Mina Guli

发表

Facilitate hole transport with thin 2D perovskite capping layer to passivate interface defects of 3D perovskite solar cells using PEABr

Yifan Yang, Maurice Davy Malouangou, Yujing Zhang, 2022, Materials Research Bulletin.

Preparation and characterisation of TiO2 nanorod and nanotube films as photoanodes for dye-sensitised solar cells

Zhe Hu, Zheng Zhou, Jianxi Yao, 2017 .

Lead acetate (PbAc2)-derived and chloride-doped MAPbI3 solar cells with high fill factor resulting from optimized charge transport and trap state properties

Jiawei Wu, J. Pan, Molang Cai, 2021, Solar Energy.

Molecular engineering of simple carbazole-arylamine hole-transport materials for perovskite solar cells

M. Nazeeruddin, C. Liu, Shuangchen Ma, 2020 .

Active phase stabilization and photovoltaic performance improvement in mixed-cation formamidinium cesium lead iodide via dimensional engineering with 5-ammonium valeric acid bromide

Yifan Yang, Maurice Davy Malouangou, Yujing Zhang, 2022, Sustainable Materials and Technologies.

Recent progress in tailoring the properties of inorganic CsPbX3 perovskites with functional organic compounds: a route to enhanced efficiency and operational stability in CsPbX3-based photovoltaics

Yifan Yang, J. N. Nzobadila Ondze, Luyun Bai, 2021, Journal of Materials Chemistry C.

First-principles study on the electronic properties of perovskites MASnaPb(1 − a)XbY(3 − b) (X, Y = Cl, Br, I)

Mina Guli, Theogene Bimenyimana, Sheng Chen, 2019, Results in Physics.

Improving the properties of MA-based wide-bandgap perovskite by simple precursor salts engineering for efficiency and ambient stability improvement in solar cells

Yifan Yang, Maurice Davy Malouangou, Yujing Zhang, 2022, Solar Energy Materials and Solar Cells.

Additive engineering for Sn-based PSCs: Enhancement of open-circuit voltage and fill factor

D. Maurice, Minghan Deng, Luyun Bai, 2021 .

Dimension-controlled Growth of Antimony-based Perovskite-like Halide for Lead-free and Semitransparent Photovoltaics.

M. Nazeeruddin, C. Liu, Shuangchen Ma, 2020, ACS applied materials & interfaces.

Preparation and characterization of TiO2 anode film with hierarchical structure by photo-induced polymerization method

Jianxi Yao, Jingyong Zhao, Mina Guli, 2013, Journal of Porous Materials.

Template-directed synthesis of nanoplasmonic arrays by intracrystalline metalization of cross-linked lysozyme crystals.

S. Mann, Mei Li, Mina Guli, 2010, Angewandte Chemie.

Characterization Methodology and Activity Evaluation of Solar-Driven Catalysts for Environmental Remediation

J. Pan, J. Schneider, Elsayed T. Helmy, 2022, Topics in Current Chemistry.

Preparation and characterization of TiO2 anode film with spinodal phase separation structure in dye-sensitized solar cells

Jianxi Yao, Li Xiao, Jingyong Zhao, 2013 .

Fabrication of photoluminescent hybrid protein crystals of lysozyme and bromophenol blue

S. Mann, Zhe Hu, Jianxi Yao, 2015, Journal of Materials Science.

Optical performance of mesostructured composite silica film loaded with organic dye.

Jianxi Yao, Xiaotian Li, Li Xiao, 2014, Applied optics.

Hierarchical structure and photocatalysis performance of the photo-anode TiO2 film

Zhe Hu, Minghan Deng, Mina Guli, 2017 .

Enhancing the efficiency and stability of 2D-3D perovskite solar cells with embedded interface passivation with diammonium cation spacer

Eric Rop, Yifan Yang, Maurice Davy Malouangou, 2023, Solar Energy Materials and Solar Cells.

Synthesis and Photocatalytic Properties of TiO2 Film with Hierarchical Structure Prepared by Sol-Gel Method

J. Zhao, Jianxi Yao, Mina Guli, 2012 .

Effect of template-removing methods and modification to mesoporous blank silica and composited silica

Jianxi Yao, Xiaotian Li, L. Zhang, 2012 .

Degradation mechanism and addressing techniques of thermal instability in halide perovskite solar cells

Yifan Yang, Luyun Bai, M. Mbumba, 2021, Solar Energy.

Inorganic copper-based hole transport materials for perovskite photovoltaics: Challenges in normally structured cells, advances in photovoltaic performance and device stability

D. Maurice, Luyun Bai, Jadel Tsiba Matondo, 2021 .

Compositional engineering solutions for decreasing trap state density and improving thermal stability in perovskite solar cells

Yifan Yang, Luyun Bai, M. Mbumba, 2021, Journal of Materials Chemistry C.

Research progress of atomic layer deposition technology to improve the long-term stability of perovskite solar cells

J. Pan, Songyuan Dai, Molang Cai, 2021, Journal of Materials Chemistry C.

Optimization of Bulk Defects in Sn/Pb Mixed Perovskite Solar Cells Through Synergistic Effect of Potassium Thiocyanate

Jiawei Wu, D. Maurice, Luyun Bai, 2020 .

Thermally stable perovskite solar cells with efficiency over 21% via a bifunctional additive

Yong Ding, Songyuan Dai, Molang Cai, 2020, Journal of Materials Chemistry A.

Controllable preparation and improved performance of TiO2 photocatalysts with various structures

Yu He, Oumin Wang, Mina Guli, 2020, Materials Technology.

Low‐Temperature Atomic Layer Deposition of Double‐Layer Water Vapor Barrier for High Humidity Stable Perovskite Solar Cells

Molang Cai, Ran Li, Yifan Yang, 2023, Advanced Optical Materials.

Recent progress in perovskite materials using diammonium organic cations toward stable and efficient solar cell devices: Dion Jacobson (DJ)

Yifan Yang, Maurice Davy Malouangou, Yujing Zhang, 2022, Energy Technology.

Enhanced photoelectric performance of nanorod TiO2 film embedded with gold nanoparticles applied in dye sensitized solar cells studied by OptiFDTD

Minghan Deng, Mina Guli, Theogene Bimenyimana, 2018, Optical Materials.

Photoluminescence and laser properties of mesostructured SBA-15 monolith doped with coumarin 151

Xiaotian Li, Kan Zhang, Y. Chi, 2010 .

Synthesis and characterization of structure optimized film doped with Rhodamine 6G

Dongge Ma, Jianxi Yao, Xiaotian Li, 2011 .

Synthesis of Porous TiO2 Thin Films via Sol-Gel Method and their Phototocatalyst Performances

T. Yoko, Jianxi Yao, Masahide Takahashi, 2011 .

Effect of thermal treatment on TiO2 nanorod electrodes prepared by the solvothermal method for dye-sensitized solar cells: Surface reconfiguration and improved electron transport

Li Xiao, Jingyong Zhao, Jianxi Yao, 2014 .

A Synergy Effect of Coadditives for Vertical Orientation of Two-Dimensional Perovskite Solar Cells Based on Butylammonium Iodide with Improved Efficiency

Yifan Yang, Maurice Davy Malouangou, Luyun Bai, 2021, ACS Applied Energy Materials.

Encapsulation of Coumarin 151 into the mesopores of modified rodlike SBA-15

Jixue Li, S. Qiu, H. Ding, 2010 .

Template-directed synthesis of nanoplasmonic arrays by intracrystalline metalization of cross-linked lysozyme crystals.

S. Mann, Mei Li, Mina Guli, 2010, Angewandte Chemie.

Plasmon TiO2 nanotube arrays doped with silver nanoparticles act as photo-anode film in solar cells

Zhe Hu, Songyuan Dai, Minghan Deng, 2018 .