T. Hasegawa

发表

Deformation behaviour and dislocation structures upon stress reversal in polycrystalline aluminium

S. Karashima, T. Hasegawa, T. Yakou, 1975 .

Effects of stress reversal and thermal recovery on stress vs strain behavior in aluminum

T. Hasegawa, T. Yakou, 1980 .

Forward and reverse rearrangements of dislocations in tangled walls

U. F. Kocks, T. Hasegawa, T. Yakou, 1986 .

Relation between local necking and cavitation during high-temperature tensile deformation of polycrystalline pure aluminum

Y. Tanaka, T. Hasegawa, T. Morita, 2009 .

High-temperature creep rate and dislocation structure in a dilute copper-aluminium alloy

S. Karashima, T. Hasegawa, Y. Ikeuchi, 1973 .

Transmission Electron Microscope Studies on the Behaviours of Dislocations during Creep Deformation of Copper Single Crystals

S. Karashima, T. Hasegawa, H. Sato, 1970 .

Machinability of aluminum-SiC particle composites during cutting with monocrystal diamond tools

N. Nishiwaki, Tohru Takahashi, T. Hasegawa, 1996 .

Present State of Research on the Bauschinger Effect

T. Hasegawa, T. Yakou, 1984 .

Origin of superplastic elongation in aluminum alloys produced by mechanical milling

T. Nagai, T. Hasegawa, T. Yasuno, 1998 .

Compression Behavior of L1 2 Modified Titanium Trialuminides Alloyed with Chromium and Iron

Tohru Takahashi, T. Hasegawa, 2000 .

Alloying effect of vanadium on the structure and strength of γ-phase titanium aluminides with aluminum-rich compositions

Tohru Takahashi, T. Hasegawa, K. Hasegawa, 1997 .

Alloying Effect of Vanadium Upon Structure and Strength of σ-Phase Titanium Trialuminide

Tohru Takahashi, T. Hasegawa, K. Iwami, 1996 .

STRENGTHENING MECHANISMS IN ALUMINUM-CERAMIC PARTICLE COMPOSITE ALLOYS PRODUCED BY MECHANICAL ALLOYING

Tohru Takahashi, T. Hasegawa, T. Yakou, 1992 .

Mechanical properties of L12 modified titanium trialuminides alloyed with chromium, iron and vanadium

K. Tominaga, Tohru Takahashi, T. Hasegawa, 2002 .

Mechanical Properties and Strengthening Mechanisms of Powder Metallurgy Alloys Produced by Mechanical Alloying

T. Hasegawa, T. Miura, 1993 .

Strength of Aluminum Alloys Produced by a Mechanical Alloying Process

T. Shibuya, T. Hasegawa, T. Yakou, 1989 .

Change in Dislocation Structure during Cyclic Straining of Polycrystalline Aluminium at High Temperatures

S. Karashima, T. Hasegawa, T. Yakou, 1978 .

Orientation Dependence of the Bauschinger Effect in Aluminium Single Crystals

S. Karashima, T. Hasegawa, T. Yakou, 1977 .

“Region of constant flow stress” during compression of aluminium polycrystals prestrained by tension

T. Hasegawa, T. Yakou, 1974 .

A Unified Representation of Stress-Strain Curves in Reversed Direction of Prestrained Cell-Forming Metals

U. F. Kocks, T. Hasegawa, T. Yakou, 1986 .

The Effect of Deformation Temperature on the Bauschinger Effect in Polycrystalline Aluminium

S. Karashima, T. Hasegawa, T. Yakou, 1976 .

Stagnation of Strain Hardening During Reversed Straining of Prestrained Aluminium, Copper and Iron

S. Karashima, T. Hasegawa, T. Yakou, 1985 .

Internal Stress and Dislocation Structure during Sigmoidal Transient Creep of a Copper–16 at.-% Aluminium Alloy

S. Karashima, T. Hasegawa, Y. Ikeuchi, 1972 .

Microstructural Studies on Tensile Fracture of an Aligned Al–Al3Ni Eutectic Composite

T. Hasegawa, T. Yakou, Nobuaki Go, 1988 .

Length changes and stress effects during recovery of deformed aluminum

U. F. Kocks, T. Hasegawa, T. Yakou, 1982 .

Electron microscope study of stacking fault energies in Cu-11.5 and 16.0 At. Pct Al alloys at temperatures between 20 and 700°C

S. Karashima, T. Hasegawa, Kaoru Asou, 1974, Metallurgical and Materials Transactions B.

Etch-Pit Studies of the Dislocation Structures Developed during Creep Deformation of Copper Single Crystals

S. Karashima, T. Hasegawa, Ryuzo Hasegawa, 1970 .

Effects of Al 3 Ni Dispersion State on the Bauschinger Effect in an Al-6 mass%Ni Alloy

T. Hasegawa, T. Yakou, 1986 .

Substructure formation and nonuniformity in strain during high temperature creep of copper single crystals

S. Karashima, T. Hasegawa, Ryuzo Hasegawa, 1971, Metallurgical Transactions.

The Effects of Thermal Cyclic Annealing in Copper Single Crystals

S. Karashima, T. Hasegawa, Y. Ishii, 1970 .

Thermal Recovery of Dislocations and Nature of Uniform Elongation during High Temperature Deformation of a Mechanically Milled Al-1.1 mol%Mg-1.2 mol%Cu Alloy

K. Okazaki, T. Hasegawa, Wakana Uchino, 2003 .

Deformation parameters governing tensile elongation for a mechanically milled Al–1.1at.%Mg–1.2at.%Cu alloy tested in tension at constant true strain rates

K. Okazaki, T. Hasegawa, T. Takahashi, 2000 .

Microstructural Study of Grain Boundary Cavitation during High Temperature Deformation of Al-4.5%Mg Alloy

K. Kawaguchi, T. Hasegawa, T. Yakou, 1991 .

High-temperature intergranular crack growth during biaxial loading in type 316 stainless steel

K. Ishii, T. Hasegawa, T. Yakou, 1986 .

X-Ray Studies of the Substructure Formed during Creep Deformation of Copper Single Crystals

S. Karashima, T. Hasegawa, H. Sato, 1970 .

Grain size effect on thermal recovery during high temperature deformation of aluminum tested at constant true strain rates

K. Okazaki, T. Hasegawa, Y. Sakurai, 2003 .

Uniform tensile elongation obtained from experiment and its estimation using dislocation dynamics parameters

K. Okazaki, T. Hasegawa, 2001 .

Analysis of the temperature dependence of tensile elongation for a mechanically milled Al–1.1 at.%Mg–1.2 at.%Cu alloy by a dislocation dynamics approach

K. Okazaki, Tohru Takahashi, T. Hasegawa, 1999 .

Studies on the Substructure Developed during Creep Deformation of Copper Crystals

H. Oikawa, S. Karashima, T. Hasegawa, 1967 .

Metallographic Structure and Mechanical Properties in Vanadium Modified Titanium Trialuminides

Tohru Takahashi, T. Hasegawa, K. Endo, 1992 .

On Dislocation Motion and Creep Rate in High-Temperature Steady-State Creep of Copper Single Crystals

S. Karashima, T. Hasegawa, H. Sato, 1969 .

Dislocation Structures Developed during Creep Deformation of Copper Single Crystals

S. Karashima, T. Hasegawa, Ryuzo Hasegawa, 1969 .

Electron Microscope Observation of the Substructure Developed during Creep Deformation of Copper Single Crystals

S. Karashima, T. Hasegawa, H. Sato, 1969 .

Three-Dimensional Observation of the Substructure Developed during Creep Deformation of Copper Single Crystals

S. Karashima, T. Hasegawa, H. Sato, 1969 .

Thermal Cyclic Annealing of Copper Single Crystals

S. Karashima, T. Hasegawa, Y. Ishii, 1969 .

Studies on the Substructure Developed during Creep of Aluminium

S. Karashima, T. Hasegawa, M. Yokota, 1968 .

Relation between wear of sintered tools and particle hardness in tools and work materials during cutting of particle strengthened aluminum composites.

N. Nishiwaki, T. Hasegawa, T. Miura, 1994 .

Solid-Solution Strengthening Effect of Vanadium Addition to Iron-Modified L1 2 Titanium Trialuminides

Tohru Takahashi, T. Hasegawa, 1994 .

A comparison of the mechanical properties of ferrocement in flexure for square and hexagonal meshes

M. Z. Hossain, T. Hasegawa, M. Hossain, 1998 .

Experimental estimation of crack tip stresses during high temperature straining of type 316 stainless steel

K. Ishii, T. Hasegawa, T. Yakou, 1987 .

Analysis of strain rate dependence of tensile elongation for a mechanical milling Al–1.1Mg–1.2Cu alloy tested at 748 K from a dislocation dynamics viewpoint

K. Okazaki, T. Hasegawa, 1999 .