W. Xiao

发表

Springback analysis of 6016 aluminum alloy sheet in hot V-shape stamping

Baoyu Wang, Xiaoming Yang, Weiping Ma, 2019, Journal of Central South University.

An experimental and numerical investigation on the formability of AA7075 sheet in hot stamping condition

Kailun Zheng, Baoyu Wang, W. Xiao, 2017 .

Deep drawing of aluminum alloy 7075 using hot stamping

Xuefeng Tang, Baoyu Wang, Weiping Ma, 2017, Rare Metals.

Behaviors and modeling of thermal forming limits of AA7075 aluminum sheet

Baoyu Wang, W. Xiao, 2020, Archives of Civil and Mechanical Engineering.

Constitutive modeling of flow behavior and microstructure evolution of AA7075 in hot tensile deformation

Baoyu Wang, Yong Wu, Xiaoming Yang, 2018 .

Damage evolution of 7075 aluminum alloy basing the Gurson Tvergaard Needleman model under high temperature conditions

H. Ji, Baoyu Wang, Xiaomin Huang, 2021, Journal of Materials Research and Technology.

The prediction of part thickness using machine learning in aluminum hot stamping process with partition temperature control

Kailun Zheng, W. Xiao, Hanrong Cai, 2022, The International Journal of Advanced Manufacturing Technology.

Multi-objective optimization with automatic simulation for partition temperature control in aluminum hot stamping process

Kailun Zheng, W. Xiao, H. Cai, 2022, Structural and Multidisciplinary Optimization.

Influence of solution heat treatment on mechanical response and fracture behaviour of aluminium alloy sheets: An experimental study

Xuefeng Tang, Jing Zhou, Wen-yu Ma, 2015 .

Behavior and modeling of flow softening and ductile damage evolution in hot forming of TA15 alloy sheets

Gang Liu, W. Xiao, Lei Yang, 2015 .

A new method for manufacturing hollow valves via cross wedge rolling and forging: Numerical analysis and experiment validation

Baoyu Wang, Zhenghuan Hu, Jinping Liu, 2017 .

A physically based constitutive model of Ti-6Al-4 V and application in the SPF/DB process for a pyramid lattice sandwich panel

Minghe Chen, Kailun Zheng, Yong Wu, 2021, Archives of Civil and Mechanical Engineering.

Characterization of the Microstructures and Dynamic Recrystallization Behavior of Ti-6Al-4V Titanium Alloy through Experiments and Simulations

H. Ji, Xiaomin Huang, W. Xiao, 2021, Journal of Materials Engineering and Performance.

High-temperature anisotropic behaviors and microstructure evolution mechanisms of a near-α Ti-alloy sheet

Minghe Chen, Kehuan Wang, Yong Wu, 2021, Materials Science and Engineering: A.

Constitutive modeling of softening mechanism and damage for Ti–6Al–4V alloy and its application in hot tensile simulation process

Jing Zhou, Pengni Feng, W. Xiao, 2021, Archives of Civil and Mechanical Engineering.

Effect of vacuum annealing on microstructure and mechanical properties of TA15 titanium alloy sheets

Gang Liu, W. Xiao, Lei Yang, 2015 .

Experimental Investigations of the In-Die Quenching Efficiency and Die Surface Temperature of Hot Stamping Aluminium Alloys

Baoyu Wang, Kailun Zheng, Jianguo Lin, 2018 .

Influence of process parameters on deep drawing of 2060 Al–Li alloy under hot stamping process

Jing Zhou, Liming Dang, Yao-qi Wang, 2020 .

Research on High Temperature Stamping Forming Performance and Process Parameters Optimization of 7075 Aluminum Alloy

H. Ji, Xuefeng Tang, Zhengxiang Ma, 2021, Materials.

Study on formability of duplex steel expansion pipe and its threaded joints

H. Ji, S. Dong, Xiaomin Huang, 2023, Measurement.

A systematic review of artificial intelligence in the detection of cutting tool breakage in machining operations

H. Ji, W. Xiao, Bao-yu Wang, 2022, Measurement.

Springback prediction of 7075 aluminum alloy V-shaped parts in cold and hot stamping

Jing Zhou, W. Xiao, Bao-yu Wang, 2021, The International Journal of Advanced Manufacturing Technology.

Experimental characterization of heat transfer coefficients for hot stamping AA7075 sheets with an air gap

Kailun Zheng, W. Xiao, Bao-yu Wang, 2020, Archives of Civil and Mechanical Engineering.

Research on the Corrosion Behavior of Q235 Pipeline Steel in an Atmospheric Environment through Experiment

H. Ji, Weichi Pei, Xuefeng Tang, 2022, Materials.

Dynamic recrystallization of Ti-6Al-4V titanium alloy based on cellular automata

H. Ji, Xiaomin Huang, W. Xiao, 2022, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Numerical Analysis and Parameter Optimization of Wear Characteristics of Titanium Alloy Cross Wedge Rolling Die

H. Ji, Xiaomin Huang, W. Xiao, 2021, Metals.

Springback analysis of 6016 aluminum alloy sheet in hot V-shape stamping

W. Xiao, Yi-tao Kang, Bao-yu Wang, 2019, Journal of Central South University.

Precision hot forging forming experiment and numerical simulation of a railway wagon bogie adapter

H. Ji, Weichi Pei, Xiaomin Huang, 2022, The International Journal of Advanced Manufacturing Technology.

Optimization of aluminium sheet hot stamping process using a multi-objective stochastic approach

Jing Zhou, Wen-yu Ma, W. Xiao, 2016 .

HOT-DEFORMATION BEHAVIOR AND PROCESSING MAP OF 22MnB5 HIGH-STRENGTH STEEL

H. Ji, Weichi Pei, W. Xiao, 2023, Materiali in tehnologije.