M. Ryan

发表

Automated Bone Screw Tightening to Adaptive Levels of Stripping Torque

K. Reynolds, T. Hearn, T. Cleek, 2016, Journal of orthopaedic trauma.

“Turn-of-the-Nut” Method Is Not Appropriate for Use in Cancellous Bone

K. Reynolds, J. Costi, Aaron A. Mohtar, 2015, Journal of orthopaedic trauma.

Micro-CT imaging of surgical screw tightening in human trabecular bone

K. Reynolds, J. Costi, E. Perilli, 2015 .

Heterogeneous Strain Distribution in the Subchondral Bone of Human Osteoarthritic Femoral Heads, Measured with Digital Volume Correlation

E. Dall’Ara, J. Wilkinson, S. Oliviero, 2020, Materials.

Flow rate accuracy of ambulatory elastomeric and electronic infusion pumps when exposed to height and back pressures experienced during home infusion therapy

Jodie G Hobbs, Andrew J Sluggett, K. Reynolds, 2019, Expert Review of Medical Devices.

A new approach to comprehensively evaluate the morphological properties of the human femoral head: example of application to osteoarthritic joint

E. Dall’Ara, J. Wilkinson, J. Rochester, 2020, Scientific Reports.

Time-elapsed screw insertion with microCT imaging.

K. Reynolds, M. Ryan, Aaron A. Mohtar, 2016, Journal of biomechanics.

Does cancellous screw insertion torque depend on bone mineral density and/or microarchitecture?

Egon Perilli, John J Costi, Karen J Reynolds, 2014, Journal of biomechanics.

A new approach to comprehensively evaluate the morphological properties of the human femoral head: example of application to osteoarthritic joint

E. Dall’Ara, J. Wilkinson, J. Rochester, 2020, Scientific Reports.

Effect of size and location of simulated lytic lesions on the structural properties of human vertebral bodies, a micro-finite element study

M. Viceconti, E. Dall’Ara, J. Rochester, 2020, Bone reports.

Protocol for a randomised crossover trial to evaluate patient and nurse satisfaction with electronic and elastomeric portable infusion pumps for the continuous administration of antibiotic therapy in the home: the Comparing Home Infusion Devices (CHID) study

Jodie G Hobbs, Andrew J Sluggett, K. Reynolds, 2017, BMJ Open.

Pullout strength of cancellous screws in human femoral heads depends on applied insertion torque, trabecular bone microarchitecture and areal bone mineral density.

K. Reynolds, J. Costi, E. Perilli, 2014, Journal of the mechanical behavior of biomedical materials.

Material Mapping of QCT-Derived Scapular Models: A Comparison with Micro-CT Loaded Specimens Using Digital Volume Correlation

E. Dall’Ara, M. Faieghi, L. Ferreira, 2019, Annals of Biomedical Engineering.

Performance of QCT-Derived scapula finite element models in predicting local displacements using digital volume correlation.

E. Dall’Ara, L. Ferreira, N. Knowles, 2019, Journal of the mechanical behavior of biomedical materials.

Full-field comparisons between strains predicted by QCT-derived finite element models of the scapula and experimental strains measured by digital volume correlation.

E. Dall’Ara, L. Ferreira, N. Knowles, 2020, Journal of biomechanics.

Validity of using a linear micro-finite element model to predict trabecular bone apparent mechanical properties: Comparison with a non-linear model and experimental data

K. Reynolds, J. Costi, N. Fazzalari, 2009 .