H. J. Chang

发表

Unusual glass-forming ability induced by changes in the local atomic structure in Ti-based bulk metallic glass

Pil-Ryung Cha, D. Kim, Yu‐Chan Kim, 2007 .

Tuning correlative atomic scale fluctuation and related properties in Ni–Nb–Zr metallic glasses

D. Kim, Hyunseok Oh, Soo yeon Kim, 2019, Acta Materialia.

H-P adaptive methods for finite element analysis of aerothermal loads in high-speed flows

J. Oden, W. Tworzydlo, J. Bass, 1993 .

Experimental and numerical study of the thermo-mechanical behavior of Al bi-crystal in tension using full field measurements and micromechanical modeling

L. Tabourot, A. Saai, H. Louche, 2010 .

Mg-rich Mg–Ni–Gd ternary bulk metallic glasses with high compressive specific strength and ductility

D. Kim, E. Park, H. J. Chang, 2007 .

Prediction of forming limit in hydro-mechanical deep drawing of steel sheets using ductile fracture criterion

Kyu Hwan Oh, Hyung-Jun Chang, Heung Nam Han, 2006 .

Hydrogenation of Ti50Zr25Co25 amorphous ribbons and its effect on their structural and mechanical properties

D. Kim, E. Fleury, D. Y. Lee, 2008 .

Interfacial electrical conductivity controlled crystallization of amorphous LaAlO 3 under electron-beam irradiation

D. Kim, S. Baek, G. Lee, 2016, Microscopy and Microanalysis.

Effects of temperature on the cyclic deformation behaviour and microstructural changes of 12Cr-1MoVW martensitic stainless steel

C. Tsai, J. Kai, H. J. Chang, 1994 .

Effects of temperature on the low cycle fatigue and microstructures of HT-9 ferritic steel

J. Kai, H. J. Chang, 1992 .

Formation of metastable phases and nanocomposite structures in rapidly solidified Al–Fe alloys

S. K. Pabi, B. Murty, D. Kim, 2011 .

Microstructure modification and quasicrystalline phase formation in Al–Mn–Si–Be cast alloys

E. Fleury, D. Kim, G. Song, 2004 .

Application of spinodal decomposition to produce metallic glass matrix composite with simultaneous improvement of strength and plasticity

Y. C. Kim, D. Kim, E. Fleury, 2009 .

Synthesis of icosahedral phase during cold working and annealing of elemental multilayers in the Al–Cu–Fe ternary system

S. Yi, D. Kim, Junsoo Park, 2004 .

Isothermal aging characteristics of Sn-Pb micro solder bumps

K. S. Kim, K. S. Kim, C. H. Yu, 2003, Microelectron. Reliab..

Role of minor addition of metallic alloying elements in formation and properties of Cu–Ti-rich bulk metallic glasses

D. Kim, E. Park, H. J. Chang, 2008 .

The effect of Zr addition in glass forming ability of Ni–Nb alloy system

D. Kim, E. Park, M. Kim, 2007 .

Observation of artifact-free amorphous structure in Cu–Zr-based alloy using transmission electron microscopy

D. Kim, Yu‐Chan Kim, E. Park, 2005 .

Mechanical behaviors of partially devitrified ti-based bulk metallic glass

J. S. Park, J. M. Park, J. S. Park, 2005 .

Improvement of plasticity by tailoring combination of constituent elements in Ti-rich Ti-Zr-Be-Cu-Ni bulk metallic glasses

Jong-Jin Lee, D. Kim, D. Kim, 2007 .

The evolution of structural and electronic properties during the glass transition process of Al–Ni–Nd alloy

L. Chen, H. J. Chang, X. Zhu, 2013 .

Formation of nano-porous GeOx by de-alloying of an Al–Ge–Mn amorphous alloy

K. B. Kim, J. Eckert, Y. Yokoyama, 2015 .

First principle molecular dynamic simulation of the rapid solidification process of Ca50Mg20Cu30 alloy

L. Chen, H. J. Chang, X. Zhu, 2012 .

Precipitation of a two-dimensional aperiodic approximant phase in Al-rich Al–Mn–Be alloy

D. Kim, E. Fleury, Y. H. Lee, 2004 .

Network structure composite in phase separating Gd30Zr25Al25(Co/Cu)20 metallic glassy alloys

D. Kim, E. Park, W. Yook, 2010 .

Probing structural changes during ductile fracture in metallic glasses via in situ straining inside a MeV transmission electron microscope

D. Kim, Young-Min Kim, E. Park, 2018, Intermetallics.