F. Penta

发表

A direct technique for the homogenization of periodic beam-like structures by transfer matrix eigen-analysis

A. Gesualdo, A. Iannuzzo, G. Pucillo, 2018, Latin American Journal of Solids and Structures.

On the homogenization of periodic beam-like structures

V. Rosiello, A. Gesualdo, L. Esposito, 2018 .

Homogenization of a Vierendeel girder with elastic joints into an equivalent polar beam

A. Gesualdo, A. Iannuzzo, G. Pucillo, 2017 .

A model for the mechanical behaviour of the railway track in the lateral plane

A. Gesualdo, F. Penta, 2018, International Journal of Mechanical Sciences.

A continuous model for the railway track analysis in the lateral plane

A. Gesualdo, G. Pucillo, S. Lisi, 2018 .

Mechanical properties of the most common European woods: a literature review

F. Berto, A. Siani, C. Bertolin, 2020, Frattura ed Integrità Strutturale.

Effect of curing overheating on interlaminar shear strength and its modelling in thick FRP laminates

C. Bellini, L. Sorrentino, L. Esposito, 2016, The International Journal of Advanced Manufacturing Technology.

Rocking of a rigid block freestanding on a flat pedestal

M. Monaco, A. Gesualdo, A. Iannuzzo, 2018, Journal of Zhejiang University-SCIENCE A.

Mechanical behavior of the imperial carroballista

Francesco Penta, Cesare Rossi, Sergio Savino, 2014 .

Structural Optimization of a Total Replacement Hip Prosthesis

M. Grasso, V. Rosiello, G. Pucillo, 2015 .

A four-parameters model for fatigue crack growth data analysis

Marzio Grasso, Francesco Penta, Giovanni Pio Pucillo, 2012 .

A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA

Francesco Penta, Salvatore Gerbino, Antonio Lanzotti, 2019, Procedia CIRP.

Low Velocity Impact Response of Composite Panels for Aeronautical Applications

Marzio Grasso, Francesco Penta, Giovanni Pio Pucillo, 2015 .

Effect of curing overheating on interlaminar shear strength and its modelling in thick FRP laminates

Luca Sorrentino, Francesco Penta, Costanzo Bellini, 2016 .

On the ballast–sleeper interaction in the longitudinal and lateral directions

Antonio De Iorio, Marzio Grasso, Francesco Penta, 2018 .

On the lateral stability of the sleeper-ballast system

Francesco Penta, Giovanni Pio Pucillo, Maddalena Catena, 2018 .

Development of Predictive Models for Fatigue Crack Growth in Rails

Antonio De Iorio, Marzio Grasso, George Kotsikos, 2011 .

Low-Velocity Impacts on a Polymeric Foam for the Passive Safety Improvement of Sports Fields: Meshless Approach and Experimental Validation

Antonio Lanzotti, Francesco Penta, Stephan Odenwald, 2018, Applied Sciences.

Rocking of a rigid block freestanding on a flat pedestal

Francesco Penta, Antonio Gesualdo, Antonino Iannuzzo, 2018 .

Transverse strength of railway tracks : Part 1. planning and experimental setup

Marzio Grasso, Francesco Penta, Stefano Rossi, 2014 .

Experimental Investigation of Thermal Passive-Reactive Sensors Using 4D-Printing and Shape-Memory Biopolymers

F. Berto, C. Bertolin, Chao Gao, 2022, Sustainability.

Preliminary optimization of shape memory polymers geometric parameters to enhance the thermal loads' activation range

F. Berto, F. Penta, F. Cesarano, 2022, Procedia Structural Integrity.

Composite Material Design for Rail Vehicle Innovative Lightweight Components

Salvatore Strano, Marzio Grasso, Andrea Genovese, 2015 .

Structural identification of tall buildings: a reinforced concrete structure as a case study

M. Monaco, A. Fortunato, A. Gesualdo, 2021, Case Studies in Construction Materials.

A Bayesian analysis of fatigue data

Maurizio Guida, Francesco Penta, M. Guida, 2010 .

Self-moments stiffening effect and buckling strength of periodic Vierendeel beams

F. Penta, 2020, Acta Mechanica.

Buckling analysis of periodic Vierendeel beams by a micro-polar homogenized model

F. Penta, 2020, Acta Mechanica.

On the mechanical characterization of materials by Arcan-type specimens

M. Grasso, G. Pucillo, F. Penta, 2011 .

Periodic beam-like structures homogenization by transfer matrix eigen-analysis: A direct approach

Francesco Penta, Antonio Gesualdo, Michelina Monaco, 2017 .

Buckling analysis of periodic Vierendeel beams by a micro-polar homogenized model

F. Penta, 2020 .

Analysis of suitable geometrical parameters for designing a tendon-driven under-actuated mechanical finger

Francesco Penta, Cesare Rossi, Sergio Savino, 2016 .

Analysis of suitable geometrical parameters for designing a tendon-driven under-actuated mechanical finger

S. Savino, Cesare Rossi, F. Penta, 2016, Frontiers of Mechanical Engineering.