Paul C. Ivey

发表

Accelerating the Calibration of Multi-Hole Pressure Probes by Applying Advanced Computational Methods

Arnoud Franken, Paul C. Ivey, 2004 .

A Fractional-Factorial Investigation of the Design Parameters Affecting the Performance of a Pyrometer Purge Air System

Paul C. Ivey, Clive Kerr, 2003 .

Experimental audit of the mixing-plane approach to turbomachinery analysis and a review of alternative multi-row techniques

Paul C. Ivey, C. Lockwood, R. G. Wells, 2000 .

Closure to “Discussion of ‘Endwall Effects at Two Tip Clearances in a Multistage Axial Flow Compressor With Controlled Diffusion Blading’” (1994, ASME J. Turbomach., 116, pp. 645–646)

Paul C. Ivey, J. P. Barton, M. A. Howard, 1994 .

The Influence of Compressor Aerodynamics on Pressure Probes: Part I — In Rig Calibrations

Paul C. Ivey, Simon Coldrick, R. G. Wells, 2004 .

The Engineering Doctorate — An ‘Enhanced’ Doctoral Programme for Engineers Incorporating Business Decision-Making Skills: A Gas-Turbine Engineering Perspective

M. L. Sanderson, Paul C. Ivey, Vivien Morris, 2000 .

The Influence of Compressor Aerodynamics on Pressure Probes: Part 2 — Numerical Models

Paul C. Ivey, Simon Coldrick, R. G. Wells, 2004 .

Considerations for Using 3-D Pneumatic Probes in High-Speed Axial Compressors

Paul C. Ivey, Simon Coldrick, R. G. Wells, 2003 .

The Engineering Doctorate model of consultant/researcher/innovator/entrepreneur for new product development—a gas turbine instrumentation case study

Paul C. Ivey, C. I. Kerr, 2003 .

Enhancing Flow Field Measurements Through Adaptive Multi-Dimensional Data Sampling

Arnoud Franken, Paul C. Ivey, 2005 .

Performance and Stability Enhancement of NASA Rotor 37 Applying Abradable Coating

Paul C. Ivey, Kaveh Ghorbanian, Behnam H. Beheshti, 2005 .

The Measurement of Turbomachinery Blade Vibration Through Tip Timing With Capacitance Tip Clearance Probes

Craig Lawson, Paul C. Ivey, 2004 .

REDUCING AERO-ENGINE DEVELOPMENT TIME AND COSTS BY USING ARTIFICIAL INTELLIGENCE

Arnoud Franken, Paul C. Ivey, 2002 .

Optical fouling of the RB199 pyrometer

Paul C. Ivey, Clive Kerr, 2003 .

The Design and Calibration of a Heat-Fluxmeter for Gas Turbine Studies

Paul C. Ivey, 1994 .

Numerical Modelling of Three Dimensional Honeycomb Labyrinth Seals Employing a Simplified Approach

Paul C. Ivey, Joao A. Teixeira, Dermot Collins, 2006 .

Compressor Blade Tip Timing Using Capacitance Tip Clearance Probes

Craig Lawson, Paul C. Ivey, 2003 .

3D LASER TRANSIT MEASUREMENTS OF THE TIP CLEARANCE VORTEX IN A COMPRESSOR ROTOR BLADE ROW

Paul C. Ivey, Andrew C. Foley, 1996 .

A strategic review of the large civil aeroengine market and the paradigm shift to a service-

Paul C. Ivey, Clive Kerr, P. Ivey, 2001, The Aeronautical Journal (1968).

A Review of Purge Air Designs for Aeroengine Based Optical Pyrometers

Paul C. Ivey, Clive Kerr, 2001 .

A High-Temperature Assessment of Air-Cooled Unsteady Pressure Transducers

Paul C. Ivey, Derek G. Ferguson, 1998 .

THE APPLICATION OF A NEW RESEARCH AND DEVELOPMENT PROJECT SELECTION MODEL IN SMES

Craig Lawson, Paul C. Ivey, Philip J. Longhurst, 2006 .

Exploratory Design Modifications For Enhancing Pyrometer Purge Air System Performance

Paul C. Ivey, Clive Kerr, 2004 .

Computational Comparison of the RB199 and GE90 Pyrometer Purging Systems

Paul C. Ivey, Clive Kerr, Neil Oxley, 2002 .

Enhancing Flow Field Measurements Through Adaptive Multidimensional Data Sampling

Arnoud Franken, Paul C. Ivey, 2006 .

Competitively driven gas turbine instrumentation technology development-a framework for engineering managers

Paul C. Ivey, Clive Kerr, 2002, IEEE International Engineering Management Conference.

Investigation of Wedge Probe Wall Proximity Effects: Part 2—Numerical and Analytical Modeling

Paul C. Ivey, Peter D. Smout, P. Ivey, 1997 .

A Review of Purge Air Designs for Aeroengine-Based Optical Pyrometers

Paul C. Ivey, Clive Kerr, 2002 .

A High Temperature Assessment of Air-Cooled Unsteady Pressure Transducers

Paul C. Ivey, Derek G. Ferguson, 1997 .

Optical pyrometry for gas turbine aeroengines

Paul C. Ivey, Clive Kerr, P. Ivey, 2004 .

Accelerating the Calibration of Multihole Pressure Probes by Applying Advanced Computational Methods

Arnoud Franken, Paul C. Ivey, A. Franken, 2005 .

The formation of the European Virtual Institute for Gas Turbine Instrumentation (EVI-GTI)

Paul C. Ivey, A.R.C. Franken, 2002, IEEE International Engineering Management Conference.

Performance enhancement in transonic axial compressors using blade tip injection coupled with casing treatment

Paul C. Ivey, Kaveh Ghorbanian, Behnam H. Beheshti, 2005 .

Parametric Study of Tip Clearance—Casing Treatment on Performance and Stability of a Transonic Axial Compressor

Paul C. Ivey, Kaveh Ghorbanian, Behnam H. Beheshti, 2004 .

An Air-Cooled Jacket Designed to Protect Unsteady Pressure Transducers at Elevated Temperatures in Gas Turbine Engines

Paul C. Ivey, Derek G. Ferguson, 2002 .

The Transfer of Heat by Self-Induced Flow in a Rotating Tube

Paul C. Ivey, S. Gilham, J. M. Owen, 1992 .

Investigation of Wedge Probe Wall Proximity Effects: Part 2 — Numerical and Analytical Modelling

Paul C. Ivey, Peter D. Smout, P. Ivey, 1996 .

An R&D options selection model for investment decisions

Paul C. Ivey, Philip J. Longhurst, Simon Coldrick, 2005 .

A decision framework for R&D project selection

Craig Lawson, Paul C. Ivey, S. Coldrick, 2002, IEEE International Engineering Management Conference.

Tip timing techniques for turbomachinery HCF condition monitoring

Craig Lawson, Paul C. Ivey, K. R. Grant, 2002 .

Errata: A strategic review of the large civil aeroengine market and the paradigm shift to a service-oriented environment

Paul C. Ivey, Clive Kerr, P. Ivey, 2001 .

Endwall Effects at Two Tip Clearances in a Multistage Axial Flow Compressor With Controlled Diffusion Blading

Paul C. Ivey, M. A. Howard, K. F. Young, 1994 .

An overview of the measurement errors associated with gas turbine aeroengine pyrometer systems

Paul C. Ivey, Clive Kerr, P. Ivey, 2002 .

The Use of Commercially Available Capacitance Tip-Clearance Probes for Tip-Timing of Aero-Engine Compressor Blades

Craig Lawson, Paul C. Ivey, 2002 .

Analysis and experimental aspects of the impact of supercooled water droplets into thin water films

Paul C. Ivey, Richard Purvis, David W. Hammond, 2005 .

Endwall Effects at Two Tip Clearances in a Multistage Axial Flow Compressor With Controlled Diffusion Blading

Paul C. Ivey, M. A. Howard, K. F. Young, 1993 .

Measurement of Tip-Clearance Flow in a Multistage, Axial Flow Compressor

Paul C. Ivey, Andrew C. Foley, P. Ivey, 1996 .

Numerical Predictions For The Performance Of Pyrometer Purge Air Systems

Paul C. Ivey, Clive Kerr, 2003 .

Tubomachinery blade vibration amplitude measurement through tip timing with capacitance tip clearanc

Craig Lawson, Paul C. Ivey, P. Ivey, 2005 .

Investigation of Wedge Probe Wall Proximity Effects: Part 1—Experimental Study

Paul C. Ivey, Peter D. Smout, 1997 .

Considerations for Using 3D Pneumatic Probes in High Speed Axial Compressors

Paul C. Ivey, R. G. Wells, Simon Coldrick, 2002 .