Carlos Martins

发表

Heat exchanger has plates

Carlos Martins, Michel Potier, 2004 .

piston movement coordination device of a compression machine and relaxation

Eric Droulez, Bertrand Gessier, Carlos Martins, 2015 .

Fluid pipe coupling device for automobile heat exchanger

Carlos Martins, マルタンカルロ, 1993 .

Condensation product i.e. hot gas, filtering module for e.g. charge air cooler, of oil engine of motor vehicle, has collection unit collecting and guiding condensation products towards recovery unit to permit recovery of products

Serge Pouysegur, Carlos Martins, Guillaume Bourgoin, 2007 .

Heat exchanger for a vehicle made from a bundle of thermoplastic tubes and end blocks

Carlos Martins, Yvon Raynaud, 1998 .

Concrete upgrade to improve the vibration response of timber floors

Peter Walker, Richard Harris, Kevin Paine, 2014 .

A heat exchanger comprising a heat exchange bundle arranged in a housing

Carlos Martins, Michel Potier, 2005 .

Gas distribution manifold in the cylinder head of an engine with mixture of recirculated exhaust gas against the tide of inlet gas.

Bertrand Gessier, Carlos Martins, 2010 .

Power converters for the magnets of the Linac Warm Units of ESS

Carlos Martins, Max Collins, Roberto Visintini, 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

Heat exchanger for turbocharged engine air admission circuit comprises body divided into part with passages for supercharged air and part with passages for exhaust gases, and also comprises passages for common cooling fluid

Carlos Martins, Michel Potier, 2002 .

Fraud detection using heavy hitters: a case study

Bruno Veloso, Carlos Martins, João Gama, 2020, SAC.

cooling module of the charge air and recirculated exhaust gases of an internal combustion engine of a motor vehicle.

Carlos Martins, Michel Potier, Matthieu Chanfreau, 2003 .

Non-Destructive Methodologies for Assessment of the Mechanical Properties of New Utility Poles

Carlos Martins, Alfredo M. P. G. Dias, André Filipe Silva Marques, 2017 .

A Room Acoustics Measurement Technique Based on a Perceptual Model for Annoyance Minimization

Carlos Martins, Joel Paulo, J. Luis Bento Coelho, 2007 .

Simulation and optimisation of atmospheric and vacuum distillations of a lube plant

Carlos A. V. Costa, Carlos Martins, Fernando G. Martins, 2000 .

Heat exchanger e.g. super charge air cooler, for cooling exhaust gas of motor vehicle engine, has inlet and outlet collection boxes provided for exhaust gas flow on both sides of heat exchange beam

Carlos Martins, Matthieu Chanfreau, Alexandre Potier, 2003 .

Carter heat exchanger

Carlos Martins, Jean Lathiere, 2006 .

Acoustic performance of timber and timber-concrete floors

Pedro de Almeida, Carlos Martins, Alfredo M. P. G. Dias, 2015 .

Intake air cooler for an internal combustion engine turbocharged two floors and supercharging air circuit corresponding

Carlos Martins, Michel Potier, 2005 .

Reinforcement of Timber Floors-Transversal Load Distribution on Timber-Concrete Systems

Carlos Martins, Alfredo M. P. G. Dias, Sandra R.S. Monteiro, 2013 .

Modeling User Interfaces with the XIS UML Profile

Alberto Rodrigues da Silva, Carlos Martins, 2007, ICEIS.

THE RF POWER SOURCE FOR THE HIGH BETA ELLIPTICAL CAVITIES OF THE ESS LINAC

Rihua Zeng, Roger Ruber, H. Danared, 2011 .

An Automated and Distributed Machine Learning Framework for Telecommunications Risk Management

Carlos Martins, Paulo Cortez, André Pilastri, 2020, ICAART.

Assessment and Evaluation of the E-ARK Pilots and Tools

Bruno Martins, Alberto Rodrigues da Silva, Janet Anderson, 2018 .

A valve plug, plug for such a valve and gas inlet circuit in an engine vehicle with such a valve

Jean-Sylvain Bernard, Carlos Martins, Silva Carlos Da, 2009 .

Supporting Informed Decision Making in Prevention of Prostate Cancer

Goreti Marreiros, Constantino Martins, Carlos Martins, 2015, DCAI 2015.

Fluid circulation control valve for automobile engine cooling circuit, has one input and two or three outputs and output fluid regulating part, with a sloping end, which rotates inside the valve body

Carlos Martins, Matthieu Chanfreau, 2001 .

Validation of Structural Reinforcement Solutions, in Execution Phase

Carlos Martins, Patrícia Barros, Jorge Renda, 2017 .

A case study on using heavy-hitters in interconnect bypass fraud

Bruno Veloso, Carlos Martins, João Gama, 2020, ACM SIGAPP Applied Computing Review.

Interconnect bypass fraud detection: a case study

João Gama, Shazia Tabassum, Bruno Veloso, 2020, Annals of Telecommunications.

Detecting Bursts of Activity in Telecommunications

João Gama, Bruno Veloso, Carlos Martins, 2019, BigMine@KDD.

XIS-UML Profile for eXtreme Modeling Interactive Systems

Rui Silva, Alberto Rodrigues da Silva, Carlos Martins, 2007, Fourth International Workshop on Model-Based Methodologies for Pervasive and Embedded Software (MOMPES'07).

Heat exchange module comprising a fan shroud and a heat exchanger, particularly for a motor vehicle

Carlos Martins, Christian Mahe, 1998 .

Automobile heat exchanger with reinforced plate manifold

Carlos Martins, Frederic Letrange, 1995 .

Two different approaches for RDC modelling when simulating a solvent deasphalting plant

Carlos A. V. Costa, Carlos Martins, Fernando G. Martins, 2002 .

Engine Cooling Multi-Exchanger

Carlos Martins, Michel Potier, Stephane Avequin, 2001 .

Monitoring the Thermal Efficiency of Fouled Heat Exchangers: A Simplified Method

Luís F. Melo, Carlos Martins, Manuel A.S. Jerónimo, 1997 .