Harshit K. Dave

发表

Effect of Orbital Tool Actuation during Electro Discharge Machining Process - A Critical Review

Sudhanshu Kumar, Harshit K. Dave, Keyur P. Desai, 2015 .

Investigations on Prediction of MRR and Surface Roughness on Electro Discharge Machine Using Regression Analysis and Artificial Neural Network Programming

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2008 .

Study on Compression Properties of ABS and FPU Parts Printed Using SLA

Harshit K. Dave, Ravi Teja Karumuri, Shilpesh R. Rajpurohit, 2021 .

Study on effect of process parameters on overcut and tool wear rate during micro-electro-discharge slotting process

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2016 .

ADVANCES IN MATERIAL PROCESSING

Harshit K. Dave, Harit K. Raval, 2015 .

End wear compensation during planetary EDM of Ti–6Al–4V by adaptive neuro fuzzy inference system

Harshit K. Dave, Keyur P. Desai, Vishal John Mathai, 2018, Prod. Eng..

Development of a model to compensate overcut during electro discharge boring process

Harshit K. Dave, Keyur P. Desai, Sudhanshu Kumar, 2019, Int. J. Manuf. Res..

A Parametric study of radial tool actuation in orbital EDM

Sudhanshu Kumar, Harshit K. Dave, Keyur P. Desai, 2015 .

Studies on quality of microholes generated on Al 1100 using micro-electro-discharge machining process

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2015 .

Experimental investigation on performance of different tool movement strategies in EDM process for boring operation

Sudhanshu Kumar, Harshit K. Dave, Keyur P. Desai, 2016 .

STUDIES ON TOOL WEAR CHARACTERISTICS IN MICRO ELECTRO DISCHARGE SLOTTING PROCESS (µ-EDS)

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2014 .

Optimisation of multiple response characteristics in orbital electro discharge machining of Inconel 718 using Taguchi's loss function

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2012, Int. J. Manuf. Technol. Manag..

Prediction and Optimization of Tensile Strength in FDM Based 3D Printing Using ANFIS

Harshit K. Dave, Shilpesh R. Rajpurohit, 2020 .

Application of Radial Tool Movement in Electrical Discharge Machining Process for Boring Operation

Harshit K. Dave, Keyur P. Desai, Sudhanshu Kumar, 2017 .

Development of a model to compensate overcut during electro discharge boring process

Harshit K. Dave, Keyur P. Desai, Sudhanshu Kumar, 2019 .

Characterisation and modelling of tool electrode wear during planetary EDM of titanium grade 5 alloy

Harshit K. Dave, Keyur P. Desai, Vishal John Mathai, 2020, Int. J. Manuf. Technol. Manag..

Modelling of cutting forces as a function of cutting parameters in milling process using regression analysis and artificial neural network

Harshit K. Dave, Harit K. Raval, H. Dave, 2010 .

Wear compensation in electrodischarge machining process using adaptive neuro fuzzy inference system

Harshit K. Dave, Keyur P. Desai, Vishal John Mathai, 2021 .

ANFIS-Based Prediction Model for Tool Wear Criteria During Orbital Electrical Discharge Machining of Ti6Al4V

Harshit K. Dave, Keyur P. Desai, Ashish R. Prajapati, 2021 .

Experimental investigations on EDM of Ti6Al4V with planetary tool actuation

Harshit K. Dave, Keyur P. Desai, Vishal John Mathai, 2017 .

Flexural strength of fused filament fabricated (FFF) PLA parts on an open-source 3D printer

Harshit K. Dave, Shilpesh R. Rajpurohit, S. R. Rajpurohit, 2018, Advances in Manufacturing.

Development of semi empirical model for predicting material removal rate during orbital electro discharge machining of Inconel 718

Harshit K. Dave, Keyur P. Desai, Harit K. Raval, 2013 .

Effect of process parameters on tensile strength of FDM printed PLA part

Harshit K. Dave, Shilpesh R. Rajpurohit, S. R. Rajpurohit, 2018, Rapid Prototyping Journal.

Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer

Harshit K. Dave, Shilpesh R. Rajpurohit, S. R. Rajpurohit, 2018, The International Journal of Advanced Manufacturing Technology.