H. Kim

发表

Practical microstructure-informed dual-scale simulation for predicting hole expansion failure of hyper-burring steel

Kyung Il Kim, Heung Nam Han, K. Oh, 2019, International Journal of Mechanical Sciences.

Correlation between macroscale tensile properties and small-scale intrinsic mechanical behavior of Mo-added Fe–Mn–Al–C lightweight steels

J. Moon, Jaeeun Lee, H. Kim, 2019 .

Microstructural Characterization of Cold-Drawn Cu-Ni-Si Alloy Having High Strength and High Conductivity

Miyoung Kim, H. Baik, Seung-Zeon Han, 2019, Journal of Alloys and Compounds.

Sintering of binderless WC–Mo2C hard materials by rapid sintering process

I. Shon, Hyun-Kuk Park, In-Yong Ko, 2008 .

Consolidation of binderless WC–TiC by high frequency induction heating sintering

K. Woo, I. Shon, Dong-Ki Kim, 2008 .

Sintering of ultra-fine tetragonal yttria-stabilized zirconia ceramics

Z. A. Munir, I. Shon, In-Yong Ko, 2007 .

Fabrication of WC–8 wt.%Co hard materials by two rapid sintering processes

I. Shon, J. Doh, In-Yong Ko, 2007 .

Mechanical Properties and Consolidation of WC-8wt.%Ni Hard Materials by HFIHS and PCAS

I. Shon, J. Doh, Jinsik Yoon, 2007 .

One-step synthesis and densification of nanostructured TiSi2–SiC composite from mechanically activated (TiC + 3Si) powders by high-frequency-induced heated combustion

K. Hong, I. Shon, Hyun-Kuk Park, 2007 .

Rapid sintering of ultra fine WC and WC-Co hard materials by high-frequency induction heated sintering and their mechanical properties

I. Shon, J. Doh, Jinsik Yoon, 2007 .

Consolidation of ultra fine WC and WC–Co hard materials by pulsed current activated sintering and its mechanical properties

I. Shon, J. Doh, Jinsik Yoon, 2007 .

Rapid sintering process and mechanical properties of binderless ultra fine tungsten carbide

I. Shon, J. Doh, Jinsik Yoon, 2006 .

Rapid sintering of nanocrystalline 8 mol.%Y2O3-stabilized ZrO2 by high-frequency induction heating method

I. Shon, In-Yong Ko, H. Kim, 2006 .

One step synthesis and densification of ultra-fine WC by high-frequency induction combustion

Z. A. Munir, Sang‐Kwon Lee, I. Shon, 2006 .

Comparison of sintering behavior and mechanical properties between WC−8Co and WC−8Ni hard materials produced by high-frequency induction heating sintering

I. Shon, J. Doh, Jinsik Yoon, 2006 .

Consolidation and properties of binderless sub-micron tungsten carbide by field-activated sintering

Z. A. Munir, J. Garay, I. Shon, 2004 .

Sintering of nanophase WC–15vol.%Co hard metals by rapid sintering process

I. Shon, H. Kim, D. Oh, 2004 .

Synthesis of WC and dense WC–5 vol.% Co hard materials by high-frequency induction heated combustion

I. Shon, Jiang Guojian, H. Kim, 2004 .

Synthesis of WC and dense WC–xvol.%Co hard materials by high-frequency induction heated combustion method

I. Shon, H. Kim, D. Oh, 2004 .

Synthesis of dense MoSi2 by high-frequency induction heated combustion and its mechanical properties

I. Shon, Choong-Do Park, J. Jeong, 2003 .

Investigation of the unloading yield effect in 7075 Al alloys based on microstructural and digital image correlation analysis

W. Woo, Myoung-Gyu Lee, Sung-Tae Hong, 2021 .

One step synthesis of dense MoSi2–SiC composite by high-frequency induction heated combustion and its mechanical properties

I. Shon, Jinsik Yoon, H. Kim, 2005 .

Dense WSi2 and WSi2–20 vol.% ZrO2 composite synthesized by pressure-assisted field-activated combustion

Z. A. Munir, I. Shon, H. Kim, 2001 .

Simultaneous synthesis and densification of Ti5Si3 and Ti5Si3–20 vol% ZrO2 composites by field-activated and pressure-assisted combustion

Zuhair A. Munir, Z. A. Munir, I. Shon, 1999 .

Simultaneous pulsed current activated combustion synthesis and densification of NbSi2–SiC composite

I. Shon, Hyun-Kuk Park, Jinsik Yoon, 2008 .

Synthesis of dense WSi2 and WSi2-xvol.%SiC composites by high-frequency induction heated combustion and its mechanical properties

I. Shon, Jinsik Yoon, In-Yong Ko, 2006 .

Simultaneous synthesis and consolidation process of ultra-fine WSi2–SiC and its mechanical properties

I. Shon, Jinsik Yoon, H. Kim, 2005 .

Fabrication and Mechanical Properties of Dense WSi 2 -20vol.%SiC Composite by High-Frequency Induction-Heated Combustion Synthesis

Sang‐Kwon Lee, I. Shon, H. Kim, 2005 .

Synthesis of WSi2–ZrO2 and WSi2–Nb composites by field-activated combustion

Z. A. Munir, I. Shon, H. Kim, 2001 .

Rapid sintering of ultra-fine WC-10 wt% Co by high-frequency induction heating

Zuhair A. Munir, Z. A. Munir, I. Shon, 2005 .

Electropulsing Treatment on Enhancement of Electrical Conductivity of Screen-Printed Ag Wire

Sung-Tae Hong, Howook Choi, H. Kim, 2019, Metals and Materials International.

One step synthesis and consolidation of WC-10 vol.% Co hard material

Charn-Woon Park, I. Shon, Hwan-Cheol Kim, 2002 .

Rapid sintering of ultrafine WC-Ni cermets

Zuhair A. Munir, Z. A. Munir, I. Shon, 2006 .

One-step synthesis of dense tungsten carbide-cobalt hard materials

Z. A. Munir, I. Shon, H. Kim, 2002 .

Simultaneous synthesis and densification of WSi2 and WSi2-20vol.%Nb composite by field-activated and pressure-assisted combustion

I. Shon, Hwan-Cheol Kim, I. J. Shon, 2000 .

Sintering behavior and mechanical properties of binderless WC-TiC produced by pulsed current activated sintering

I. Shon, Dong-Ki Kim, In-Yong Ko, 2007 .

Simultaneous synthesis and densification of MoSi2-20vol.%Nb composite and MoSi2-20vol.%ZrO2 composite by field-activated and pressure-assisted combustion

I. Shon, H. Kim, D. Rho, 1999 .

Prediction of precipitation kinetics and strengthening in FeMnAlC lightweight steels

Kyeongjae Jeong, J. Moon, Jaeeun Lee, 2021 .

Simulation of κ-Carbide Precipitation Kinetics in Aged Low-Density Fe–Mn–Al–C Steels and Its Effects on Strengthening

S. Park, Miyoung Kim, Seongjun Park, 2018, Metals and Materials International.

Fabrication of ultrafine binderless WC and WC-Ni hard materials by a pulsed current activated sintering method

I. Shon, J. Doh, Jinsik Yoon, 2006 .