T. Matuła

发表

Wastes from the coal-enrichment process as alternative reducers for lead smelting from lead-acid accmulator scrap

J. Filipczyk, L. Blacha, M. Niesler, 2013 .

Effects of pressure on the kinetics of manganese evaporation from the OT4 alloy

Rafał Burdzik, A. Smalcerz, Leszek Blacha, 2013 .

Changes in Ti-Al-Mn alloy compositions during their smelting in a vacuum induction furnace

A. Smalcerz, L. Blacha, B. Oleksiak, 2012 .

Modifications of the chemical composition and microstructure of flash smelting copper slags in the process of their reduction

T. Rzychoń, B. Chmiela, J. Łabaj, 2015 .

A study on the process of fine-grained plumbiferous material agglomeration

J. Łabaj, L. Blacha, M. Niesler, 2013 .

THE EFFECT OF CARBON REDUCER FORM ON COOPER RECOVERY FROM OXIDE SLAGS

G. Siwiec, J. Wieczorek, B. Oleksiak, 2014 .

Analog and digital topographic map of Presque Isle State Park : a report from Pennsylvania Department of Conservation and Natural Resources, Bureau of State Parks, Resources Management and Planning Division

T. Matuła, K. Taylor, 1995 .

Estimation of the operational reliability determined with Weibull modulus based on the abrasive wear in a cylinder-piston ring system

Jaroslaw Piątkowski, J. Piątkowski, T. Matuła, 2012 .

Reduction of copper slag with the use of carbon granulates

W. Stanek, G. Siwiec, B. Oleksiak, 2014 .

The Microstructure And Mechanical Properties Of The AlSi17Cu5 Alloy After Heat Treatment

J. Piątkowski, T. Matuła, 2015 .