Michel Havet

发表

Contaminations particulaire et microbiologique dans une salle blanche agroalimentaire

Michel Havet, Olivier Rouaud, Frédéric Hennequin, 2001 .

Michel Havet, Sylvie Chevallier, Alain Le-Bail, 2012 .

Influence of external perturbations on a minienvironment: experimental investigations

Michel Havet, O. Rouaud, C. Solliec, 2004 .

Numerical investigation on the efficiency of transient contaminant removal from a food processing clean room using ventilation effectiveness concepts

Michel Havet, Olivier Rouaud, M. Havet, 2005 .

Reference Trajectory Tracking of Superficial Temperature in Food Decontamination

Michel Havet, Olivier Rouaud, Lionel Boillereaux, 2004 .

Thermal performance modelling of solar collector with heat storage

Michel Havet, Martin Kamta, César Kapseu, 2017 .

Model Predictive Control Applied to Thermal Regulation of Thermoforming Process Based on the Armax Linear Model and a Quadratic Criterion Formulation

Michel Havet, Lionel Boillereaux, Rémi Deterre, 2017 .

Implementation of a parametric procedure allowing efficient positioning of heat sources: application to high-temperature composites thermoforming process

Michel Havet, Lionel Boillereaux, Rémi Deterre, 2017 .

Observer-based tracking control of superficial temperature

Michel Havet, Olivier Rouaud, Lionel Boillereaux, 2006 .

Influence of surface roughness on the supercooling degree: Case of selected water/ethanol solutions frozen on aluminium surfaces

Michel Havet, Guillaume Muller, Alain Le-Bail, 2006 .

Modelling coupled heat–water transfers during a decontamination treatment of the surface of solid food products by a jet of hot air—II. Validations of product surface temperature and water activity under fast transient air temperature conditions

Michel Havet, Olivier Rouaud, A. M. Foster, 2006 .

Experimental investigations of an air curtain device subjected to external perturbations

Michel Havet, O. Rouaud, C. Solliec, 2003 .

Computation of the airflow in a pilot scale clean room using K-ε turbulence models

Michel Havet, Olivier Rouaud, M. Havet, 2002 .

Assessment of the Electrohydrodynamic Drying Process

Michel Havet, Olivier Rouaud, M. Havet, 2009 .

Modelling coupled heat–water transfers during a decontamination treatment of the surface of solid food products by a jet of hot air. I. Sensitivity analysis of the model and first validations of product surface temperature under constant air temperature conditions

Michel Havet, Olivier Rouaud, A. M. Foster, 2006 .

Transient exergetic efficiency and moisture loss analysis of forced convection drying with and without electrohydrodynamic enhancement

Michel Havet, Olivier Rouaud, Erik Bardy, 2015 .

Effect of process parameters on the EHD airflow

Michel Havet, Sid'Ahmed Ould Ahmedou, 2009 .

Design and development of apparatus to provide repeatable surface temperature–time treatments on inoculated food samples

Judith Evans, Michel Havet, Olivier Rouaud, 2006 .

Inverse method to estimate air flow rate during free cooling using PCM-air heat exchanger

Michel Havet, A. Ousegui, B. Marcos, 2019, Applied Thermal Engineering.

Influence of the freezing condition on the baking performances of French frozen dough

Michel Havet, A. Le Bail, M. Havet, 2000 .

Conjugate Heat and Moisture Transfer During a Dynamic Thermal Treatment of Food

Michel Havet, Olivier Rouaud, Lionel Boillereaux, 2007 .

New apparatus to provide repeatable surface temperature–time treatments on inoculated food samples

Judith Evans, Michel Havet, A. M. Foster, 2006 .

Mathematical modeling of hot air/electrohydrodynamic (EHD) drying kinetics of mushroom slices

Michel Havet, Mohammad Shahedi, Nasser Hamdami, 2014 .

Numerical modeling of high pressure thawing: Application to water thawing

Michel Havet, Lionel Boillereaux, Alain Le Bail, 1997 .

Nonlinear trajectory control of high pressure thawing

Michel Havet, Lionel Boillereaux, J. M. Chourot, 1999 .