K. Schwalbe

发表

A simple method for the calculation of crack tip opening displacement of a center cracked tensile panel in net section yield

K. Schwalbe, 1984 .

Structural Integrity Assessment of Thin‐Walled Structures

U. Zerbst, W. Brocks, K. Schwalbe, 2006 .

Application of the Electrical Potential Method to Crack Length Measurements Using Johnson's Formula

Ka Peters, Rl Meltzer, Rt Horstman, 1981 .

On the Experimental Determination of CTOD Based R-Curves

K.-H. Schwalbe, D. Hellmann, D. Hellmann, 1986 .

The crack tip opening displacement in elastic-plastic fracture mechanics : Proceedings of the Workshop on the CTOD Methodology, GKSS-Forschungszentrum Geesthacht, GmbH, Geesthacht, Germany, April 23-25, 1985

K. H. Schwalbe, K. Schwalbe, 1986 .

The linear normalization technique―an alternative procedure for determining J-R curves from a single specimen test record based on Landes' normalization method

K.-H. Schwalbe, E. D. Reese, K. Schwalbe, 1993 .

Discussion: “Finite Element Solutions of Crack-Tip Behavior in Small Scale Yielding” (Tracey, D. M., 1976, ASME J. Eng. Mater. Technol., 98, pp. 146–151)

K. Schwalbe, 1977 .

ESIS P6-98 : Procedure to measure and calculate material parameters for the local approach to fracture using notched tensile specimens

H. Riesch-Oppermann, H. Riesch-Oppermann, K. H. Schwalbe, 1999 .

DRAFT EGF RECOMMENDATIONS FOR DETERMINING THE FRACTURE RESISTANCE OF DUCTILE MATERIALS: EGF PROCEDURE EGF P1–87D

K.-H. Schwalbe, B. K. Neale, B. Neale, 1988 .

Recommendations for the measurement of R-curves using centre-cracked panels

D. Rooke, W. Setz, K. Schwalbe, 1982 .

Geometry and Size Effects on J-R and δ-R Curves under Plane Stress Conditions

D. Hellmann, K-H Schwalbe, D Hellmann, 1984 .

Measurement of Stable Crack Growth Including Detection of Initiation of Growth Using the DC Potential Drop and the Partial Unloading Methods

J. Heerens, J. Heerens, D. Hellmann, 1985 .