Q. Meng

发表

Fabrication and in vitro characterization of magnetic hydroxycarbonate apatite coatings with hierarchically porous structures.

Yu Zhou, D. Jia, Yaping Guo, 2008, Acta biomaterialia.

Preparation and mechanical properties of carbon nanotube reinforced barium aluminosilicate glass–ceramic composites

Yu Zhou, Yujin Wang, F. Ye, 2006 .

Microstructural evolution of IF-steel during cold rolling

N. Hansen, Qing Liu, A. Godfrey, 2004 .

Effect of Ti content on microstructure and strength of Si3N4/Si3N4 joints brazed with Cu–Pd–Ti filler metals

Y. Zhou, Junzheng Zhang, M. Naka, 2008 .

A novel method for preparation of hollow carbon spheres under a gas pressure atmosphere

D. Jia, J. Rao, B. Liu, 2007 .

Synthesis of hollow six-armed carbon particles by a self-assembly template method

D. Jia, J. Rao, Y. Shao, 2008 .

Trace rotations of planar features with foil tilting on transmission electron micrographs

G. L’espérance, B. Hong, J. Dickson, 1994 .

Microstructure and mechanical properties of Al2O3 particle reinforced LiTaO3 piezoelectric ceramic matrix composites

Yu Zhou, D. Jia, Youfeng Zhang, 2007 .

Electrophoretic sol–gel synthesis of SrBi2Ta2O9 nanowires

Yu Zhou, D. Jia, Wen Wang, 2010 .

Microstructures and properties of SiB0.5C1.5N0.5 ceramics consolidated by mechanical alloying and hot pressing

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

Stacking faults formation mechanism of in situ synthesized TiB whiskers

Yu Zhou, D. Jia, Q. Meng, 2006 .

Side-surface structure of a commercial β-silicon carbide whisker

Jie Zhang, L. Geng, C. Yao, 2004 .

Hot working of Ti–6Al–3Mo–2Zr–0.3Si alloy with lamellar α + β starting structure using processing map

L. Geng, L. Huang, Q. Meng, 2009 .

Growth mechanism of in situ TiB whiskers in spark plasma sintered TiB/Ti metal matrix composites

Yu Zhou, D. Jia, J. Rao, 2006 .

Defects formation of the in situ reaction synthesized TiB whiskers

Yu Zhou, D. Jia, Rong Yu, 2009 .

Microstructural Characterization of In Situ TiB Whiskers in Ti MMCs Fabricated by SPS

Yu Zhou, D. Jia, Q. Meng, 2007 .

Spark plasma sintering of functionally graded material in the Ti–TiB2–B system

Yu Zhou, D. Jia, Q. Meng, 2005 .

Microstructural Characterization of Spark Plasma Sintered In Situ TiB Reinforced Ti Matrix Composite by EBSD and TEM

Yu Zhou, D. Jia, Q. Meng, 2005 .

Microstructure and mechanical properties of in situ TiB reinforced titanium matrix composites based on Ti–FeMo–B prepared by spark plasma sintering

Yu Zhou, D. Jia, Q. Meng, 2004 .

Influence of Ageing Treatment on Microstructure and Properties of 7150 Alloy

Q. Meng, H. Xian, X. Fan, 2007 .

Characterization of precipitation microstructure and properties of 7150 aluminium alloy

Z. Lai, Q. Meng, Xinmei Zhang, 2006 .

Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment

Tao Wang, Q. Meng, Bao-you Zhang, 2006 .

Evolution of Phase, Microstructure and ZrC Lattice Parameter in Solid-solution-treated W-ZrC Composite

Yu Zhou, J. Rao, Yujin Wang, 2017, Scientific Reports.

Fracture analysis of Ti¿6Al¿4V bolts

Q. Meng, Bao-you Zhang, F. Yan, 2006 .

The microstructural evolution of an Al–Zn–Mg–Cu alloy during homogenization

Q. Meng, D. Jiang, L. Zhong, 2006 .

Synthesis and formation mechanism of hollow carbon spheres encapsulating magnetite nanocrystals

D. Jia, Y. Shao, B. Liu, 2008 .

Microstructure of hot-pressed h-BN/Si3N4 ceramic composites with Y2O3–Al2O3 sintering additive

D. Jia, Daqing Wei, Q. Meng, 2007 .

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

D. Jia, Daqing Wei, Q. Meng, 2006 .

Sc3+–Lu3+‐Doped α‐SiAlONs

Yu Zhou, Chunfeng Liu, F. Ye, 2008 .

Investigation on the microstructure of self-reinforced Nd-α-sialon ceramics

Yu Zhou, Chunfeng Liu, F. Ye, 2008 .

Synthesis of 30 wt%BAS/Si 3N 4 composite by spark plasma sintering

Jingxian Zhang, F. Ye, Limeng Liu, 2008 .

Rapid synthesis of Ti alloy with B addition by spark plasma sintering

Yu Zhou, D. Jia, Q. Meng, 2005 .

Microstructure and properties of self-reinforced α-sialon ceramics doped with Lu2O3

Yu Zhou, Chunfeng Liu, F. Ye, 2008 .

Influence of titanium diboride on the microstructure and mechanical properties of silicon nitride ceramic

D. Jia, Ye Sun, Liang‐ai Huang, 2004 .

Microstructure of Different Rare-Earth-Doped α-Sialon Ceramics

Yong Liang Wang, Chongxing Liu, Yu Zhou, 2007 .

Consolidation of nanocrystalline Al-Ti alloy powders synthesized by mechanical alloying

G. Liang, E. Wang, Q. Meng, 1995 .

Thermal shock resistance of in situ formed SiC–BN composites

Zhihua Yang, Yu Zhou, D. Jia, 2008 .

A TEM analysis of the Si3N4/Si3N4 joint brazed with a Cu-Zn-Ti filler metal

Caixia Liu, Y. Zhou, J. Zhang, 2004 .

Effect of hexagonal BN on the microstructure and mechanical properties of Si3N4 ceramics

D. Jia, Ye Sun, C. Guan, 2007 .

Mechanical properties and microstructure of Al–Mg–Mn–Zr alloy processed by equal channel angular pressing at elevated temperature

Z. Lai, Dianjun Wang, J. Ning, 2008 .

Domain structures and toughening mechanism in Al2O3 matrix ceramic composites dispersed with piezoelectric LiTaO3

Yu Zhou, D. Jia, Yan’gai Liu, 2003 .

Interface structure and mechanical properties of Al2O3-20 vol% ZrO2-20 vol% SiCW ceramic composite

J. Dai, Y. Zhou, F. Ye, 1995 .

Mechanical Properties and Plasma Erosion Resistance of ZrO2p(3Y)/BN-SiO2 Ceramic Composites under Different Sintering Temperature

Daren Yu, Zhihua Yang, Yu Zhou, 2011, MSE 2011.

Study on the plasma erosion resistance of ZrO2p(3Y)/BN–SiO2 composite ceramics

Daren Yu, Zhihua Yang, Yu Zhou, 2013 .

Dislocation Behavior in ZrC Particles during Elevated Temperature Compressive Deformation of a 30 vol.% ZrCp/W Composite

Yu Zhou, G. Song, Yujin Wang, 2011 .

BBPPAmorphous Si-B-C-N Ceramics Fabricated by High Energy Ball Milling and Hot Pressing

Yu Zhou, D. Jia, Z. Yang, 2007 .

Joining of silicon nitride with a Cu76.5Pd8.5Ti15 filler alloy

Jin-qiu Zhang, M. Naka, Q. Meng, 2007 .

Stacking Faults and Growth Mechanism of In Situ TiB Whiskers and Interface Structures in SPSed TiB/Ti(FeMo) Composites

Yu Zhou, D. Jia, Q. Meng, 2007 .

Microstructural evolution, mechanical and thermal properties of TiC-ZrC-Cr3C2 composites

Yujin Wang, Xinghong Zhang, Yapeng Li, 2019, International Journal of Refractory Metals and Hard Materials.

Structure and apatite formation of microarc oxidized TiO2-based films before and after alkali-treatment by various alkali concentrations

D. Jia, Daqing Wei, Q. Meng, 2008 .

Evolution of Phase, Microstructure and ZrC Lattice Parameter in Solid-solution-treated W-ZrC Composite

Yu Zhou, J. Rao, Yujin Wang, 2017, Scientific Reports.

Sintering mechanism and dielectric properties of LiTaO3 matrix composites with the addition of Al2O3 particles

Yu Zhou, D. Jia, Yan’gai Liu, 2009 .

Effect of Al 2 O 3 Content on Dielectric Properties of Al 2 O 3 /LiTaO 3 Composite Ceramics: Effect of Al 2 O 3 Content on Dielectric Properties of Al 2 O 3 /LiTaO 3 Composite Ceramics

Yu Zhou, D. Jia, Youfeng Zhang, 2009 .

Effect of Sintering Process on Microstructure of Al2O3/LiTaO3 Composite Ceramics

Yu Zhou, D. Jia, Youfeng Zhang, 2007 .

Simulation of the large compressive deformation of metal matrix composites with misaligned whiskers

L. Geng, Junzheng Zhang, Q. Meng, 2003 .

Experimental and numerical studies of the effect of whisker misalignment on the hot compressive deformation behavior of the metal matrix composites

L. Geng, Q. Meng, A. Li, 2004 .

The characterization and formation mechanism of nanosized insoluble intermetallic phase in 2024Al alloy

G. Fan, L. Geng, Q. Meng, 2010 .