Peter E. McHugh

发表

Introduction to Crystal Plasticity Theory

Peter E. McHugh, P. McHugh, 2004 .

Manufacturing of small featured PCL scaffolds for bone tissue engineering using selective laser sintering

Stefan Lohfeld, Valerie Barron, Peter E. McHugh, 2006 .

A Review of Material Degradation Modelling for the Analysis and Design of Bioabsorbable Stents

Caoimhe A. Sweeney, Peter E. McHugh, Enda L. Boland, 2015, Annals of Biomedical Engineering.

A continuum finite element model predicting cell motility

Peter E. McHugh, B. Flaherty, J. P. McGarry, 2006 .

Assessment of SLS fabricated scaffolds for skeletal reconstruction in the spine

Stefan Lohfeld, Valerie Barron, Peter E. McHugh, 2006 .

Comparison of the implicit and explicit finite element methods using crystal plasticity

Peter E. McHugh, Frank Harewood, P. McHugh, 2007 .

The effect of various bone conditions on the biomechanics of the thoracolumbar spine—finite element study

Valerie Barron, Peter E. McHugh, M. A. Tyndyk, 2006 .

A Dual-VENC Four-Dimensional Flow MRI Framework for Analysis of Subject-Specific Heterogeneous Nonlinear Vessel Deformation

Peter E. McHugh, Sherif Sultan, Niamh Hynes, 2020 .

Modelling of creep in a Ni base superalloy using a single crystal plasticity model

Peter E. McHugh, P. McHugh, R. Mohrmann, 1997 .

Development of a novel bioreactor to apply shear stress and tensile strain simultaneously to cell monolayers

Kevin B. Heraty, Nathan J. Quinlan, Peter E. McHugh, 2006 .

Computer Simulation of the Mechanical Behaviour of Implanted Biodegradable Stents in a Remodelling Artery

Claire Conway, Peter E. McHugh, Enda L. Boland, 2016 .

An atomistic study of void growth in single crystalline copper

Peter E. McHugh, Siegfried Schmauder, S. Schmauder, 2000 .

Vibration in an Automobile Internal Rear-View Mirror

Peter E. McHugh, M. O'Grady, B. McCarthy, 1996 .

Computational mechanics modelling of cell–substrate contact during cyclic substrate deformation

Peter E. McHugh, J. P. McGarry, Bruce P. Murphy, 2005 .

Fracture modelling of WC-Co hardmetals using crystal plasticity theory and the Gurson model

Peter E. McHugh, P. McHugh, P. Connolly, 1999 .

A finite element methodology for wear–fatigue analysis for modular hip implants

Noel M. Harrison, Sean B. Leen, Peter E. McHugh, 2013 .

Experimental mechanical testing of Poly (l-Lactide) (PLLA) to facilitate pre-degradation characteristics for application in cardiovascular stenting

Stefan Lohfeld, Reyhaneh Neghabat Shirazi, Peter E. McHugh, 2016 .

Computational modeling of metal matrix composite materials—II. Isothermal stress-strain behavior

Peter E. McHugh, C. F. Shih, R. J. Asaro, 1993 .

A Computational Test-Bed to Assess Coronary Stent Implantation Mechanics Using a Population-Specific Approach

Claire Conway, Peter E. McHugh, Faisal Sharif, 2012 .

Chapter 8 – Crystal Plasticity Models

Robert J. Asaro, Peter E. McHugh, P. McHugh, 1993 .

A combined experimental and computational study of deformation in grains of biomedical grade 316LVM stainless steel

Peter E. McHugh, Christian Motz, Thomas Connolley, 2006 .

Micromechanical modelling of the static and cyclic loading of an Al 2124-SiC MMC

M. S. Bruzzi, Peter E. McHugh, P. McHugh, 2001 .

Damage and failure of trabecular bone with non-linear geometry and inhomogeneous material properties

Patrick Mcdonnell, Noel M. Harrison, Peter E. McHugh, 2006 .

Evaluating the interaction of a tracheobronchial stent in an ovine in-vivo model

Peter E. McHugh, Barry O’Brien, Stefan Jockenhoevel, 2018, Biomechanics and modeling in mechanobiology.

Experimental characterisation for micromechanical modelling of CoCr stent fatigue.

Sean B. Leen, Caoimhe A. Sweeney, Peter E. McHugh, 2014, Biomaterials.

A method to fabricate small features on scaffolds for tissue engineering via selective laser sintering

Stefan Lohfeld, Valerie Barron, Peter E. McHugh, 2010 .

Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue

Sean B. Leen, Peter E. McHugh, S. Leen, 2012 .

Computational Examination of the Effect of Material Inhomogeneity on the Necking of Stent Struts Under Tensile Loading

Peter E. McHugh, Robert M. McMeeking, J. P. McGarry, 2007 .

Response of mesenchymal stem cells to the biomechanical environment of the endothelium on a flexible tubular silicone substrate.

Valerie Barron, Peter E. McHugh, Mary Murphy, 2008, Biomaterials.

An ovine in vivo framework for tracheobronchial stent analysis

Peter E. McHugh, Barry O’Brien, Stefan Jockenhoevel, 2017, Biomechanics and modeling in mechanobiology.

Computational modeling of metal matrix composite materials—III. Comparisons with phenomenological models

Peter E. McHugh, C. F. Shih, R. J. Asaro, 1993 .

The use of rapid prototype models for investigation of failure mechanisms in trabecular bone

Patrick Mcdonnell, Noel M. Harrison, D. O'Mahoney, 2006 .

Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modelling

Peter E. McHugh, J. P. McGarry, P. McHugh, 2004 .

Simulation of void growth in WC-Co hardmetals using crystal plasticity theory

Peter E. McHugh, D. F. Quinn, M. A. Howe, 1997 .

Engineering Assisted Surgery™: A route for digital design and manufacturing of customised maxillofacial implants

Stefan Lohfeld, Peter E. McHugh, N. Peckitt, 2007 .

Micromechanical modelling of ductile crack growth in the binder phase of WC–Co

Peter E. McHugh, P. McHugh, P. J. Connolly, 2003 .

Micromechanical methodology for fatigue in cardiovascular stents

Sean B. Leen, Caoimhe A. Sweeney, Peter E. McHugh, 2012 .

Computational modeling of metal matrix composite materials. I: Isothermal deformation patterns in ideal microstructures

Peter E. McHugh, C. F. Shih, R. J. Asaro, 1993 .

Computational modeling of metal matrix composite materials—IV. Thermal deformations

Peter E. McHugh, C. F. Shih, R. J. Asaro, 1993 .

A MULTISCALE APPROACH TO FAILURE ASSESSMENT IN DEPLOYMENT FOR CARDIOVASCULAR STENTS

Peter E. McHugh, James A. Grogan, Frank Harewood, 2010 .