Douglas S. Cairns

发表

Effects of defects in composite wind turbine blades – Part 2: Progressive damage modeling of fiberglass-reinforced epoxy composites with manufacturing-induced waves

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2017 .

Effects of defects in composite wind turbine blades – Part 3: A framework for treating defects as uncertainty variables for blade analysis

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2018 .

Effects of defects in composite wind turbine blades – Part 1: Characterization and mechanical testing

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2017 .

A Model for an Industry/University Strategic Alliance in the Classroom

Douglas S. Cairns, Vic A. Cundy, M. Mohaghegh, 2000 .

Progressive Damage Modeling of Fiberglass/Epoxy Compositeswith Manufacturing Induced Waves Common to Wind Turbine Blades

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2017 .

Characterization and Mechanical Testing of Manufacturing Defects Common to Composite Wind Turbine Blades

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2017 .

Probabilistic Design of Wind Turbine Blades with Treatment ofManufacturing Defects as Uncertainty Variables in a Framework

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2017 .

Process modeling and validation of resin infusion type manufacturing

Douglas S. Cairns, Daniel B. Mastbergen, 2007 .

Characterization of Manufacturing Defects Common to Composite Wind Turbine Blades: Flaw Characterization

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2011 .

Numerical Simulation of High Velocity Impact of Circular Composite Laminates

Douglas S. Cairns, Jong Heon Kim, In-Gul Kim, 2017 .

Composite Wind Turbine Blade Effects of Defects: Part B— Progressive Damage Modeling of Fiberglass/Epoxy Laminates with Manufacturing Induced Flaws

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2012 .

Embedded Sensors for Composite Wind Turbine Blades

Douglas S. Cairns, Nathan Palmer, Jonathan Ehresman, 2010 .

QUANTIFICATION OF PROCESSING PARAMETERS FOR WIND TURBINE BLADES

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 2003 .

Low Cost Inspection for Improved Blade Reliability

Douglas S. Cairns, Jon Ehresman, Nathan Palmer, 2009 .

Effects of Defects: Part A - Development of a Protocol for Defect Risk Management & Improved Reliability of Composite Structures

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2012 .

Design Considerations for Buckling in ComDosite Wind Turbine Blades

Douglas S. Cairns, Ladean R. Mckittrick, John F. Mandell, 2000 .

Advanced wind turbine blade structure development program at Montana State University

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 1997 .

Manufacturing Defects Common to Composite Wind Turbine Blades: Effects of Defects

Jared W. Nelson, Douglas S. Cairns, 2011 .

Prediction of Delamination in Wind Turbine Blade Structural Details

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 2003 .

Design/manufacturing synthesis of a composite blade for the AOC 15/50 wind turbine

Douglas S. Cairns, Ladean R. Mckittrick, R. VanLuchene, 1999 .

Effects of Defects Part A: Stochastic Finite Element Modeling of Wind Turbine Blades with Manufacturing Defects for Reliability Estimation

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2013 .

Low Cost Inspection for Improved Wind Turbine Blade Reliability

Douglas S. Cairns, Jon Ehresman, Nathan Palmer, 2009 .

Wind turbine composite blade manufacturing : the need for understanding defect origins, prevalence, implications and reliability.

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2011 .

Use of Statistical Learning in a Reliability Program for Risk Assessment of Composite Structures with Defects

Jared W. Nelson, Trey W. Riddle, Douglas S. Cairns, 2013 .

EFFECTS OF MODELING ASSUMPTIONS ON THE ACCURACY OF SPECTRUM FATIGUE LIFETIME PREDICTIONS FOR A FIBERGLASS LAMINATE

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 2002 .

EFFECTS OF STRUCTURAL DETAILS ON DELAMINATION AND FATIGUE LIFE OF FIBERGLASS LAMINATES

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 1998 .

Biaxial testing of composite tubes

Douglas S. Cairns, S. R. Swanson, G. R. Toombes, 1985 .

Fatigue of Composite Materials and Substructures for Wind Turbine Blades

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 2002 .

Thick composite plates subjected to lateral loading

Douglas S. Cairns, Paul A. Lagace, D. Cairns, 1987 .

SELECTION OF FIBERGLASS MATRIX RESINS FOR INCREASED TOUGHNESS AND ENVIRONMENTAL RESISTANCE IN WIND TURBINE BLADES

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 2000 .

Selection of reinforcing fabrics for wind turbine blades

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 1999 .

Static and Dynamic Mode II Strain Energy Release Rates in Toughened Thermosetting Composite Laminates

Douglas S. Cairns, 1992 .

Theoretical and experimental response of composite laminates with delaminations loaded in compression

Douglas S. Cairns, Pierre J. Minguet, Mohamed G Abdallah, 1994 .

Response of automated tow placed laminates to stress concentrations

Douglas S. Cairns, Larry B. Ilcewicz, Tom Walker, 1993 .

Analysis of a Composite Blade Design for the AOC 15/50 Wind Turbine using a Finite Element Model

Douglas S. Cairns, Ladean R. Mckittrick, Donald A. Rabern, 2001 .

A Model for the Compressive Failure of Composite Materials

Douglas S. Cairns, Todd O. Williams, D. Cairns, 1994 .

Evaluation of Hand Lay-Up and Resin Transfer Molding in Composite Wind Turbine Blade Manufacturing

Douglas S. Cairns, D. Cairns, Jon D. Shramstad, 2000 .

Fluid flow modeling of resin transfer molding for composite material wind turbine blade structures

Douglas S. Cairns, Scott M. Rossel, 2004 .

Evaluation of hand lay-up and resin transfer molding in composite wind turbine blade structures

Douglas S. Cairns, John F. Mandell, Jon Skramstad, 2001 .

Modeling of resin transfer molding of composite materials with oriented unidirectional plies

Douglas S. Cairns, John F. Mandell, Dell R Humbert, 1999 .

Transient response of graphite/epoxy and Kevlar/epoxy laminates subjected to impact

Douglas S. Cairns, Paul A. Lagace, D. Cairns, 1988 .

Residual Tensile Strength of Graphite/Epoxy and Kevlar/Epoxy Laminates with Impact Damage

Douglas S. Cairns, Paul A. Lagace, 1990 .

SPECTRUM FATIGUE LIFETIME AND RESIDUAL STRENGTH FOR FIBERGLASS LAMINATES IN TENSION

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 2001 .

Fracture of Skin/Stiffener Intersections in Composite Wind Turbine Structures

Douglas S. Cairns, John F. Mandell, Daniel D. Samborsky, 1998 .

A Simple, Elasto-Plastic Contact Law for Composites

Douglas S. Cairns, D. Cairns, 1991 .