I. Konstantinov

发表

Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing

M. Motkov, D. Voroshilov, S. Sidelnikov, 2021, The International Journal of Advanced Manufacturing Technology.

Research of Technology For Production Deformed Semi-Finished Products From Chip Waste of Aluminum Alloys And Study Properties of The Obtained Products

Y. Loginov, E. Ivanov, D. Voroshilov, 2021 .

Numerical analysis of the non-stationary thermal state of the tool in the combined casting and extrusion of aluminum alloy

Yu. V. Gorokhov, A. Potapenko, D. Voroshilov, 2021, The International Journal of Advanced Manufacturing Technology.

Numerical Analysis of the Non-Stationary Thermal State of the Tool in the Combined Casting and Extrusion of Non-Ferrous Metals

Yu. V. Gorokhov, A. Potapenko, D. Voroshilov, 2021 .

Modeling and research of the deformation treatment process of 585 gold fineness alloys for obtaining wire for jewelry purpose

D. Voroshilov, S. Sidelnikov, I. Konstantinov, 2021, The International Journal of Advanced Manufacturing Technology.

Investigation structure and properties of wire from the alloy of AL-REM system obtained with the application of casting in the electromagnetic mold, combined rolling-extruding, and drawing

M. Motkov, D. Voroshilov, S. Sidelnikov, 2021, The International Journal of Advanced Manufacturing Technology.

Computer Simulation of the Technology for Producing a Stamped Billet for the Piston of an Internal Combustion Engine of an Unmanned Aerial Vehicle

Yu. V. Gorokhov, D. Voroshilov, S. Sidelnikov, 2021, Russian Journal of Non-Ferrous Metals.

Use of computer simulation for modernization technology of aluminum alloys hot die forging

V. I. Belokopytov, D. Voroshilov, S. Sidelnikov, 2020, The International Journal of Advanced Manufacturing Technology.

Use of computer simulation for modernization technology of aluminum alloys hot die forging

I. L. Konstantinov, Sergey B. Sidelnikov, Sergey V. Belyaev, 2020 .

Physical Modeling of Semi-continuous Casting for Developing an Industrial Technology of Producing Ingots From New Deformable Aluminum Alloys

D. Voroshilov, I. Konstantinov, Y. Mansurov, 2021 .

Investigation of rolling modes, structure, and properties of aluminum-magnesium alloy plates with a reduced scandium content

D. Voroshilov, S. Sidelnikov, I. Konstantinov, 2022, The International Journal of Advanced Manufacturing Technology.

Modeling of casting technology of large-sized ingots from deformable aluminum alloys

A. A. Iliin, D. Voroshilov, S. Sidelnikov, 2021, The International Journal of Advanced Manufacturing Technology.

Investigation of cold rolling modes of 1580 alloy by the method of computer simulation

D. Voroshilov, S. Sidelnikov, I. Konstantinov, 2021, The International Journal of Advanced Manufacturing Technology.

Investigation of the structure and properties of cold-rolled strips from experimental alloy 1580 with a reduced scandium content

V. Frolov, D. Voroshilov, S. Sidelnikov, 2020, The International Journal of Advanced Manufacturing Technology.

Study of strength properties of semi-finished products from economically alloyed high-strength aluminium-scandium alloys for application in automobile transport and shipbuilding

V. Frolov, D. Voroshilov, S. Sidelnikov, 2018 .

3D modelling of the large-capacity ingots of an Al – Mg system aluminium alloy doped with scandium rolling process

S. Sidelnikov, I. Konstantinov, I. Dovzhenko, 2017 .

Study the influence of scandium content and annealing regimes on the properties of alloys 1580 and 1581

S. Sidelnikov, I. Konstantinov, Y. Mansurov, 2022, International Journal of Lightweight Materials and Manufacture.

Influence of Rolling and Annealing Modes on Properties of Sheet Semifinished Products Made of Wrought Aluminum Alloy 1580

S. Sidelnikov, I. Konstantinov, V. Baranov, 2020, Russian Journal of Non-Ferrous Metals.

Computer simulation, analysis of force and temperature-speed parameters of the process of combined machining of Al-Mg-Sc alloys

V. Frolov, D. Voroshilov, S. Sidelnikov, 2019, IOP Conference Series: Materials Science and Engineering.

Study on the influence of heat treatment modes on mechanical and corrosion properties of rolled sheet products from a new aluminum alloy, economically alloyed with scandium

V. Frolov, D. Voroshilov, S. Sidelnikov, 2019, Vestnik of Nosov Magnitogorsk State Technical University.

Investigation the structure in cast and deformed states of aluminum alloy, economically alloyed with scandium and zirconium

D. Voroshilov, I. Konstantinov, V. Baranov, 2021, The International Journal of Advanced Manufacturing Technology.

Simulation of die forging of an AK6 aluminum alloy forged piece

I. Konstantinov, S. B. Sidel’nikov, I. Y. Gubanov, 2015, Russian Journal of Non-Ferrous Metals = Izvestiya VUZ. Tsvetnaya Metallurgiya.

Computer simulation of the production process for isothermal forging of profiled panels made of aluminum alloys

Yu. V. Gorokhov, I. Konstantinov, I. Yu. Gubanov, 2013, Russian Journal of Non-Ferrous Metals.

Investigation of the structure and properties of cold-rolled strips from experimental alloy 1580 with a reduced scandium content

V. Frolov, D. Voroshilov, S. Sidelnikov, 2020, The International Journal of Advanced Manufacturing Technology.

Simulation of combined rolling-extrusion process for round section billets in closed box caliber

M. Motkov, D. Voroshilov, S. Sidelnikov, 2023, The International Journal of Advanced Manufacturing Technology.

Obtaining Al-Zr-Hf wire using electromagnetic casting, combined rolling-extrusion, and drawing

I. S. Gudkov, M. Motkov, D. Voroshilov, 2022, International Journal of Lightweight Materials and Manufacture.

The research of the cold rolling modes for plates of aluminum alloy sparingly doped with scandium

S. Sidelnikov, I. Konstantinov, V. Baranov, 2019 .

An approach to calculating the energy-power parameters of metal pressing process by the conform method

A. A. Kosovich, I. Konstantinov, Y. Mansurov, 2023, The International Journal of Advanced Manufacturing Technology.

Investigation of Industrial 1580 Alloy Sheet Weldability by Friction Stir Welding

I. Konstantinov, P. Yuryev, A. O. Ivanova, 2022, Metallurgist.

Study of the Influence of Conditions of Combined Casting and Rolling-Extruding and Two-Stage Annealing on the Structure and Properties of Semi-Finished Electrical Products from an Al–Zr System Alloy

D. Voroshilov, S. Sidelnikov, V. Bespalov, 2019, Key Engineering Materials.