Michele Viviani

发表

A study on the numerical prediction of propellers cavitating tip vortex

Giorgio Tani, Stefano Gaggero, Michele Viviani, 2014 .

Propeller-hull interaction in a single-screw vessel

Michele Viviani, Mario Felli, Andrea Pecoraro, 2013 .

Development of an experimental device for a pod fitted with contra-rotating propellers

Luca Savio, Michele Viviani, Davide Grassi, 2009 .

Cavitation Tunnel Tests on Ducted Propellers

Daniele Bertetta, Cesare Mario Rizzo, Michele Viviani, 2012 .

A study on the influence of hull wake on model scale cavitation and noise tests for a fast twin screw vessel with inclined shaft

Diego Villa, Giorgio Tani, Michele Viviani, 2018 .

Numerical modelling of propulsion, control and ship motions in 6 degrees of freedom

Massimo Figari, Marco Altosole, Michele Martelli, 2014 .

Marine propulsion system dynamics during ship manoeuvres

Giulio Dubbioso, Marco Altosole, M. Cerruti, 2008 .

Analysis of the asymmetric behavior of propeller–rudder system of twin screw ships by CFD

Giulio Dubbioso, Andrea Di Mascio, Roberto Muscari, 2017 .

Numerical and Experimental Analysis of a CLT Propeller Cavitation Behavior

Diego Villa, Stefano Brizzolara, Daniele Bertetta, 2012, CAV 2012.

Metodologie per la Progettazione di Eliche Silenziose

Francesco Conti, Michele Viviani, Cristina Vaccaro, 2014 .

Fatigue Strength Assessment of Propellers by Means of Weakly Coupled CFD and FEM Analyses

Cesare Mario Rizzo, Stefano Gaggero, Michele Viviani, 2014 .

Numerical Prediction Of Hull Force For Low Velocity Manoeuvring

Diego Villa, Dario Bruzzone, Michele Viviani, 2014 .

Propeller modeling approaches for off–design operative conditions

Giulio Dubbioso, Diego Villa, Roberto Muscari, 2019, Ocean Engineering.

Comparison of experimental and numerical impact loads on ship-like sections

Pandeli Temarel, Stefano Brizzolara, R. Donner, 2007 .

Comparison of experimental and numerical loads on an impacting bow section

Pandeli Temarel, Stefano Brizzolara, Michele Viviani, 2008 .

Analysis of twin screw ships' asymmetric propeller behaviour by means of free running model tests

Salvatore Mauro, Giulio Dubbioso, Andrea Coraddu, 2013 .

Application of CFD Calculations for the Improvement of Planing Crafts Manoeuvrability Mathematical Models

Diego Villa, Michele Viviani, E. Ferri, 2016 .

Cavitation tunnel tests for “The Princess Royal” model propeller behind a 2-dimensional wake screen

Mehmet Atlar, Naz Yilmaz, Michele Viviani, 2019 .

An Investigation on the Discrepancies Between RANSE and BEM Approaches for the Prediction of Marine Propeller Unsteady Performances in Strongly Non-Homogeneous Wakes

Diego Villa, Stefano Gaggero, Michele Viviani, 2014 .

An improved wake description by higher order velocity statistical moments for single screw vessel

Michele Viviani, Francesco Salvatore, Mario Felli, 2015 .

Design and analysis of counter-rotating propellers-comparison of numerical and experimental results

Stefano Brizzolara, Luca Savio, Michele Viviani, 2010 .

A Practical Method for the Prediction of Planing Craft Motions in Regular and Irregular Waves

Luca Sebastiani, Paola Gualeni, Dario Bruzzone, 2008 .

Comparison of experimental and numerical sloshing loads in partially filled tanks

Pandeli Temarel, Stefano Brizzolara, Luca Savio, 2011 .

Assessment of the Manoeuvrability Characteristics of a Twin Shaft Naval Vessel Using an Open-Source CFD Code

Roberto Tonelli, Michele Viviani, Benedetto Piaggio, 2021, Journal of Marine Science and Engineering.

Experimental investigation of single blade loads by captive model tests in pure oblique flow. Part II: Propeller in-plane loads and preliminary comparison of single blade loads during transient phases

Fabrizio Ortolani, Giulio Dubbioso, Giorgio Tani, 2021 .

Z-drive escort tug manoeuvrability modelling: From model-scale to full-scale validation

Massimo Figari, Michele Martelli, Michele Viviani, 2021, Developments in Maritime Technology and Engineering.

Experimental and numerical investigations for modelling propeller cavitation noise

Tomaso Gaggero, Enrico Rizzuto, Giorgio Tani, 2014 .

Design and Construction of a Modular Pump-Jet Thruster for Autonomous Surface Vehicle Operations in Extremely Shallow Water

Gabriele Bruzzone, Marco Altosole, Angelo Odetti, 2019, Journal of Marine Science and Engineering.

Application of computer vision techniques to measure cavitation bubble volume and cavitating tip vortex diameter.

Luca Savio, Michele Viviani, Marco Ferrando, 2009 .

Simulations of a Sloshing Experiment By FEM CFD And FEM FSI Approaches

Cesare Mario Rizzo, Giorgio Tani, Michele Viviani, 2012 .

Evaluation of Slamming Loads on Ship Bow Section Adopting SPH and RANSE Method

Stefano Brizzolara, Michele Viviani, L. Savio, 2007 .

Numerical and experimental optimization of a CP propeller at different pitch settings

Stefano Brizzolara, Daniele Bertetta, Luca Savio, 2011 .

EFD and CFD Characterization of a CLT Propeller

Stefano Brizzolara, Edward Canepa, Daniele Bertetta, 2012 .

An efficient and robust approach to predict ship self-propulsion coefficients

Giuliano Vernengo, Tomaso Gaggero, Giorgio Tani, 2019, Applied Ocean Research.

Ship wake scaling and effect on propeller performances

Enrico Rizzuto, Stefano Gaggero, Michele Viviani, 2013 .