Julie M. Schoenung

发表

Design parameters and environmental impact of printed wiring board manufacture

Julie M. Schoenung, Elsa Olivetti, Maria Lourdes Alcaraz Ochoa, 2019, Journal of Cleaner Production.

Review on laser powder injection additive manufacturing of novel alloys and composites

Julie M. Schoenung, Nancy Y. C. Yang, Baolong Zheng, 2016, SPIE LASE.

The devil that we know: lead (Pb) replacement policies under conditions of scientific uncertainty

Julie M. Schoenung, Hai-Yong Kang, Jean-Daniel Saphores, 2003 .

Environmental and economic evaluation of cathode ray tube (CRT) funnel glass waste management options in the United States

Julie M. Schoenung, Wenzhi He, Qingbo Xu, 2013 .

Advancing Alternative Analysis: Integration of Decision Science

Julie M. Schoenung, Igor Linkov, Thomas P. Seager, 2017, Environmental health perspectives.

Toxicity potential indicator analysis for alternatives recommendations in the RIO Tronics utility meter pulse products

Oladele A. Ogunseitan, Julie M. Schoenung, Andrew A. Shapiro, 2011, Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology.

A test-rework process yield performance model for estimation of printed wiring board assembly cost

Julie M. Schoenung, Xiaoying Zhou, Koki Shimohashi, 2009 .

Research and Education in Green Materials: A multi-disciplinary program to bridge the gaps

Oladele A. Ogunseitan, Julie M. Schoenung, David A. Eastmond, 2009, 2009 IEEE International Symposium on Sustainable Systems and Technology.

Teaching green topics to chemical engineers: Innovation in the process design curriculum

Julie M. Schoenung, 2009, 2009 IEEE International Symposium on Sustainable Systems and Technology.

Adopting Lead‐Free Electronics: Policy Differences and Knowledge Gaps

Oladele A. Ogunseitan, Julie M. Schoenung, Andrew A. Shapiro, 2004 .

Observations of particle-melt pool impact events in directed energy deposition

Julie M. Schoenung, J. Schoenung, E. Lavernia, 2018, Additive Manufacturing.

Investigation of atypical molten pool dynamics in tungsten carbide-cobalt during laser deposition using in-situ thermal imaging

Julie M. Schoenung, Jean-Pierre Delplanque, William H. Hofmeister, 2012 .

Fabrication of WC–Co cermets by laser engineered net shaping

Julie M. Schoenung, John E. Smugeresky, J. Schoenung, 2008 .

A Statistical Analysis of Powder Flowability in Metal Additive Manufacturing

Julie M. Schoenung, Parnian Kiani, J. Schoenung, 2020, Advanced Engineering Materials.

A streamlined life cycle assessment on the fabrication of WC–Co cermets

Julie M. Schoenung, Xiaoying Zhou, J. Schoenung, 2008 .

The Electronics Revolution: From E-Wonderland to E-Wasteland

Oladele A. Ogunseitan, Julie M. Schoenung, Andrew A. Shapiro, 2009, Science.

Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion

Julie M. Schoenung, Baolong Zheng, John E. Smugeresky, 2008 .

The influence of working distance on laser deposited WC–Co

Julie M. Schoenung, John E. Smugeresky, J. Schoenung, 2009 .

A tri-modal aluminum based composite with super-high strength

Julie M. Schoenung, Jichun Ye, Byungmin Ahn, 2005 .

Flow battery production: Materials selection and environmental impact

Oladele A. Ogunseitan, Julie M. Schoenung, Scott Samuelsen, 2020, Journal of Cleaner Production.

Process Cost Comparison for Conventional and Near‐Net‐Shape Cermet Fabrication

Julie M. Schoenung, J. Schoenung, Y. Xiong, 2010 .

Orientation Effects on Fatigue Behavior of Additively Manufactured Stainless Steel

Julie M. Schoenung, Joshua D. Sugar, Chris San Marchi, 2017 .

Microstructure and wear resistance of WC–Co by three consolidation processing techniques

Julie M. Schoenung, J. Schoenung, Y. Xiong, 2009 .

Combined Hydrogen, Heat and Power (CHHP) pilot plant design

Julie M. Schoenung, Mengjing Yu, Maggie Mei, 2013 .

Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix composites

Julie M. Schoenung, Shirong Ge, Hua Zhu, 2008 .

Mechanical Behavior and Strengthening Mechanisms in Ultrafine Grain Precipitation-Strengthened Aluminum Alloy

Julie M. Schoenung, Dieter Isheim, David N. Seidman, 2014 .

Technical Cost Modeling for the Mechanical Milling at Cryogenic Temperature (Cryomilling)

Julie M. Schoenung, Jichun Ye, J. Ye, 2004 .

Reuse of powder feedstock for directed energy deposition

Julie M. Schoenung, Benjamin E. MacDonald, J. Schoenung, 2018, Powder Technology.

Working distance passive stability in laser directed energy deposition additive manufacturing

Julie M. Schoenung, Baolong Zheng, J. Schoenung, 2019, Materials & Design.

(Ti,W)C–Ni cermets by laser engineered net shaping

Julie M. Schoenung, Y. Xiong, M. Kim, 2010 .

Thermal Behavior and Microstructure Evolution during Laser Deposition with LENS?: Part II Experimental Investigation and Discussion.

Julie M. Schoenung, Baolong Zheng, John E. Smugeresky, 2008 .

Relationship between manufacturing defects and fatigue properties of additive manufactured austenitic stainless steel

Julie M. Schoenung, Joshua D. Sugar, J. Schoenung, 2019, Materials Science and Engineering: A.

Human health and ecotoxicological considerations in materials selection for sustainable product development

Oladele A. Ogunseitan, Julie M. Schoenung, J. Schoenung, 2012 .