J. Chou

发表

Sol–Gel‐derived ZnO Coating with Nanopatterns Fabricated by Nanoimprinting

M. Hon, I. Leu, C. Kuan, 2008 .

Growth Behavior, Microstructure Characterization, and Field-Emission Property of 6-Fold Hierarchical Zn/ZnO Structures Prepared by Direct Annealing

M. Hon, I. Leu, C. Kuan, 2009 .

Self-organized Zn/ZnO core-shelled hierarchical structures prepared by aqueous chemical growth

M. Hon, I. Leu, C. Kuan, 2008 .

Growth characteristics of hierarchical ZnO structures prepared by one-step aqueous chemical growth

M. Hon, I. Leu, C. Kuan, 2012 .

Microstructure and bonding behavior on the interface of an induction-melted Ni-based alloy coating and AISI 4140 steel substrate

J. H. Chang, R. Hsieh, J. H. Chang, 2010 .

Microstructural and microhardness characteristics of induction melted nickel-based alloys

J. H. Chang, R. Hsieh, J. L. Lee, 2010 .

Corrosion behaviour of an alloy formed by inductive melting of a cobalt-based alloy and AISI 4140 steel

J. H. Chang, R. Hsieh, J. L. Lee, 2009 .

Corrosion behaviour of vacuum induction-melted Ni-based alloy in sulphuric acid

J. H. Chang, R. Hsieh, J. H. Chang, 2010 .

Microstructural study on oxygen permeated arc beads

Guoxin Chen, Kuan-Heng Liu, J. Chou, 2015 .

The nucleation of austenite in ferritic ductile cast iron

Jye-Long Lee, M. Hon, J. Chou, 1992 .

The austenite transformation in ferritic ductile cast iron

Jye-Long Lee, M. Hon, J. Chou, 1992 .

Affects of graphite morphology and matrix structure on mechanical properties of cast ions

Jye-Long Lee, M. Hon, J. Chou, 1990 .

Effect of dry sliding wear conditions on a vacuum induction melted Ni alloy

J. H. Chang, R. Hsieh, J. L. Lee, 2011 .

Wetting Characteristics on Micro/Nanostructured Zinc Oxide Coatings

M. Hon, I. Leu, C. Kuan, 2009 .

Formation and field emission property of single-crystalline Zn microtip arrays by anodization

M. Hon, I. Leu, C. Kuan, 2007 .

Effect of Gas Bottom Blowing Condition on Mixing Molten Iron and Slag inside Ironmaking Smelter

Shih-Hsien Liu, J. Chou, Chau-Jeng Su, 2009 .

Influence of fusing temperature on microstructure, wear and corrosion resistance of induction melted bimetal of Co-based alloy and AISI 4140 steel

R. Hsieh, J. L. Lee, J. Chou, 2009 .

Effects of process conditions on mixing between molten iron and slag in smelting reduction vessel via water model study

W. Hwang, S. H. Liu, H. S. Wang, 2003 .

Effect of Gas Bottom Blowing Conditions on Fluid Flow Phenomena and Mixing Time of Molten Iron inside an Ironmaking Smelter

Shih-Hsien Liu, J. Chou, Chau-Jeng Su, 2010 .

Effect of Gas Bottom Blowing Conditions on Mixing of Molten Iron inside an Ironmaking Smelter

Shih-Hsien Liu, J. Chou, Chau-Jeng Su, 2010 .

Sixfold self-assembled hierarchical structures synthesized by direct annealing of Zn microtips

M. Hon, I. Leu, C. Kuan, 2008 .

Microstructural Study on Molten Marks of Fire-Causing Copper Wires

Guoxin Chen, Kuan-Heng Liu, J. Chou, 2015, Materials.