Mostafa Keshavarz Moraveji

发表

Generalized models for predicting the critical properties of pure chemical compounds

Amir Varamesh, Abdolhossein Hemmati-Sarapardeh, Mostafa Keshavarz Moraveji, 2017 .

3D fracture modeling in Parsi oil field using artificial intelligence tools

Amir Kavousi, Hamed Darabi, Mostafa Keshavarz Moraveji, 2010 .

Hydrodynamic Analysis of a Concentric Draft Tube Airlift Reactor Using Computational Fluid Dynamics

Mostafa Keshavarz Moraveji, 2012 .

Experimental and field test analysis of different loss control materials for combating lost circulation in bentonite mud

Mostafa Keshavarz Moraveji, Majid Valizadeh, Alireza Nasiri, 2017 .

Determination the Factors Affecting the Vane-Plate Demisters Efficiency Using CFD Modeling

Mostafa Keshavarz Moraveji, Jaber Gharib, M. Moraveji, 2011 .

Investigation of Some Effective Parameters on the Fluidized Bed Grain Dryers

Mostafa Keshavarz Moraveji, 2013 .

CFD simulation of gas-liquid flow behaviour in an air-lift reactor: determination of the optimum distance of the draft tube

Mostafa Keshavarz Moraveji, Atefeh Hekmat, Abtin Ebadi Amooghin, 2010, Simul. Model. Pract. Theory.

Droplet microfluidics: fundamentals and its advanced applications

Mostafa Keshavarz Moraveji, Somayeh Sohrabi, Nour kassir, 2020, RSC advances.

Application of CFD for designing conventional three phase oilfield separator

Mostafa Keshavarz Moraveji, Ahmadreza Ghaffarkhah, Mohammadjavad Ameri Shahrabi, 2017 .

Comparative study of Euler and mixture models for turbulent flow of Al2O3 nanofluid inside a horizontal tube

Majid Hejazian, Mostafa Keshavarz Moraveji, Alireza Beheshti, 2014 .

CFD Examination of Convective Heat Transfer and Pressure Drop in a Horizontal Helically Coiled Tube with CuO/Oil Base Nanofluid

Majid Hejazian, Mostafa Keshavarz Moraveji, M. Moraveji, 2014 .

CFD modeling of a spouted bed with a porous draft tube

Goodarz Ahmadi, Mostafa Keshavarz Moraveji, Seyyed Hossein Hosseini, 2010 .

Comparative Numerical Investigation on TiO2/Water Nanofluid Turbulent Flow by Implementation of Single Phase and Two Phase Approaches

Majid Hejazian, Mostafa Keshavarz Moraveji, Alireza Beheshti, 2014 .

Comparison between single-phase and two-phases CFD modeling of laminar forced convection flow of nanofluids in a circular tube under constant heat flux ☆

Mostafa Keshavarz Moraveji, M. Moraveji, Elahe Esmaeili, 2012 .

Experimental investigation of aluminum oxide nanofluid on heat pipe thermal performance

Sina Razvarz, Mostafa Keshavarz Moraveji, M. Moraveji, 2012 .

CFD modeling (comparing single and two-phase approaches) on thermal performance of Al2o3/water nanofluid in mini-channel heat sink

Mostafa Keshavarz Moraveji, M. Moraveji, R. Ardehali, 2013 .

Experimental investigation on heat transfer characteristics and pressure drop of BPHE (brazed plate heat exchanger) using TiO2–water nanofluid

Mostafa Keshavarz Moraveji, M. Moraveji, Ramtin Barzegarian, 2016 .

Drilling rate of penetration prediction and optimization using response surface methodology and bat algorithm

Meysam Naderi, Mostafa Keshavarz Moraveji, M. Moraveji, 2016 .

3D Computational-Fluid-Dynamics Modeling of Horizontal Three-Phase Separators: An Approach for Estimating the Optimal Dimensions

Mostafa Keshavarz Moraveji, Ahmadreza Ghaffarkhah, Mohammadjavad Ameri Shahrabi, 2018 .

Investigation of drill pipe rotation effect on cutting transport with aerated mud using CFD approach

Mostafa Keshavarz Moraveji, Mohammad Sabah, Ahmad Shahryari, 2017 .

Experimental investigation and CFD simulation of turbulence effect on hydrodynamic and mass transfer in a packed bed airlift internal loop reactor

Mostafa Keshavarz Moraveji, Reza Davarnejad, Mahboubeh Jafarkhani, 2011 .

Modeling of convective heat transfer of a nanofluid in the developing region of tube flow with computational fluid dynamics

Mostafa Keshavarz Moraveji, Reza Davarnejad, Mehdi Darabi, 2011 .