Shigeru Ueda

发表

MOTION CHARACTERISTICS OF FLOATING BRIDGE IN WAVES ANCHORED WITH SUBMARINE CABLE

Satoru Shiraishi, Isao Fukuda, Shigeru Ueda, 2005 .

On Ship Motions Running into Guide Way

Katsuhiko Saito, Manabu Okada, Masayoshi Kubo, 1992 .

Dynamic Wireless-path Selection Control(14:40 Poster Session 2 (Community Computing Networks 1))

Shigeru Ueda, Hisao Kumai, 2005 .

Engineering considerations for a floating swing arch bridge in the port of Osaka

Hiroshi Tanaka, Eiichi Watanabe, Shigeru Ueda, 2000 .

STUDY ON RELIABILITY-BASED DESIGN METHOD FOR FENDERS BASED ON FORM

Takashi Nagao, Shigeru Ueda, Tatsuhiko Okada, 2003 .

SEISMIC RESPONSE CHARACTERISTICS OF FLOATING BRIDGE ANCHORED WITH SUBMARINE CABLE

Takahiro Sugano, Isao Fukuda, Shigeru Ueda, 2005 .

CHRACTERISTICS OF MEASURED BERTHING VELOCITY AND THE APPLICATION FOR FENDER DESIGN OF BERTHING SHIP

Kentaro Shimizu, Shigeru Ueda, Tatsuhiko Okada, 2013 .

Guideline for evaluating uncertainty of the long-term stability of JCCLS certified reference standard for enzyme of JSCC method

Susumu Osawa, Yasushi Takagi, Kazunori Miyake, 2013 .

Analytical Method of Ship Motions Moored to Quay Walls and Application to Port Planning

Shigeru Ueda, 1987 .

Ship Motions Moored at Quay Walls and Their Effects to Wharf Operation Efficiency

Satoru Shiraishi, Shigeru Ueda, 1989 .

Preface for Thematic Section: Sustainable Iron and Steelmaking

Il Sohn, Shigeru Ueda, 2019, Journal of Sustainable Metallurgy.

Berthing Energy Absorption For Large Container Vessels

Shigeru Ueda, Seigi Yamase, Motohiro Yasui, 2006 .

SHAKING TABLE TESTS FOR DYNAMIC RESPONSE OF A WHARF WITH COUPLED BATTER PILES

Takahiro Sugano, Hiroshi Yokota, Shigeru Ueda, 2001 .

Reliability design method of fender for berthing ship

Shuji Yamamoto, Satoru Shiraishi, Shigeru Ueda, 2002 .

Characteristics of solid flow and stress distribution including asymmetric phenomena in blast furnace analyzed by discrete element method

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

Sensitivity Analysis of Physical Parameters in Discrete Element Method Compared with Blast Furnace Cold Model Experiments

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

DEM-CFD Model Considering Softening Behavior of Ore Particles in Cohesive Zone and Gas Flow Analysis at Low Coke Rate in Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2012 .

Effect of High Reactivity Coke for Mixed Charge in Ore Layer on Reaction Behavior of Each Particle in Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2013 .

Influences of Physical Properties of Particle in Discrete Element Method on Descending Phenomena and Stress Distribution in Blast Furnace

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2010 .

Improvement of Reactivity of Carbon Iron Ore Composite with Biomass Char for Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2009 .

Experimental Study and Atomic Level Description of Adsorption Process of CO2 on Doped Alkaline Earth Oxides

Yoshiyuki Kawazoe, Tatsuro Ariyama, Ryo Inoue, 2012 .

Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2011 .

Reaction Model and Reduction Behavior of Carbon Iron Ore Composite in Blast Furnace

Tatsuro Ariyama, Ryo Inoue, Shigeru Ueda, 2009 .

Influence of Shape of Cohesive Zone on Gas Flow and Permeability in the Blast Furnace Analyzed by DEM-CFD Model

Tatsuro Ariyama, Hiroshi Nogami, Shigeru Ueda, 2015 .

Influence of Blast Furnace Inner Volume on Solid Flow and Stress Distribution by Three Dimensional Discrete Element Method

Tatsuro Ariyama, Ryo Inoue, Satoru Igarashi, 2010 .

Transient Behavior of Burden Descending and Influence of Cohesive Zone Shape on Solid Flow and Stress Distribution in Blast Furnace by Discrete Element Method

Tatsuro Ariyama, Junya Kano, Ryo Inoue, 2010 .

Gas–solid flow simulation of fines clogging a packed bed using DEM–CFD

Tatsuro Ariyama, Hiroshi Nogami, Junya Kano, 2012 .