Han Zhang

发表

Enhanced superplasticity in an Al-alloyed multicomponent Mn–Si–Cr–C steel

C. Tasan, D. Ponge, D. Raabe, 2014 .

Superplastic martensitic Mn–Si–Cr–C steel with 900% elongation

D. Raabe, B. Bai, Han Zhang, 2011 .

Effect of molybdenum addition on the precipitation of carbides in the austenite matrix of titanium micro-alloyed steels

F. Jiang, Xin-jun Sun, Zheng-yan Zhang, 2016, Journal of Materials Science.

Concurrent enhancement of ductility and toughness in an ultrahigh strength lean alloy steel treated by bainite-based quenching-partitioning-tempering process

G. Gao, Xiaolu Gui, B. Bai, 2017 .

Enhanced strain hardening capacity in a lean alloy steel treated by a “disturbed” bainitic austempering process

Y. Weng, G. Gao, Xiaolu Gui, 2015 .

Tempering Behavior of Ductile 1700 MPa Mn–Si–Cr–C Steel Treated by Quenching and Partitioning Process Incorporating Bainite Formation

G. Gao, Xiaolu Gui, B. Bai, 2015 .

Enhanced ductility and toughness in an ultrahigh-strength Mn-Si-Cr-C steel: The great potential of ultrafine filmy retained austenite

G. Gao, Xiaolu Gui, B. Bai, 2014 .

Superplastic Mn–Si–Cr–C duplex and triplex steels: Interaction of microstructure and void formation

D. Ponge, D. Raabe, Han Zhang, 2014 .

Dynamic strain-induced transformation: An atomic scale investigation

D. Ponge, D. Raabe, H. Springer, 2015 .

Superplastic characteristic of Mn-Si-Cr alloyed ultrahigh carbon steel realized through a novel process

Lei Zhang, B. Bai, Xiaole Cheng, 2010 .

An ultrahigh strength steel with ultrafine-grained microstructure produced through superplastic forming

Lei Zhang, B. Bai, Xiaole Cheng, 2010 .

Improving the mechanical properties of Fe – TiB2 high modulus steels through controlled solidification processes

D. Raabe, H. Springer, Han Zhang, 2016 .

In-situ metal matrix composite steels: Effect of alloying and annealing on morphology, structure and mechanical properties of TiB2 particle containing high modulus steels

D. Raabe, H. Springer, A. Szczepaniak, 2016 .

Designing quadplex (four-phase) microstructures in an ultrahigh carbon steel

D. Ponge, D. Raabe, Han Zhang, 2014 .

The tempering behavior of granular structure in a Mn-series low carbon steel

B. Bai, H. Fang, Xiaole Cheng, 2011 .

A carbide-free bainite/martensite/austenite triplex steel with enhanced mechanical properties treated by a novel quenching-partitioning-tempering process

G. Gao, B. Bai, Wenbo Liu, 2013 .

Enhanced TRIP effect in a lean alloy steel treated by a ‘disturbed’ bainitic austempering process

Y. Weng, G. Gao, Xiaolu Gui, 2019, Heat Treatment and Surface Engineering.

Evolution of (Ti, Mo)C particles in austenite of a Ti–Mo-bearing steel

F. Jiang, Chunhuan Guo, Zhenqiang Wang, 2016 .

Very high cycle fatigue behaviors of bainite/martensite multiphase steel treated by quenching-partitioning-tempering process

Cheng Cheng, G. Gao, B. Bai, 2016 .

On structure-property relationship in nanostructured bainitic steel subjected to the quenching and partitioning process

R. Misra, G. Gao, B. Bai, 2016 .

A Mn-series of oil-quenched super-strength bainitic steel with high hardenability

B. Bai, H. Fang, Han Zhang, 2010 .

MEDIUM CARBON STEEL DEFORMED UNDER UNDERCOOLED AUSTENITE STATE: MEDIUM CARBON STEEL DEFORMED UNDER UNDERCOOLED AUSTENITE STATE

B. Bai, Han Zhang, 2010 .

New insights into the austenitization process of low-alloyed hypereutectoid steels: Nucleation analysis of strain-induced austenite formation

D. Ponge, D. Raabe, K. Pradeep, 2014 .

Co3O4 with upshifted d-band center and enlarged specific surface area by single-atom Zr doping for enhanced PMS activation.

Shuo Chen, X. Quan, Han Zhang, 2023, Journal of hazardous materials.