Z. Jia

发表

Texture Evolution and Dislocation Behavior in a Nickel‐Based Superalloy during Hot Compression

Yutian Ding, Zexi Gao, Z. Jia, 2020, Advanced Engineering Materials.

Degradation mechanism of magnesium alloy stent under simulated human micro-stress environment.

Qinglin Li, Z. Jia, Dexue Liu, 2018, Materials science & engineering. C, Materials for biological applications.

The Effect of the Strain Rate on the Fretting Wear Properties of Thermally Compressed Inconel 625 Alloy

Xuan Sun, Z. Jia, Jin-jin Ji, 2020, Advanced Engineering Materials.

Fretting Wear Properties of Thermally Deformed Inconel 625 Alloy

Xuan Sun, Z. Jia, Jin-jin Ji, 2020, Transactions of the Indian Institute of Metals.

Relationship between chemical composition, phase structure and piezoelectric property of BiFeO3–BaTiO3 ceramics near morphotropic phase boundary

Zhiwu Chen, Xin Wang, Zhenya Lu, 2021, Journal of Materials Science: Materials in Electronics.

Influence analysis of shot peening on hot forging die

Z. Jia, Jin-jin Ji, 2017 .

A novel TiZrNb medium entropy alloy (MEA) with appropriate elastic modulus for biocompatible materials

Z. Jia, Dexue Liu, S. Hu, 2021 .

Evolution of Twin Boundaries and Contribution to Dynamic Recrystallization and Grain Growth of Inconel 625

Yutian Ding, Zexi Gao, Z. Jia, 2019, Advanced Engineering Materials.

Hot workability and dynamic recrystallization mechanisms of pure nickel N6

Xuan Sun, Z. Jia, Jin-jin Ji, 2022, Transactions of Nonferrous Metals Society of China.

The mechanism of crack generation and propagation in the new casting alloy GH4151 during cogging

Yan Yang, Yutian Ding, Z. Jia, 2021, The International Journal of Advanced Manufacturing Technology.

Effect of Micro-scale Y Addition on the Fracture Properties of Al–Cu–Mn Alloy

Z. Jia, T. Guo, W. Ding, 2018, Chinese Journal of Mechanical Engineering.

Fabricate of High-Strength and High-Conductivity Cu–Cr–Si Alloys through ECAP-Bc and Aging Heat Treatment

Junjie Wang, Yutian Ding, Xiaoyang Tai, 2020, Materials.

Texture evolution and strengthening mechanism of single crystal copper during ECAP

Z. Jia, T. Guo, Chen Wang, 2019, Materials Science and Engineering: A.

Study of the strengthening and toughening mechanism for single-crystal copper during equal-channel angular pressing by route A

C. Wang, Z. Jia, T. Guo, 2019, Materiali in tehnologije.

Micro/nanostructure high strength and high conductivity CuCrZr alloy prepared through equal channel angular pressing and aging treatment

Yang Gao, Yutian Ding, Rui Feng, 2022, Materials Today Communications.

Phase Transformation Strengthening of Hot Extruded Inconel 625 under High-temperature Load Environment

H. Cai, Qinglin Li, Wen-Xue Wang, 2019, Journal of Wuhan University of Technology-Mater. Sci. Ed..

A Mechanism for the Evolution of Hot Compression Cracking in Inconel 625 Alloy Ingot With Respect to Grain Growth

Zexi Gao, Z. Jia, Jin-jin Ji, 2020, Advanced Engineering Materials.

Continuous dynamic recrystallization nucleation mechanism and annealing twin evolution with respect to grain growth in a nickel-based superalloy

Z. Jia, Yan-jiang Wang, Ze-xi Gao, 2023, Journal of Central South University.

Realization of ODS-Cu/T91 Tube-to-tube Joining with Rotary Friction Welding

G. Luo, Qiang Li, Wanjing Wang, 2020 .

Effect of Temperature and Strain Rate on Dynamic Recrystallization of Inconel 617 during Hot Deformation

Yutian Ding, Xuan Sun, Z. Jia, 2021, Advanced Engineering Materials.

Study on Friction and Wear Behavior of Inconel 625 Superalloy during Hot Extrusion

Yutian Ding, Sixiang Zhao, Z. Jia, 2020 .

Study of the Dynamic Recrystallization Process of the Inconel625 Alloy at a High Strain Rate

Yutian Ding, Z. Jia, Jin-jin Ji, 2019, Materials.

Microstructure Evolution and Texture Characteristics of Pure Nickel N6 During Cold Rolling Process

Xuan Sun, Z. Jia, Jin-jin Ji, 2021, Transactions of the Indian Institute of Metals.

High-temperature deformation behavior and processing map of the as-cast Inconel 625 alloy

Yutian Ding, Z. Jia, Jin-jin Ji, 2020, Rare Metals.

Influence analysis of shot peening on hot forging die

Z. Jia, Jin-jin Ji, 2016, The International Journal of Advanced Manufacturing Technology.

Performance of steel-reinforced circular concrete-filled steel tubular members under combined compression and torsion

Ee Loon Tan, Wen-Da Wang, Yan-Li Shi, 2020 .

Torsional behaviour of concrete-filled circular steel tubular members under coupled compression and torsion

Wen-Da Wang, Yan-Li Shi, Wei Xian, 2021 .

Evolution of Stacking Fault and Dislocation during Dynamic Recrystallization of Inconel 625 Alloy

Z. Jia, Jin-jin Ji, Sidan Li, 2022, Advanced Engineering Materials.

Influence of die parameters on internal voids during multi-wedge-multi-pass cross-wedge rolling

Z. Jia, Jin-jin Ji, Baolin Wei, 2020, The International Journal of Advanced Manufacturing Technology.

Effects of Deformation Temperature on Dynamic Recrystallization and Twinning of Incoloy 800H Alloy

Z. Jia, Jin-jin Ji, Pengfei Zhang, 2024, Transactions of the Indian Institute of Metals.

Tribo-oxidation mechanism of gradient nanostructured Inconel 625 alloy during high-temperature wear

Z. Jia, Jin-jin Ji, Yan-jiang Wang, 2024, Wear.