical and Materials Transactions A.

Grain shape and microstructural evolution during equal channel angular pressing

T. Mcnelley, O. Ruano, F. Carreño, 2008 .

Assessment of homogeneity of the shear-strain pattern in Al–7 wt%Si casting alloy processed by high-pressure torsion

C. Cepeda-Jiménez, O. Ruano, A. Zhilyaev, 2014 .

Particle and grain growth in an Al-Si alloy during high-pressure torsion

T. Langdon, O. Ruano, A. Zhilyaev, 2007 .

Influence of the alumina thickness at the interfaces on the fracture mechanisms of aluminium multilayer composites

C. Cepeda-Jiménez, M. Pozuelo, O. Ruano, 2008 .

Mechanical properties at room temperature of an Al–Zn–Mg–Cu alloy processed by equal channel angular pressing

C. Cepeda-Jiménez, O. Ruano, F. Carreño, 2011 .

Influence of the thermal treatment on the deformation-induced precipitation of a hypoeutectic Al–7 wt% Si casting alloy deformed by high-pressure torsion

C. Cepeda-Jiménez, O. Ruano, A. Zhilyaev, 2011 .

Enhanced grain refinement due to deformation-induced precipitation during ambient-temperature severe plastic deformation of an Al–7%Si alloy

C. Cepeda-Jiménez, T. Mcnelley, O. Ruano, 2009 .

Strain path and microstructure evolution during severe deformation processing of an as-cast hypoeutectic Al–Si alloy

T. Mcnelley, O. Ruano, F. Carreño, 2010 .

Impact toughness improvement of high-strength aluminium alloy by intrinsic and extrinsic fracture mechanisms via hot roll bonding

C. Cepeda-Jiménez, M. Pozuelo, O. Ruano, 2009 .

Severe plastic deformation of an as-cast hypoeutectic Al–Si alloy

T. Mcnelley, O. Ruano, F. Carreño, 2008, Journal of Materials Science.

Effects of Radial Hydrides on PWR Cladding Ductility following Drying and Storage

M. Billone, T. Burtseva, J. García-Infanta, 2017 .