Lina Yu

发表

Mechanism for stress relaxation behavior of the residual stress improving treatments with water jet peening and buffing

K. Saida, K. Nishimoto, Naoki Chigusa, 2020 .

Ti transition zone on the interface between TiC and aluminum melt and its influence on melt viscosity

Xiangfa Liu, Lina Yu, 2007 .

The relationship between viscosity and refinement efficiency of pure aluminum by Al–Ti–B refiner

Xiangfa Liu, Lina Yu, 2006 .

The influence of forming processes on the distribution and morphologies of TiC in Al–Ti–C master alloys

Guoqun Zhao, H. Ding, Xiangfa Liu, 2007 .

Influence of zirconium on grain refining efficiency of Al–Ti–C master alloys

H. Ding, Xiangfa Liu, Lina Yu, 2007 .

Instability of TiC and TiAl3 compounds in Al-10Mg and Al-5Cu alloys by addition of Al-Ti-C master alloy

Xiangfa Liu, Lina Yu, Zhenqing Wang, 2006 .

Grain refinement of A356 alloy by AlTiC/AlTiB master alloys

X. Bian, Xiangfa Liu, Lina Yu, 2005 .

A new nucleation mechanism of primary Si by peritectic-like coupling of AlP and TiB2 in near eutectic Al–Si alloy

H. Ding, X. Bian, Xiangfa Liu, 2007 .

A new nucleation mechanism of primary Si by like-peritectic coupling of AlP and Al4C3 in near eutectic Al–Si alloy

H. Ding, X. Bian, Xiangfa Liu, 2007 .

Quantitative evaluation of reheat cracking susceptibility by in situ observation and measurement using laser confocal microscope*

K. Saida, K. Nishimoto, Lina Yu, 2017 .

Implementation of the quantitative evaluation method of the tempering effect during heating and cooling processes in post-weld heat treatment

K. Saida, K. Nishimoto, T. Sakai, 2016 .

Implementation of the Quantitative Evaluation Method of the Tempering Effect during Heating and Cooling Processes in Post Weld Heat Treatment

K. Saida, K. Nishimoto, T. Sakai, 2014 .

Quantitative Evaluation of Reheat Cracking Susceptibility by in-situ observation and measurement using laser confocal microscope

K. Saida, K. Nishimoto, Lina Yu, 2014 .

Neural Network Prediction of Hardness in HAZ of Temper Bead Welding Using the Proposed Thermal Cycle Tempering Parameter (TCTP)

M. Mochizuki, K. Saida, K. Nishimoto, 2011 .

Quantitative Consideration for the Tempering Effect during Multi-pass Thermal Cycle in HAZ of Low-Alloy Steel

M. Mochizuki, K. Saida, K. Nishimoto, 2011 .

Neural network-based hardness and toughness prediction in HAZ of temper bead welding repair technology

M. Mochizuki, K. Saida, K. Nishimoto, 2013 .

Microstructural modification and mechanical property improvement in friction stir zone of thixo-molded AE42 Mg alloy

K. Nakata, J. Liao, Lina Yu, 2009 .

Microstructures and Mechanical Properties in Friction Stir Zone of Thixo-Molded AS41 Mg Alloy

K. Nakata, J. Liao, Lina Yu, 2009 .

Application of neural network-based hardness prediction method to HAZ of A533B steel produced by laser temper bead welding

M. Mochizuki, K. Saida, K. Nishimoto, 2017, Welding in the World.

Hardness Prediction of HAZ in Temper Bead Welding by Non-Consistent Layer Technique

M. Mochizuki, K. Saida, K. Nishimoto, 2014 .

Hardness Prediction System for Multi-pass Weld Metal of Low-Alloy Steel Using Neural Network

K. Saida, K. Nishimoto, Lina Yu, 2022, Metallurgical and Materials Transactions A.

Neural network-based HAZ hardness prediction system for multi-layer welding extended its application to various steels

K. Saida, K. Nishimoto, Lina Yu, 2017 .

Prediction of hardness in HAZ of multi-pass welds in low-alloy steel using Neural Network

M. Mochizuki, K. Saida, K. Nishimoto, 2011 .

Hardness Prediction of the Heat-Affected Zone in Multilayer Welded SUS316 Stainless Steel Based on Dislocation Density Change Behavior

K. Saida, K. Nishimoto, Lina Yu, 2024, Metallurgical and Materials Transactions A.