Giuseppe Bucca

发表

Numerical and Hardware-In-the-Loop Tools for the Design of Very High Speed Pantograph-Catenary Systems

Stefano Bruni, Giuseppe Bucca, Andrea Collina, 2012 .

A mechanical filter for FBG accelerometers

Giuseppe Bucca, Andrea Collina, Marco Francesco Bocciolone, 2014, Other Conferences.

Analysis of electrical interferences related to the current collection quality in pantograph–catenary interaction

Giuseppe Bucca, Andrea Collina, R. Manigrasso, 2011 .

Design and development of an active suspension system for T-2006 Pantograph

Ferruccio Resta, Giuseppe Bucca, Andrea Collina, 2008 .

ELECTROMECHANICAL INTERACTION BETWEEN CARBON BASED PANTOGRAPH STRIP AND COPPER CONTACT WIRE: A HEURISTIC WEAR MODEL

Giuseppe Bucca, Andrea Collina, A. Collina, 2015 .

A numerical model for predicting tramway rail damaging [Un modello numerico per la previsione del danneggiamento di rotaie tranviarie]

Francesco Braghin, Giuseppe Bucca, Stefano Beretta, 2007 .

PANTOGRAPH-CATENARY DYNAMIC INTERACTION IN THE MEDIUM-HIGH FREQUENCY RANGE

Stefano Bruni, Giuseppe Bucca, Andrea Collina, 2004 .

Pantograph–catenary interaction: recent achievements and future research challenges

Stefano Bruni, Giuseppe Bucca, Andrea Collina, 2018 .

An experimental real-time emulator for railway drive controllers testing

Giuseppe Bucca, R. Manigrasso, Marco Mauri, 2002 .

Optical sensors for the analysis of pantograph-catenary interaction

Giuseppe Bucca, Andrea Collina, Lorenzo Comolli, 2016 .

First results from in line strain measurements with FBG sensors on the pantograph collector of underground trains

Giuseppe Bucca, Andrea Collina, Lorenzo Comolli, 2010, Photonics Europe.

An approach to monitor railway pantograph-catenary interaction with fiber optic sensors

Giuseppe Bucca, Andrea Collina, Marco Francesco Bocciolone, 2010, European Workshop on Optical Fibre Sensors.

A smart-hose for concrete displacing booms

Ferruccio Resta, Francesco Ripamonti, Giuseppe Bucca, 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Adoption of different pantographs’ preloads to improve multiple collection and speed up existing lines

Giuseppe Bucca, Alan Facchinetti, Lars Drugge, 2012 .

Electronic differential for tramcar bogies: system development and performance evaluation by means of numerical simulation

Giuseppe Bucca, Alan Facchinetti, Roberto Corradi, 2014 .

A mechatronic device for the rehabilitation of ankle motor function.

Stefano Bruni, Giuseppe Bucca, Franco Molteni, 2009, Journal of biomechanical engineering.

On the use of a hardware in the loop set-up for pantograph dynamics evaluation

Ferruccio Resta, Giuseppe Bucca, Andrea Collina, 2008 .

An application of FBG accelerometers for monitoring pantographs of underground trains

Giuseppe Bucca, Andrea Collina, Marco Francesco Bocciolone, 2010, European Workshop on Optical Fibre Sensors.

Pantograph-catenary monitoring by means of fibre Bragg grating sensors: Results from tests in an underground line

Giuseppe Bucca, Andrea Collina, Marco Francesco Bocciolone, 2013 .

Comparison of optical and electrical measurements of the pantograph-catenary contact force

Giuseppe Bucca, Andrea Collina, Marco Francesco Bocciolone, 2010, European Workshop on Optical Fibre Sensors.

Extending pantograph dynamics assessment in laboratory to the evaluation of dynamic performances in real operating environment

Ferruccio Resta, Giuseppe Bucca, Andrea Collina, 2009 .

Application of new optical load cells for in-line measurement of pantograph-catenary contact force

Giuseppe Bucca, Andrea Collina, Marco Francesco Bocciolone, 2013, Other Conferences.

A Mechatronic Device for the Rehabilitation of Ankle Motion

Stefano Bruni, Giuseppe Bucca, Franco Molteni, 2008, BIODEVICES.

Multibody simulation of tramcar dynamics for the analysis of track degradation

Giuseppe Bucca, Alan Facchinetti, Laura Mazzola, 2007 .

A diagnostic system for overhead lines and pantographs: results from first installation on commuter and high speed commercial trains

Giuseppe Bucca, Andrea Collina, Marco Carnevale, 2016 .

Assessment of current collection quality of ETR1000-V300 Zefiro pantograph: an innovative measurement set-up and test results

Giuseppe Bucca, Alan Facchinetti, Lorenzo Comolli, 2016 .

A numerical 3D model to study ratcheting damage of a tramcar line

Giuseppe Bucca, Stefano Beretta, Stefano Foletti, 2010 .

Assembly Task Learning and Optimization through Human’s Demonstration and Machine Learning

Giuseppe Bucca, Dario Piga, Loris Roveda, 2020, 2020 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

Structural integrity analysis of a tram-way: load spectra and material damage

Francesco Braghin, Giuseppe Bucca, Stefano Beretta, 2003 .

Interferometric fiber sensor for high-speed railway pantograph monitoring

Pierpaolo Boffi, Giuseppe Bucca, Andrea Collina, 2008 .

Enhancing Object Detection Performance Through Sensor Pose Definition with Bayesian Optimization

Giuseppe Bucca, Dario Piga, Loris Roveda, 2021, 2021 IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT).

Sensorless Optimal Switching Impact/Force Controller

Giuseppe Bucca, Dario Piga, Loris Roveda, 2021, IEEE Access.

Robot End-Effector Mounted Camera Pose Optimization in Object Detection-Based Tasks

Giuseppe Bucca, Dario Piga, Loris Roveda, 2021, Journal of Intelligent & Robotic Systems.

Experimental Analysis of the Influence of the Electrical Arc on the Wear Rate of Contact Strip and Contact Wire in a.c. System

Giuseppe Bucca, Andrea Collina, Ezio Tanzi, 2017 .

An optical fibre set-up to monitor contact force in pantograph-catenary system

Ferruccio Resta, Giuseppe Bucca, Andrea Collina, 2007 .

A Test Rig for the Comparative Evaluation on the Performance of Collector Strips

Giuseppe Bucca, Andrea Collina, Marco Francesco Bocciolone, 2004 .

Fiber Sensor for Collector Strain Monitoring in the Pantograph-Catenary Interaction

Pierpaolo Boffi, Mario Martinelli, Giuseppe Bucca, 2006 .