Túlio Hallak Panzera

发表

Technical and Economic Analysis of Structures of Buildings in Reinforced Concrete with Ribbed Slab from 3 to 21 Floors

Felipe Nascimento Arroyo, André Luis Christoforo, Francisco Antonio Rocco Lahr, 2018 .

New Trends of Sustainable Materials for Civil Engineering

Túlio Hallak Panzera, 2016 .

Development of a three-component dynamometer to measure turning force

T. R. Mansur, Alexandre M. Abrão, Túlio Hallak Panzera, 2012 .

The Influence of Rice Husk Ash Addition on the Properties of Metakaolin-Based Geopolymers

Túlio Hallak Panzera, Paulo H. R. Borges, Vitor A. Nunes, 2016 .

Comparison among the Longitudinal Modulus of Elasticity in Eucalyptus grandis Timber Beams by Alternative Methodologies

Victor Almeida De Araujo, André Luis Christoforo, Francisco Antonio, 2015 .

Numerical evaluation of the modulus of longitudinal elasticity in structural round timber elements of the Eucalyptus genus

Francisco Antonio Rocco Lahr, André Luis Christoforo, Túlio Hallak Panzera, 2011 .

Machining Optimization of Sleeve and Valves of Hydraulic Steering System

Lincoln Cardoso Brandão, Túlio Hallak Panzera, Sandro Silva, 2010 .

Anisotropy Influence in Obtaining Stiffness Property in Bending of Brazilian Wood Species

André Luis Christoforo, Francisco Antonio, Rocco Lahr, 2014 .

New analytical approach for estimating density of Brazilian tropical woods based on fundamental concepts

André Luis Christoforo, Diego Henrique de Almeida, Francisco Antonio Rocco Lahr, 2019 .

Evaluation of modulus of elasticity in static bending of particleboards manufactured with Eucalyptus grandis wood and oat hulls

André Luis Christoforo, Francisco Antonio Rocco Lahr, Diego Henrique de Almeida, 2014 .

Emprego de ferramentas numéricas na avaliação do módulo de elasticidade em vigas roliças de madeira

Francisco Antonio Rocco Lahr, André Luis Christoforo, André Luiz Zangiácomo, 2012 .

Investigations on the Pozzolanic Effect of Sugar Cane Bagasse Ashes Used in Cementitious Composites

Maria Teresa Paulino Aguilar, Túlio Hallak Panzera, Roberto B. Figueiredo, 2016 .

The position effect of structural Eucalyptus round timber on the flexural modulus of elasticity

Francisco Antonio Rocco Lahr, André Luis Christoforo, Túlio Hallak Panzera, 2011 .

Avaliação do módulo de elasticidade longitudinal em peças estruturais de Pinus Caribaea

André Luis Christoforo, Túlio Hallak Panzera, Fábio de Paiva Cota, 2012 .

Technical Feasibility Study for the Use of Alternative Timber in Latticework for Roofing with Spans between 16 and 26 Meters

Felipe Nascimento Arroyo, André Luis Christoforo, Diego Henrique de Almeida, 2018 .

Painéis MDF produzidos com resina poliuretana à base de óleo de mamona

André Luis Christoforo, Francisco Antonio Rocco Lahr, Túlio Hallak Panzera, 2013 .

INFLUENCE OF STIFFNESS IN BOLTED CONNECTIONS IN WOODEN PLANE STRUCTURE OF TRUSS TYPE

André Luis Christoforo, Francisco Antonio Rocco Lahr, Túlio Hallak Panzera, 2011 .

Numerical Evaluation of the Mechanical Behavior of a Particulate Composite Material as Reinforcement in Timber Beams

André Luis Christoforo, Carlos Henrique Lauro, Rocco Lahr, 2013 .

Geometric effects of sustainable auxetic structures integrating the particle swarm optimization and finite element method

Fabrizio Scarpa, Sergio Luiz Moni Ribeiro Filho, Túlio Hallak Panzera, 2014 .

Preliminary investigations on auxetic structures based on recycled rubber

Carlos Henrique Lauro, Fabrizio Scarpa, Lincoln Cardoso Brandão, 2012 .

Shear and Longitudinal Modulus of Elasticity in Structural Lumber Beams

André Luis Christoforo, Rocco Lahr, Túlio Hallak Panzera, 2014 .

Full factorial design analysis of carbon nanotube polymer-cement composites

Christopher R. Bowen, André Luis Christoforo, Fabrizio Scarpa, 2012 .

Influence of Displacements on Calculus of the Longitudinal Modulus of Elasticity of Pinus Caribaea Structural Round Timber Beams

André Luis Christoforo, Francisco Antonio Rocco Lahr, Elen Aparecida Martines Morales, 2012 .

Shrinkage for Some Wood Species Estimated by Density

André Luis Christoforo, Francisco Antonio Rocco Lahr, Diego Henrique de Almeida, 2016 .

Microstructural design of materials for aerostatic bearings

Christopher R. Bowen, Peter Walker, Túlio Hallak Panzera, 2008 .

Epoxy composites containing CFRP powder wastes

Túlio Hallak Panzera, I. Lombillo, Paulo H. R. Borges, 2014 .

Evaluation of hybrid-short-coir-fibre-reinforced composites via full factorial design

Fabrizio Scarpa, Túlio Hallak Panzera, F. Scarpa, 2018, Composite Structures.

Ultrasonic Pulse Velocity Evaluation of Cementitious Materials

Christopher R. Bowen, André Luis Christoforo, Túlio Hallak Panzera, 2011 .

Evaluation of the Modulus of Elasticity in Damaged Wooden Beams

Victor Almeida De Araujo, André Luis Christoforo, Francisco Antonio Rocco Lahr, 2015 .

Hybrid composites based on sisal fibers and silica nanoparticles

Fabrizio Scarpa, Túlio Hallak Panzera, Juan Carlos Campos Rubio, 2018 .

FULL CHARACTERIZATION OF CALYCOPHYLLUM MULTIFLORUM WOOD SPECIE

Felipe Nascimento Arroyo, André Luis Christoforo, Francisco Antonio Rocco Lahr, 2017 .

Mechanical properties and ASR evaluation of concrete tiles with waste glass aggregate

Fabrizio Scarpa, Túlio Hallak Panzera, Paulo H. R. Borges, 2015 .

Numerical Evaluation of Longitudinal Modulus of Elasticity of Eucalyptus g randis Timber Beams

André Luis Christoforo, Francisco Antonio Rocco Lahr, Elen Aparecida Martines Morales, 2012 .

Statistical design of polymeric composites reinforced with banana fibres and silica microparticles

André Luis Christoforo, Fabrizio Scarpa, Túlio Hallak Panzera, 2013 .

Analysis of form threads using fluteless taps in cast magnesium alloy (AM60)

Carlos Henrique Lauro, Lincoln Cardoso Brandão, Túlio Hallak Panzera, 2012 .