S. Fedorovich

发表

Impact of liquid metal surface on plasma-surface interaction in experiments with lithium and tin capillary porous systems

G. Oost, G. Van Oost, A. Vertkov, 2020 .

Experiments with tin liquid-metal capillary porous system in the PLM device

G. Oost, G. Van Oost, D. Gerasimov, 2019, Journal of Physics: Conference Series.

Tests of tungsten divertor mock-ups of tokamak-reactor with powerful plasma and e-beam loads

A. V. Dedov, G. Oost, G. Van Oost, 2019, Journal of Physics: Conference Series.

Erosion of Fuzz Layers Formed in Steady-State Plasma Discharge

A. Sliva, G. Vasilyev, A. Karpov, 2022, Fusion Science and Technology.

Spectroscopic characterization of composite lithium materials irradiated with high-temperature plasma

N. E. Belova, A. Karpov, V. P. Budaev, 2020, Heliyon.

Stochastic nanostructure and fuzz-like structure formation on the material surface under powerful plasma load in the plasma linear multicusp device

Z. A. Zakletskii, D. Gerasimov, A. Karpov, 2020, Journal of Physics: Conference Series.

Study of the stochastic clustering on the refractory material surface under the effect of plasma load in the PLM device

Z. A. Zakletskii, G. Van Oost, A. Sliva, 2019, Journal of Physics: Conference Series.

Plasma device for material surface treatment by high-heat plasma

E. A. Kuznetsova, P. Dergachev, N. S. Sergeev, 2018, Journal of Physics: Conference Series.

Tests of refractory and high-porous metals in plasma device at National Research University MPEI

E. A. Kuznetsova, P. Dergachev, N. S. Sergeev, 2018, Journal of Physics: Conference Series.

The plasma device for the high-heat plasma testing of refractory metals and inventing of new highly porous materials

A. Karpov, Y. Martynenko, A. Lazukin, 2017 .

Tungsten melting and erosion under plasma heat load in tokamak discharges with disruptions

S. Grashin, L. Khimchenko, P. Savrukhin, 2017 .

Studying of in-vessel component materials under high power electron beam and steady-state plasma loads

A. Sliva, A. Lubenchenko, V. Dragunov, 2021, Fusion Engineering and Design.

High-heat flux tests of tungsten divertor mock-ups with steady-state plasma and e-beam

V. Budaev, A. Sliva, R. Giniyatulin, 2020 .

Investigation of the Protective Plasma-Facing Graphite In-Vessel Components of T-15MD Tokamak by Steady-State Plasma Loads in the PLM Device and by Powerful Electron Beams

Z. A. Zakletskii, S. Grashin, A. Sliva, 2021, Plasma Physics Reports.

The PLM Plasma Device for Tests of Tungsten with Powerful Stationary Heat Plasma Loads

A. Karpov, Y. Martynenko, D. Kavyrshin, 2019, Physics of Atomic Nuclei.

The heat exchange reduction of tungsten “fuzz” surface irradiated with helium plasma in the PLM device

Z. A. Zakletskii, D. Gerasimov, A. Karpov, 2019, Journal of Physics: Conference Series.

Growth of nanostructured highly porous surface on refractory metals under plasma treatment in the PLM device

G. Van Oost, D. Gerasimov, A. Karpov, 2019, Journal of Physics: Conference Series.

Formation of titanium highly porous nanostructured surface under plasma irradiation in the PLM device

A. Karpov, Y. Martynenko, V. P. Budaev, 2019, Journal of Physics: Conference Series.

Lithium deposits from the T-10 tokamak after experiments with lithium capillary-porous system

G. Van Oost, S. Grashin, L. Khimchenko, 2019, Journal of Physics: Conference Series.

PLASMA DEVICE AT NRU «MPEI» FOR TESTING OF REFRACTORY METALS AND CREATION OF HIGHLY POROUS MATERIALS OF NEW GENERATION

A. Karpov, Y. Martynenko, A. Lazukin, 2017 .

Study of Nb/Al Interface Combining Spectroscopy of Reflected Electrons with Ion Sputtering

M. Norell, V. Afanas’ev, A. Pavolotsky, 2008 .

Spatial distributions of sputtered particles under ion bombardment of polycrystals

E. S. Mashkova, V. Molchanov, S. Fedorovich, 1988 .

Reflection of keV-energy electrons from multilayer surfaces

V. Afanas’ev, A. Lubenchenko, S. Fedorovich, 2002 .

Kilovolt electron backscattering

A. Lubenchenko, V. Afanas’ev, S. Fedorovich, 1994 .

Effect of Coating by a Carbon Nanostructure on Heat Transfer with Unsteady Film Boiling

A. V. Dedov, A. Sliva, V. Yagov, 2019, High Temperature.

Influence of carbon coating and oxide layer on film boiling regime

A. V. Dedov, A. Sliva, M. Vinogradov, 2018 .

Enhancement of critical heat fluxes at pool boiling on structured surfaces

S. Fedorovich, A. Dedov, I. A. Khaziev, 2020, Journal of Physics: Conference Series.

RF-heating system of helicon-type for PLM-2 plasma device: design parameters

V. A. Iachuk, V. P. Budaev, S. Fedorovich, 2020, Journal of Physics: Conference Series.

Depth Profiling Using Reflected Electron Spectroscopy

V. Afanas’ev, S. Fedorovich, A. Gryazev, 2018, Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques.

The effect of applied voltage frequency on surface dielectric barrier discharge energy

D. Kavyrshin, S. Krivov, A. Nikitin, 2016 .

Test of liquid metal lithium capillary-porous system with stationary plasma in PLM device

G. Van Oost, D. Gerasimov, A. Karpov, 2020, Journal of Physics: Conference Series.

Optimization of Steel-Surface Hardening by Carbon Nanostructures Followed by Treatment with High-Intensity Energy Sources

A. Eletskii, A. Sliva, O. Zilova, 2018, Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques.

Mechanism of Surface Reinforcement of Steels by Nanocarbon Materials Using Laser Heating

O. Zilova, A. Eletskii, G. S. Bocharov, 2018, Physics of Metals and Metallography.

Laser reinforcement of a steel surface by partially reduced graphene oxide

A. Uvarov, A. Eletskii, G. S. Bocharov, 2018 .

Nanocarbon coating on the basis of partially reduced graphene oxide

A. Eletskii, G. S. Bocharov, V. P. Budaev, 2017 .

Optical Emission Spectroscopy for Studying of Region of Interaction between a Plasma Flow and a Tungsten Sample

A. Karpov, D. Kavyrshin, V. Chinnov, 2022, Physics of Atomic Nuclei.

Studying in-vessel component materials under heat and plasma loads relevant to fusion installations

A. V. Dedov, V. Budaev, A. Karpov, 2020, Journal of Physics: Conference Series.