O. Wedemeyer

发表

Selective leaching of nickel and chromium from Type 316 austenitic steel in oxygen-containing lead–bismuth eutectic (LBE)

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2014 .

Creep of 316L austenitic steel at 450-550°C in static lead-bismuth eutectic covered by argon-hydrogen gas

M. Yurechko, C. Schroer, J. Konys, 2021, Journal of Nuclear Materials.

Corrosion Interaction of 9%Cr Ferritic/Martensitic Steels at 450 and 550 °C With Flowing Pb–Bi Eutectic Containing 10−7 Mass % Dissolved Oxygen

C. Schroer, J. Konys, V. Tsisar, 2019, Journal of Nuclear Engineering and Radiation Science.

Corrosion in Iron and Steel T91 Caused by Flowing Lead–Bismuth Eutectic at 400 °C and 10−7 Mass% Dissolved Oxygen

C. Schroer, J. Konys, V. Tsisar, 2019, Journal of Nuclear Engineering and Radiation Science.

Effect of Structural State and Surface Finishing on Corrosion Behavior of 1.4970 Austenitic Steel at 400 and 500 °C in Flowing Pb-Bi Eutectic With Dissolved Oxygen

C. Schroer, J. Konys, V. Tsisar, 2018, Journal of Nuclear Engineering and Radiation Science.

Characterization of corrosion phenomena and kinetics on T91 ferritic/martensitic steel exposed at 450 and 550 °C to flowing Pb-Bi eutectic with 10−7 mass% dissolved oxygen

C. Schroer, J. Konys, V. Tsisar, 2017 .

Oxidation and dissolution of iron in flowing lead–bismuth eutectic at 450 °C

C. Schroer, J. Konys, O. Wedemeyer, 2012 .

Development of oxygen meters for the use in lead–bismuth

H. Muscher, O. Wedemeyer, J. Konys, 2001 .

Steel T91 subjected to static stress in lead-bismuth eutectic at 450–550 °C and low oxygen concentration

M. Yurechko, C. Schroer, J. Konys, 2018, Journal of Nuclear Materials.

Compatibility behavior of EUROFER steel in flowing Pb–17Li

W. Krauss, J. Konys, H. Steiner, 2009 .

Corrosion behaviour of Al based tritium permeation barriers in flowing Pb?17Li

J. Konys, O. Wedemeyer, H. Glasbrenner, 2002 .

Comparison of corrosion behavior of bare and hot-dip coated EUROFER steel in flowing Pb-17Li

W. Krauss, J. Konys, O. Wedemeyer, 2007 .

Modeling of oxidation of structural materials in LBE systems

C. Schroer, J. Konys, H. Steiner, 2008 .

Corrosion behavior of austenitic steels 1.4970, 316L and 1.4571 in flowing LBE at 450 and 550 °C with 10-7 mass% dissolved oxygen

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2014 .

Silicon-containing ferritic/martensitic steel after exposure to oxygen-containing flowing lead–bismuth eutectic at 450 and 550 °C

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2016 .

Measurement of oxygen activities in eutectic lead-bismuth by means of the EMF method

H. Muscher, O. Wedemeyer, J. Konys, 2001 .

Long-term corrosion of austenitic steels in flowing LBE at 400 °C and 10−7 mass% dissolved oxygen in comparison with 450 and 550 °C

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2016 .

Creep-to-rupture of 12Cr- and 14Cr-ODS steels in oxygen-controlled lead and air at 650 °C

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2014 .

Comparison of hot dip aluminised F82H-mod. steel after different subsequent heat treatments

O. Wedemeyer, H. Glasbrenner, O. Wedemeyer, 1998 .

Comparison of microstructure and formation of intermetallic phases on F82H-mod. and MANET II

O. Wedemeyer, H. Glasbrenner, Juergen Konys, 1998 .

A method for producing a protective layer on a martensitic steel, and use of the steel provided with the protective layer

O. Wedemeyer, H. Glasbrenner, K. Stein-Fechner, 1998 .

Investigations on the transformation behavior of the intermetallic phase (Fe, Cr)2Al5 formed on MANET II steel by aluminizing

O. Wedemeyer, Juergen Konys, K Stein-Fechner, 1997 .

Corrosion kinetics of Steel T91 in flowing oxygen-containing lead–bismuth eutectic at 450 °C

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2012 .

Creep-to-rupture of the steel P92 at 650 °C in oxygen-controlled stagnant lead in comparison to air

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2013 .

Oxidation of steel T91 in flowing lead–bismuth eutectic (LBE) at 550 °C

Jürgen Konys, Olaf Wedemeyer, C. Schroer, 2006 .

Gas/liquid oxygen-transfer to flowing lead alloys

Olaf Wedemeyer, Carsten Schroer, C. Schroer, 2011 .

Oxygen measurements in stagnant lead–bismuth eutectic using electrochemical sensors

H. Muscher, Olaf Wedemeyer, H. Muscher, 2004 .

Long-term service of austenitic steel 1.4571 as a container material for flowing lead–bismuth eutectic

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2011 .

Performance of 9% Cr steels in flowing lead-bismuth eutectic at 450 and 550 °C, and 10−6 mass% dissolved oxygen

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2014 .

Aspects of minimizing steel corrosion in liquid lead-alloys by addition of oxygen

Olaf Wedemeyer, Carsten Schroer, C. Schroer, 2011 .

Electrochemical Oxygen Sensors for Corrosion Control in Lead-Cooled Nuclear Reactors

C. Schroer, J. Konys, O. Wedemeyer, 2009 .

Corrosion behavior of EUROFER steel in flowing eutectic Pb–17Li alloy

Jürgen Konys, W. Krauss, Z. Voss, 2004 .