J. Wood

发表

Metallurgy and Technological Properties of Titanium and Titanium Alloys

H. Freese, M. Volas, J. Wood, 2001 .

The apparent density of sheets made from pulp blends

A. Karnis, J. Görres, A. Karnis, 1996 .

Convective fluid flow and diagenetic patterns in domed sheets

S. Rosenblat, T. Hewett, S. H. Davis, 1985 .

Thermomechanical processing and heat treatment of Ti–6Al–2Sn–2Zr–2Cr–2Mo–Si for structural applications

P. Russo, J. Wood, M. Welter, 1998 .

Fluid convection and mass transfer in porous sandstones—a theoretical model

T. Hewett, J. Wood, 1982 .

Reservoir Diagenesis and Convective Fluid Flow: Part 1. Concepts and Principles

T. Hewett, J. Wood, 1984 .

Using carbon nanotubes to detect polymer transitions

H. Daniel Wagner, H. Wagner, Q. Zhao, 2001 .

Producing Ti-6Al-4V plate from single-melt EBCHM ingot

J. Wood, 2002 .

Mechanical pulp fines and sheet structure

A. Karnis, J. Görres, A. Karnis, 1996 .

Location of fines in mechanical pulp handsheets using scanning electron microscopy

J. R. Wood, G. D. Silveira, G. De Silveira, 1996 .

Transcrystallinity in polycarbonate-carbon fibre microcomposites: The key to the mechanical role of the interphase

H. Wagner, G. Marom, J. Wood, 1995 .

Void control for polymer-matrix composites (2): Experimental evaluation of a diffusion model for the growth and collapse of gas bubbles

M. G. Bader, J. Wood, 1994 .

Void control for polymer-matrix composites (1): Theoretical and experimental methods for determining the growth and collapse of gas bubbles

M. G. Bader, J. Wood, 1994 .

Evidence for episodic cementation and diagenetic recording of seismic pumping events, North Coles Levee, California, U.S.A.

J. Boles, J. Wood, 1991 .

Determining the interfacial shear strength in the presence of transcrystallinity in composites by the ‘single-fibre microcomposite compressive fragmentation test’

G. Marom, J. Wood, 1997 .

The compressive fragmentation phenomenon: using microcomposites to evaluate thermal stresses, single fibre compressive strengths, Weibull parameters and interfacial shear strengths

H. Wagner, G. Marom, J. Wood, 1996, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

Thermal shrinkage induced compressive fragmentation in composite materials

G. Marom, J. Wood, Y. Saado, 1997 .

Orientation of carbon nanotubes in polymers and its detection by Raman spectroscopy

H. Wagner, Q. Zhao, J. Wood, 2001 .

Stress fields around defects and fibers in a polymer using carbon nanotubes as sensors

H. Daniel Wagner, H. Wagner, Q. Zhao, 2001 .

Carbon nanotubes : from molecular to macroscopic sensors

A. D. Prins, David J. Dunstan, Ton Peijs, 2000 .

Single-wall carbon nanotubes as molecular pressure sensors

H. Daniel Wagner, H. Wagner, Jonathan R. Wood, 2000 .

Mechanical Response of Carbon Nanotubes under Molecular and Macroscopic Pressures

A. D. Prins, David J. Dunstan, H. Wagner, 1999 .

Poisson's ratio as a damage parameter in the static tensile loading of simple crossply laminates

P. Smith, Paul Smith, Jonathan R. Wood, 1990 .

A direct reading capacitance plethysmograph

C. Hyman, Chester Hyman, Jonathan R. Wood, 2007, Medical and biological engineering.

Measurement of thermal strains during compressive fragmentation in single-fibre composites by Raman spectroscopy

R. Young, G. Marom, J. Wood, 1995 .

A Model for Compressive Fragmentation

H. Wagner, G. Marom, J. Wood, 1994 .

Forced Fluid flow and Diagenesis in Porous Reservoirs Controls on the Spatial Distribution

T. Hewett, J. Wood, 1986 .

Determination of specific surface area of mechanical pulp fines from turbidity measurements

A. Karnis, A. Karnis, J. R. Wood, 1996 .

Calculation of mass transfer coefficients for dolomitization models

J. Wood, 1987 .

Titanium and its Alloys in Biomedical Engineering

M. Textor, H. Freese, M. Volas, 2001 .