A. Skrypnik

发表

Selective leaching of nickel and chromium from Type 316 austenitic steel in oxygen-containing lead–bismuth eutectic (LBE)

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2014 .

Creep of 316L austenitic steel at 450-550°C in static lead-bismuth eutectic covered by argon-hydrogen gas

M. Yurechko, C. Schroer, J. Konys, 2021, Journal of Nuclear Materials.

Corrosion Interaction of 9%Cr Ferritic/Martensitic Steels at 450 and 550 °C With Flowing Pb–Bi Eutectic Containing 10−7 Mass % Dissolved Oxygen

C. Schroer, J. Konys, V. Tsisar, 2019, Journal of Nuclear Engineering and Radiation Science.

Corrosion in Iron and Steel T91 Caused by Flowing Lead–Bismuth Eutectic at 400 °C and 10−7 Mass% Dissolved Oxygen

C. Schroer, J. Konys, V. Tsisar, 2019, Journal of Nuclear Engineering and Radiation Science.

Effect of Structural State and Surface Finishing on Corrosion Behavior of 1.4970 Austenitic Steel at 400 and 500 °C in Flowing Pb-Bi Eutectic With Dissolved Oxygen

C. Schroer, J. Konys, V. Tsisar, 2018, Journal of Nuclear Engineering and Radiation Science.

Characterization of corrosion phenomena and kinetics on T91 ferritic/martensitic steel exposed at 450 and 550 °C to flowing Pb-Bi eutectic with 10−7 mass% dissolved oxygen

C. Schroer, J. Konys, V. Tsisar, 2017 .

Oxidation and dissolution of iron in flowing lead–bismuth eutectic at 450 °C

C. Schroer, J. Konys, O. Wedemeyer, 2012 .

Steel T91 subjected to static stress in lead-bismuth eutectic at 450–550 °C and low oxygen concentration

M. Yurechko, C. Schroer, J. Konys, 2018, Journal of Nuclear Materials.

Flow rate dependent corrosion behavior of Eurofer steel in Pb–15.7Li

W. Krauss, J. Konys, H. Steiner, 2011 .

CMS - The Compact Muon Solenoid

T. Aushev, Carlos Dias Maciel, Andrea Benaglia, 1996 .

Expression of interest to the Superconducting Super Collider Laboratory by the L* Collaboration

Joseph A. Paradiso, R. T. Primm, B. C. Chakoumakos, 1990 .

Corrosion behavior of austenitic steels 1.4970, 316L and 1.4571 in flowing LBE at 450 and 550 °C with 10-7 mass% dissolved oxygen

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2014 .

Silicon-containing ferritic/martensitic steel after exposure to oxygen-containing flowing lead–bismuth eutectic at 450 and 550 °C

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2016 .

Long-term corrosion of austenitic steels in flowing LBE at 400 °C and 10−7 mass% dissolved oxygen in comparison with 450 and 550 °C

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2016 .

Creep-to-rupture of 12Cr- and 14Cr-ODS steels in oxygen-controlled lead and air at 650 °C

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2014 .

Corrosion kinetics of Steel T91 in flowing oxygen-containing lead–bismuth eutectic at 450 °C

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2012 .

Creep-to-rupture of the steel P92 at 650 °C in oxygen-controlled stagnant lead in comparison to air

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2013 .

Physical start-up of the first stage of IREN facility

A. V. Belozerov, P. Sedyshev, O. Belikov, 2010 .

The LUE-200 accelerator at the IREN facility: Current status and development

A. Repkin, V. Shvetsov, V. Minashkin, 2014, Physics of Particles and Nuclei Letters.

Long-term service of austenitic steel 1.4571 as a container material for flowing lead–bismuth eutectic

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2011 .

The TUS Fesnel mirror production and optical parameters measurement

L. Tkachev, S. Porokhovoy, V. Grebenyuk, 2013, Physics of Particles and Nuclei Letters.

Performance of 9% Cr steels in flowing lead-bismuth eutectic at 450 and 550 °C, and 10−6 mass% dissolved oxygen

Jürgen Konys, Olaf Wedemeyer, Carsten Schroer, 2014 .