František Šimčák

发表

Analysis of possible causes of cracks initiation on barking drum

František Trebuňa, Peter Trebuňa, František Šimčák, 2014 .

The analysis of failure causes of the rotor shaft of steam turbines

Miroslav Pástor, František Trebuňa, Peter Trebuňa, 2017 .

Failure analysis of mechanical elements in steelworks equipment by methods of experimental mechanics

František Trebuňa, Peter Trebuňa, Jozef Bocko, 2010 .

Stress Analysis of a Rotating Body by Means of Photostress Method and Using Solidworks Programme

Miroslav Pástor, František Trebuňa, Peter Frankovský, 2014 .

Applications of Applied Mechanics to the Solution of Problems Connected with Transportation and Storage of Spent Nuclear Fuel

František Trebuňa, Jozef Bocko, František Šimčák, 2016 .

Defects in the Bearing Elements of the Equipment for High-pressure Die Casting

Miroslav Pástor, František Trebuňa, František Šimčák, 2016 .

Quantification of Force Effects in Dynamically Loaded Pipe Systems

František Trebuňa, Jozef Bocko, Peter Sivák, 2013 .

Dynamic Analysis of Manipulator Arm for 6-legged Robot

Ivan Virgala, František Šimčák, Zdenko Bobovský, 2013 .

Numerical and experimental modelling of carrying elements of heavy metallurgical equipments

František Trebuňa, Alexander Gmiterko, František Šimčák, 2010 .

Proposal of Methodology and Calibration of Dynamometers for Quantification of Forces in Anchor Bolts

Miroslav Pástor, František Trebuňa, Patrik Šarga, 2014 .

Analysis of Sluice Gates of Hydroelectric Power Stations

František Trebuňa, Peter Trebuňa, Jozef Bocko, 2013 .

Analysis of causes of casting pedestal failures and the measures for increasing its residual lifetime

Miroslav Pástor, František Trebuňa, Jozef Bocko, 2013 .

Methods for Verification of Safety of the Sluice Gates in Water Power Plants

František Trebuňa, Jozef Bocko, František Šimčák, 2009 .

Characteristic Entities in PhotoStress Method

František Trebuňa, Peter Frankovský, František Šimčák, 2014 .

The Knowledge Acquired by Using of Optical Methods by Strain Fields Investigation

Martin Hagara, Matúš Kalina, František Šimčák, 2013 .

Increasing of Reliability of Converter

František Trebuňa, Jozef Bocko, František Šimčák, 2006 .

Possibility of Carrying Capacity Increasing of Anchor Bolts in Heavy Equipments of Metallurgical Plants

František Trebuňa, Jozef Bocko, František Šimčák, 2013 .

Identification of causes of radial fan failure

František Trebuňa, Peter Trebuňa, Jozef Bocko, 2009 .

Residual Stress Analysis in Containers for Transport of Radioactive Materials

Miroslav Pástor, František Trebuňa, Patrik Šarga, 2015 .

Modal Analysis of Exhaust Fan Impeller

František Trebuňa, Róbert Huňady, František Šimčák, 2013 .

Failure analysis of storage tank

František Trebuňa, Jozef Bocko, František Šimčák, 2009 .

Analysis of crack initiation in the press frame and innovation of the frame to ensure its further operation

Miroslav Pástor, František Trebuňa, Peter Trebuňa, 2011 .

Design of Modifications for Constructional Elements of Manipulator Arm Aimed at Measuring of Operational Torque

Miroslav Pástor, František Trebuňa, Ladislav Vargovčík, 2015 .

Analysis of residual stresses on the transverse beam of a casting stand by means of drilling method

Peter Frankovský, František Šimčák, 2014 .

Complex approach to the vibrodiagnostic analysis of excessive vibration of the exhaust fan

Miroslav Pástor, František Trebuňa, Róbert Huňady, 2014 .

Experimental Vibration Analysis of Railcar for Spent Nuclear Fuel Transportation

František Trebuňa, Róbert Huňady, František Šimčák, 2013 .

The failure analysis of the holder of a crusher moving knife

Miroslav Pástor, František Trebuňa, Peter Trebuňa, 2017 .

Analysis of Reasons of Steam Turbogenerator Failure

Miroslav Pástor, František Trebuňa, František Šimčák, 2015 .

Decreasing of vibration amplitudes of the converter pedestal by design changes and changes in prestress of the bolted joints

František Trebuňa, Jozef Bocko, František Šimčák, 2009 .

Determination of the Possible Causes of Cracks in Pins of Quick Operating Valves in Hydroelectric Power Plant

František Trebuňa, Jozef Bocko, Patrik Šarga, 2014 .

Identification of pipes damages on gas compressor stations by modal analysis methods

František Trebuňa, Róbert Huňady, František Šimčák, 2013 .

The Strain Gage Method for Determination of Input Working Life Parameters of Pipes in Compressor Stations

František Trebuňa, Peter Trebuňa, Jozef Bocko, 2007 .

Stress and Strain Analysis in Critical Joints of the Bearing Parts of the Mobile Platform Using Tensometry

Miroslav Pástor, František Trebuňa, František Šimčák, 2016 .

Balancing of Forces in Segments of Axial Bearing by Dynamometers

Miroslav Pástor, František Trebuňa, Patrik Šarga, 2015 .

The Influence of Facet Size on the Accuracy of Modal Parameters Determined by Digital Image Correlation Technique

Martin Hagara, Róbert Huňady, František Šimčák, 2014 .