Zhiquan Wang

发表

Microstructure evolution and mechanical properties of Co coated AISI 441 ferritic stainless steel/ YSZ reactive air brazed joint

J. Qi, Bo Yang, Chun Li, 2021 .

A novel Ag–CuAlO2 sealant for reactive air brazing of 3YSZ and AISI 310S

Xiaoyang Wang, Chun Li, X. Si, 2021, Ceramics International.

Micro-alloying effects of yttrium on the microstructure and strength of silicon carbide joint brazed with chromium-silicon eutectic alloy

Z. Zhong, Haibin Zhang, Huaxin Li, 2018 .

A low-temperature sealing method for metal-supported oxide fuel cell applications: Ni–Sn transient liquid phase bonding

J. Qi, Chun Li, X. Si, 2021 .

Microstructure and mechanical properties of SiC joint with an in-situ formed SiC-TiB2 composite interlayer

Z. Zhong, Yucheng Wu, Huaxin Li, 2018, Materials Science and Engineering: A.

Interfacial microstructure and mechanical properties of SiC joints achieved by reactive air brazing using Ag-V2O5 filler

J. Qi, Chun Li, X. Si, 2019, Journal of the European Ceramic Society.

Evolution behavior of Al2O3 nanoparticles reinforcements during reactive air brazing and its role in improving the joint strength

Xiaoguo Song, X. Si, Jian Cao, 2017 .

Microstructure and mechanical strength of SiC joints brazed with Cr3C2 particulate reinforced Ag-Cu-Ti brazing alloy

Z. Zhong, Yucheng Wu, Zhixiong Zhu, 2018, Ceramics International.

Tailoring the interfacial microstructure and mechanical strength of SiC ceramic joints using joining temperature and interlayer thickness

Z. Zhong, Yucheng Wu, Huaxin Li, 2018, Materials Characterization.

Active brazing of C/C composites and single crystal Ni-based superalloy: Interfacial microstructure and formation mechanism

Xiaoyang Wang, Chun Li, X. Si, 2021 .

Microstructure and mechanical properties of Al 2 O 3 ceramic joints achieved by Ag‐SiO 2 braze in air

J. Qi, Chun Li, X. Si, 2021, International Journal of Applied Ceramic Technology.

Effect of adding of SiC particulate on the microstructure and shear strength of SiC ceramic joint brazed with Si-24Ti alloy

Z. Zhong, Haibin Zhang, Ankang Yang, 2018 .

In-situ formation of fine-grained carbide composite interlayer during diffusion bonding of SiC ceramic

Z. Zhong, Yucheng Wu, Huaxin Li, 2018, Journal of Alloys and Compounds.

Beneficial effects of B4C addition on the microstructure and mechanical properties of SiC ceramic joints diffusion bonded with Ti3SiC2

Z. Zhong, Yucheng Wu, Huaxin Li, 2019, Materials Science and Engineering: A.

Pressure-assisted direct joining of Ti3AlC2 ceramics in air

J. Qi, Bo Yang, Chun Li, 2021, Journal of the European Ceramic Society.

Ag–SiO2 - An optimized braze for robust joining of commercial coated stainless steel to ceramic solid oxide cells

R. Kiebach, Chun Li, Jian Cao, 2022, Ceramics International.

Ceramic Filter Balls Loaded with α ‐Fe2O3 and Their Application to NH3‐N Wastewater Treatment

Ji Fang, W. Gong, Zhiquan Wang, 2008 .

Oxidation behavior of ferritic stainless steel interconnect coated by a simple diffusion bonded cobalt protective layer for solid oxide fuel cells

J. Qi, Chun Li, X. Si, 2020, Corrosion Science.

Brazing YSZ ceramics by a novel SiO2 nanoparticles modified Ag filler

J. Qi, Bo Yang, Chun Li, 2020 .

Joining of Co coated ferritic stainless steel to ceramic solid oxide cells by a novel Ag-SiO2 braze

R. Kiebach, Chun Li, Jian Cao, 2022, Journal of Materials Science & Technology.