C. Slater

发表

Effect of compression temperature on deformation of CaO–CaS–Al2O3–MgO inclusions in pipeline steel

Lifeng Zhang, Zushu Li, Ying Ren, 2021, Journal of Materials Research and Technology.

A Scale-up Study on Chemical Segregation and the Effects on Tensile Properties in Two Medium Mn Steel Castings

X. Xu, D. Dye, C. Davis, 2021, Metallurgical and Materials Transactions A.

Segregation Neutralised Steels: Microstructural Banding Elimination from Dual-Phase Steel Through Alloy Design Accounting for Inherent Segregation

C. Davis, C. Slater, Bharath Bandi, 2022, Metallurgical and Materials Transactions A.

Control of as-cast microstructure morphology of high silicon electrical steels produced through a horizontal belt casting process simulator

C. Davis, C. Slater, Bharath Bandi, 2020 .

Retaining {100} fibre texture in electrical steel via strain-induced boundary migration recrystallisation.

C. Davis, C. Slater, M. Ji, 2019, Journal of Physics: Conference Series.

Thermomechanical Processing Map in Retaining {100}//ND texture via Strain-Induced Boundary Migration Recrystallization Mechanism

C. Davis, C. Slater, M. Ji, 2020, Metallurgical and Materials Transactions A.

Optimising compression testing for strain uniformity to facilitate microstructural assessment during recrystallisation

C. Davis, N. Tamanna, C. Slater, 2021 .

The influence of alloy composition on the as-cast grain structure in near net shape low-density steels

C. Davis, C. Slater, Neil Hollyhoke, 2019 .

On the Evolution of Primary Gamma Prime Precipitates During High Temperature and High Strain Rate Deformation and Subsequent Heat Treatment in the Ni-Based Superalloy, RR1000

G. West, N. D’Souza, W. Li, 2019, Metallurgical and Materials Transactions A.

A novel approach for interpreting the solidification behaviour of peritectic steels by combining CSLM and DSC

B. Santillana, S. Clark, S. Sridhar, 2017 .

Using confocal scanning laser microscopy to characterise as-cast microstructures using cooling rates representative of thin slab direct cast steels

C. Davis, C. Slater, 2016 .

Effect of Thermal History on the Deformation of Non-metallic Inclusions During Plain Strain Compression

Lifeng Zhang, Zushu Li, Feng-xiao Liu, 2021, Metallurgical and Materials Transactions B.

Effect of Compression Reduction on Deformation of CaO–CaS–Al2O3–MgO Inclusions in Solid and Semi‐Solid Steel

Lifeng Zhang, Zushu Li, Fenggang Liu, 2021, steel research international.

Near Net Shape Casting: Is It Possible to Cast Too Thin?

C. Davis, C. Slater, 2020, Metallurgical and Materials Transactions B.

Development of Desirable Fine Ferrite Grain Size and Random Second Phase Dual-Phase Steel Microstructures Using Composition and/or Processing Modifications

C. Davis, D. Farrugia, C. Slater, 2022, Metals.

The Influence of Segregation of Mn on the Recrystallization Behavior of C-Mn Steels

C. Davis, C. Slater, A. Mandal, 2019, Metallurgical and Materials Transactions B.

Compression set of thermoplastic polyurethane under different thermal–mechanical-moisture conditions

M. Strangwood, C. Davis, C. Slater, 2011 .

Segregation Neutralised Steels: Microstructural Banding Elimination from Dual-Phase Steel Through Alloy Design Accounting for Inherent Segregation

C. Davis, C. Slater, Bharath Bandi, 2022, Metallurgical and Materials Transactions A.

Chemically Induced Solidification: A New Way to Produce Thin Solid-Near-Net Shapes

C. Davis, S. Sridhar, S. Spooner, 2016, Metallurgical and Materials Transactions B.

Influence of Electrical Steel Grade on Different Types of Traction Motors

J. Soulard, C. Davis, C. Slater, 2022, 2022 International Conference on Electrical Machines (ICEM).

The static and dynamic behaviour of carbon fibre composites used in golf club shafts

C. Slater, 2012 .

The quasi-static and dynamic testing of damping in golf clubs shafts fabricated from carbon fibre composites

Steve R. Otto, Martin Strangwood, Carl Slater, 2010 .

The use of infrared thermography to detect thermal instability during solidification of peritectic steels

B. Santillana, S. Sridhar, C. Slater, 2019, Materials Characterization.

Joining Technologies for Aluminium Castings—A Review

Qudong Wang, X. Hou, Yongbing Li, 2023, Coatings.

Surface Tension Gradients Induced by Temperature: The Thermal Marangoni Effect

M. Baptista, M. Politi, M. Gugliotti, 2004 .

Effect of Sample Geometry on Strain Uniformity and Double Hit Compression Tests for Softening Kinetics Determination

N. Tamanna, C. Slater, C. Davis, 2022, steel research international.

A novel forming technique to coforge bimetal components into complex geometries

I. Hurtado, C. Slater, A. Sánchez, 2020, Manufacturing Letters.

Registration between DCT and EBSD datasets for multiphase microstructures

Denmark, Diamond Light Source Ltd., U. Birmingham, 2023, Materials Characterization.

The static and dynamic stiffness behaviour of composite golf shafts and their constituent materials

Eric S. Wallace, Nils F. Betzler, Steve R. Otto, 2011 .

Identifying Optimal Hot Forming Conditions for AA6010 Alloy by Means of Elevated Temperature Tensile Testing

H. Kotadia, C. Slater, S. Dhara, 2022, Metals.

N 93-18836 A COMPARISON OF VISCOELASTIC DAMPING MODELS

Joseph, C. Slater, 2022 .

Preliminary Study on the Capability of the Novel Near Solidus Forming (NSF) Technology to Manufacture Complex Steel Components

I. Hurtado, C. Slater, A. Sánchez, 2020, Materials.

A Preliminary Study on the Quality of Joining AISI 316 and AISI 3415 Steel by the near Solidus Forming Process

I. Hurtado, C. Slater, A. Sánchez, 2023, Metals.

Characterisation of the Solidification of a Molten Steel Surface Using Infrared Thermography

C. Davis, S. Sridhar, C. Slater, 2019, Metals.

Rapid alloy prototyping for strip steel development: DP800 steel case study

C. Davis, D. Farrugia, S. Connolly, 2021, Ironmaking & Steelmaking.

Grain-level effects on in-situ deformation-induced phase transformations in a complex-phase steel using 3DXRD and EBSD

H. Vashishtha, C. Slater, James A. D. Ball, 2023, Acta Materialia.