D. Manova

W. Assmann, B. Rauschenbach, P. Huber, 2000, 2000 International Conference on Ion Implantation Technology Proceedings. Ion Implantation Technology - 2000 (Cat. No.00EX432).

Depth-resolved study of hydrogen-free amorphous carbon films on stainless steel

M. Fazio, D. Hirsch, S. Mändl, 2017 .

Investigation of nucleation and phase formation of photocatalytically active TiO2 films by MePBIID

D. Hirsch, S. Mändl, J. Gerlach, 2009 .

Effect of plasma immersion ion implantation and deposition on high temperature oxidation of titanium alloy IMI 834-aluminizing

S. Mändl, B. Rauschenbach, J. Gerlach, 2006 .

Comparison of ZrN and TiN formed by plasma based ion implantation & deposition

W. Assmann, D. Hirsch, S. Mändl, 2008 .

Influence of nitrogen implantation on the high temperature oxidation of titanium-base alloys

S. Mändl, B. Rauschenbach, J. Gerlach, 2006 .

Photochemical preparation of aluminium oxide layers via vacuum ultraviolet irradiation of a polymeric hexanoato aluminium complex

C. Bundesmann, S. Naumov, L. Prager, 2013 .

Phase formation in Ti after high fluence/high temperature nitrogen implantation

W. Assmann, H. Neumann, S. Mändl, 2006 .

Deposition and properties of novel microcrystalline Mg alloy coatings

M. Störmer, W. Dietzel, S. Mändl, 2007 .

Investigation of d.c.-reactive magnetron-sputtered AlN thin films by electron microprobe analysis, X-ray photoelectron spectroscopy and polarised infra-red reflection

D. Karpuzov, W. Fukarek, D. Manova, 1998 .

Different Underlying Corrosion Mechanism for Mg Bulk Alloys and Mg Thin Films

N. Scharnagl, M. Störmer, S. Mändl, 2009 .

Formation of TiN, TiC and TiCN by metal plasma immersion ion implantation and deposition

S. Mändl, B. Rauschenbach, P. Huber, 2003 .

Study of nitrogen implantation in Ti surface using plasma immersion ion implantation & deposition technique as biocompatible substrate for artificial membranes.

M. Favre, S. Mändl, H. Bhuyan, 2020, Materials science & engineering. C, Materials for biological applications.

Optical and dielectric properties of dc magnetron sputtered AlN thin films correlated with deposition conditions

E. Valcheva, D. Manova, V. Dimitrova, 1999 .

Dependence of ion beam induced nitrogen diffusion in aluminum on oxygen impurities

S. Mändl, B. Rauschenbach, J. Gerlach, 2002 .

Aluminium nitride thin films deposited by DC reactive magnetron sputtering fn2 fn2 Paper presented a

D. Dechev, N. Ivanov, T. Paskova, 1998 .

Microstructure and corrosion behavior of AISI 316L duplex treated by means of ion nitriding and plasma based ion implantation and deposition

M. Fazio, S. Brühl, S. Simison, 2013 .

Lateral texture evolution during formation of TiN by MePIIID

S. Mändl, B. Rauschenbach, P. Huber, 2002 .

Lateral homogeneity variation in metal plasma immersion ion implantation and deposition

S. Mändl, B. Rauschenbach, P. Huber, 2002 .

Optical characterization of TiN produced by metal-plasma immersion ion implantation

S. Mändl, B. Rauschenbach, P. Huber, 2001 .

Balancing incident heat and ion flow for process optimization in plasma based ion implantation

S. Mändl, B. Rauschenbach, D. Manova, 2002 .

Microstructure of Ti thin films formed by energetic physical vapour deposition processes

D. Hirsch, H. Neumann, S. Mändl, 2009 .

Correlation between PIII nitriding parameters and corrosion behaviour of austenitic stainless steels

M. Pham, H. Neumann, S. Mändl, 2005 .

Corrosion properties of stainless steel 316 L after energetic nitrogen insertion

H. Neumann, S. Simison, S. Mändl, 2012 .

Nitriding of austenitic stainless steel by pulsed low energy ion implantation

F. Scholze, H. Neumann, S. Mändl, 2010 .

Corrosion resistance of AISI 316L stainless steel nitrided by three different plasma assisted techniques.

S. Brühl, S. Simison, S. Mändl, 2014 .

Heat balance during plasma immersion ion implantation

S. Mändl, B. Rauschenbach, D. Manova, 2001 .

In situ XRD measurements to explore phase formation in the near surface region

S. Mändl, D. Manova, 2019 .

Comparability and accuracy of nitrogen depth profiling in nitrided austenitic stainless steel

C. Díaz, S. Mändl, G. Abrasonis, 2015 .

Analysis of in situ XRD measurements for low energy ion beam nitriding of austenitic stainless steel

H. Neumann, S. Mändl, B. Rauschenbach, 2014 .

Influence of temperature on layer growth as measured by in situ XRD observation of nitriding of austenitic stainless steel

H. Neumann, S. Mändl, B. Rauschenbach, 2013 .

Interpretation of Glancing Angle and Bragg–Brentano XRD Measurements for CoCr Alloy and Austenitic Stainless Steel After PIII Nitriding

S. Mändl, J. Gerlach, S. Mandl, 2011, IEEE Transactions on Plasma Science.

Wear reduction in AISI 630 martensitic stainless steel after energetic nitrogen ion implantation

D. Hirsch, H. Neumann, S. Mändl, 2005 .

Three-dimensional effects for two-dimensional samples in plasma immersion ion implantation

H. Neumann, S. Mändl, B. Rauschenbach, 2004 .

Influence of annealing conditions on ion nitriding of martensitic stainless steel

H. Neumann, S. Mändl, B. Rauschenbach, 2006 .

Variable lattice expansion in martensitic stainless steel after nitrogen ion implantation

H. Neumann, B. Stritzker, S. Mändl, 2006 .

Wear behaviour of martensitic stainless steel after PIII surface treatment

H. Neumann, S. Mändl, B. Rauschenbach, 2005 .

Comparison of Hardness Enhancement and Wear Mechanisms in Low Temperature Nitrided Austenitic and Martensitic Stainless Steel

D. Hirsch, H. Neumann, S. Mändl, 2004 .

Initial phase formation during nitriding of austenitic stainless steel

S. Mändl, D. Manova, 2023, Surface and Coatings Technology.

Sputter investigation of ion thrusters grid materials

M. Tartz, Horst Neumann, Hans Leiter, 2005 .

CrN precipitation and elemental segregation during the decay of expanded austenite

A. Lotnyk, H. Neumann, S. Mändl, 2016 .

In situ x-ray diffraction investigations during low energy ion nitriding of austenitic stainless steel grade 1.4571

D. Hirsch, H. Neumann, S. Mändl, 2014 .

In situ investigation of phase formation during low energy ion nitriding of Ni80Cr20 alloy

D. Hirsch, H. Neumann, S. Mändl, 2014 .

Intermediate stages of CrN precipitation during PIII nitriding of austenitic stainless steel

D. Hirsch, S. Mändl, D. Manova, 2014 .

Integration of a broad beam ion source with a high-temperature x-ray diffraction vacuum chamber.

H. Neumann, S. Mändl, B. Rauschenbach, 2012, The Review of scientific instruments.

Modification of metals by plasma immersion ion implantation

S. Mändl, D. Manova, 2019, Surface and Coatings Technology.

Evidence of secondary electron emission during PIII pulses as measured by calorimetric probe

S. Mändl, H. Kersten, F. Haase, 2016 .

Simulated plasma immersion ion implantation processing of thin wires

T. Wirtz, D. Duday, S. Mändl, 2010 .

Incident ion fluence gradients on the front and backside of flat samples

S. Mändl, B. Rauschenbach, D. Manova, 2007 .

Wear behaviour of NiTi shape memory alloy after oxygen-PIII treatment

S. Mändl, B. Rauschenbach, D. Manova, 2006 .

Absolute dose calibration in PIII

F. Scholze, H. Neumann, S. Mändl, 2004 .

High temperature nitrogen plasma immersion ion implantation into molybdenum

Walter Assmann, Bernd Rauschenbach, Horst Neumann, 2004 .

Evolution of surface morphology during ion nitriding of aluminium

S. Mändl, B. Rauschenbach, D. Manova, 2004 .

Aluminum diffusion and nitrogen sputter yield for nitrogen plasma immersion ion implantation into aluminum

B. Stritzker, S. Mändl, B. Rauschenbach, 2003 .

Orientation dependent sputter yield of aluminium

M. Schreck, B. Stritzker, S. Mändl, 2002 .

Dynamic measurements of optical emission during plasma immersion ion implantation

S. Mändl, D. Manova, 2019, Surface and Coatings Technology.

Highly localized ion focusing effects in PBIID

S. Mändl, Frank Haberkorn, D. Manova, 2008 .

Surface modification of aluminium by plasma immersion ion implantation

S. Mändl, B. Rauschenbach, P. Huber, 2000 .

Reactively DC magnetron sputtered thin AlN films studied by X-ray photoelectron spectroscopy and polarised infrared reflection

D. Karpuzov, D. Manova, V. Dimitrova, 1999 .

Effects of titanium and aluminum incorporations on the structure of boron nitride thin films

Xi Wang, S. Oswald, W. Möller, 1999 .

Thin Film Deposition Using Energetic Ions

S. Mändl, J. Gerlach, Jürgen W. Gerlach, 2010, Materials.

Nitriding of Ti substrate using energetic ions from plasma focus device

H. Chuaqui, M. Favre, E. Wyndham, 2012 .

Efficiency of a Venetian blind filter in PBIID

S. Mändl, D. Manova, S. Schirmer, 2008 .

Nitrogen incorporation during PVD deposition of TiO2:N thin films

S. Mändl, U. Decker, L. F. Arias, 2017 .

Homogeneity of metal plasma immersion ion implantation and deposition

S. Mändl, B. Rauschenbach, P. Huber, 2002 .

Oxygen behaviour during PIII-nitriding of aluminium

S. Mändl, B. Rauschenbach, D. Manova, 2001 .

Interplay of surface adsorption and preferential sputtering in metal plasma immersion ion implantation and deposition

S. Mändl, B. Rauschenbach, D. Manova, 2003 .

Influence of ion energy on titanium oxide formation by vacuum arc deposition and implantation

S. Mändl, B. Rauschenbach, G. Thorwarth, 2001 .

Dynamic determination of secondary electron emission using a calorimetric probe in a plasma immersion ion implantation experiment

D. Hirsch, S. Mändl, H. Kersten, 2018 .

Evolution of local texture and grain morphology in metal plasma immersion ion implantation & deposition of TiN

B. Stritzker, S. Mändl, B. Rauschenbach, 2004 .

Influence of ion energy on morphology and corrosion properties of Mg alloys formed by energetic PVD processes

M. Störmer, W. Dietzel, S. Mändl, 2007 .

Interface properties of TiO2 on Si formed by simultaneous implantation and deposition of titanium and oxygen ions

B. Stritzker, S. Mändl, B. Rauschenbach, 2001 .

Transparent AlN layers formed by metal plasma immersion ion implantation and deposition

S. Mändl, B. Rauschenbach, D. Manova, 2004 .

Study of reactive DC magnetron sputtering deposition of AlN thin films

D. Dechev, D. Manova, V. Dimitrova, 1998 .

Comparison of Nitriding Behavior for Austenitic Stainless Steel 316Ti and Super Austenitic Stainless Steel 904L

D. Manova, Stephan Mändl, 2024, Metals.

Nitrogen isotope marker experiments in austenitic stainless steel for identification of trapping/detrapping processes at different temperatures

S. Mändl, J. Gerlach, D. Manova, 2023, Surface and Coatings Technology.