N. Grossi

发表

Idle time selection for wire-arc additive manufacturing: A finite element-based technique

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2018 .

Chatter marks generation mechanisms in peripheral milling

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2017 .

Process Parameters Optimization of Thin-Wall Machining for Wire Arc Additive Manufactured Parts

G. Campatelli, G. Venturini, A. Scippa, 2020, Applied Sciences.

Toolpath Optimization for 3-Axis Milling of Thin-Wall Components

A. Scippa, N. Grossi, L. Morelli, 2020 .

Cutting Forces Analysis in Additive Manufactured AISI H13 Alloy

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2016 .

Finite Element mesh coarsening for effective distortion prediction in Wire Arc Additive Manufacturing

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2017 .

Heat accumulation prevention in Wire-Arc-Additive-Manufacturing using air jet impingement

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2018, Manufacturing Letters.

Chatter stability prediction for high-speed milling through a novel experimental-analytical approach

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2017 .

Improved experimental-analytical approach to compute speed-varying tool-tip FRF

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

Investigation and Correction of Actual Microphone Response for Chatter Detection in Milling Operations

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

Spindle speed ramp-up test: A novel experimental approach for chatter stability detection

Ryuta Sato, Gianni Campatelli, Niccolò Grossi, 2015 .

Accurate and fast measurement of specific cutting force coefficients changing with spindle speed

Niccolò Grossi, N. Grossi, 2017 .

Speed-varying cutting force coefficient identification in milling

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

Mitigation of chatter instabilities in milling using an active fixture with a novel control strategy

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

Mitigation of chatter instabilities in milling using an active fixture with a novel control strategy

G. Innocenti, G. Campatelli, A. Scippa, 2016, The International Journal of Advanced Manufacturing Technology.

Chatter Stability Prediction in Milling Using Speed-varying Cutting Force Coefficients☆

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2014 .

Surface location error prediction in 2.5-axis peripheral milling considering tool dynamic stiffness variation

G. Campatelli, A. Scippa, N. Grossi, 2022, Precision Engineering.

On the generation of chatter marks in peripheral milling: A spectral interpretation

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2018, International Journal of Machine Tools and Manufacture.

Improved dynamic compensation for accurate cutting force measurements in milling applications

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

A frequency-based analysis of cutting force for depths of cut identification in peripheral end-milling

G. Campatelli, A. Scippa, N. Grossi, 2022, Mechanical Systems and Signal Processing.

Forces Shapes in 3-Axis End-Milling: Classification and Characteristic Equations

G. Venturini, A. Scippa, N. Grossi, 2021, Journal of Manufacturing and Materials Processing.

Two-points-based receptance coupling method for tool-tip dynamics prediction

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2017 .

Improved RCSA technique for efficient tool-tip dynamics prediction

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2016 .

Speed-varying Machine Tool Dynamics Identification Through Chatter Detection and Receptance Coupling

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2016 .

Numerical investigation of chatter suppression in milling using active fixtures in open-loop control

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2018 .

Investigating Actuation Strategies in Active Fixtures for Chatter Suppression

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2016 .

0605 Time domain simulation model for active fixturing in milling

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2015 .

ADAPTIVE TOOLPATH FOR 3-AXIS MILLING OF THIN WALLED PARTS

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2019, MM Science Journal.

Effects of different WAAM current deposition modes on the mechanical properties of AISI H13 tool steel

J. E. Mazzaferro, William Hackenhaar, G. Campatelli, 2022, Welding in the World.

FEM based cutting velocity selection for thin walled part machining

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2014 .

3D Finite Element Modeling of Holder-Tool Assembly for Stability Prediction in Milling☆

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2015 .

DEPTHS OF CUT IDENTIFICATION IN 3-AXIS MILLING USING CUTTING FORCE SPECTRUM

G. Campatelli, A. Scippa, N. Grossi, 2021, MM Science Journal.

Accurate and fast measurement of specific cutting force coefficients changing with spindle speed

N. Grossi, 2017, International Journal of Precision Engineering and Manufacturing.

Microstructural, mechanical and energy demand characterization of alternative WAAM techniques for Al-alloy parts production

L. Fratini, G. Ingarao, D. Campanella, 2020 .

Fixture Optimization in Turning Thin-Wall Components

Niccolò Grossi, Antonio Scippa, Lisa Croppi, 2019, Machines.

Identification of machine tool dynamics under operational conditions

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2016 .