Jiang Li

发表

Torque transducer based on fiber Bragg grating

Tao Li, Shu Jiang, Jiang Li, 2016, SPIE/COS Photonics Asia.

Study and application of 25kA Hall sensor in EAST toroidal power supply

Jiang Li, 2010 .

Optimization Design for a High Voltage DC Power Supply Module Based on PSM Technology

Gao Ge, Jiang Li, Wang Min, 2014 .

Flux vector modulation strategy for a four-switch three-phase inverter for motor drive applications

Jiang Li, D.T.W. Liang, 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

A STUDY ON THE CALCULATION OF RELIABLE WEAR RESISTANCE LIFE OF AUTOMOBILE DIESEL ENGINE

Jiang Li, 2000 .

Fabrication and characteristic of a multicore fiber for high power laser delivery

Peiguang Yan, Jiang Li, Su Chen, 2012, LASE.

Numerical investigation of combustion field of hypervelocity scramjet engine

Rui Xue, Jiang Li, Zhiwei Huang, 2016 .

Experimental and analytical studies on the vibration serviceability of pre-stressed cable RC truss floor systems

Jiang Li, Xuhong Zhou, Jiepeng Liu, 2016 .

The measurement of the asynchronous oscillation of a cavitation bubble

Jiang Li, 2011 .

Technology and Performance of Brush Plating Al/Cu Composite Coatings

Jiang Li, 2012 .

2.5Gb/s 16:1 Multiplexer Circuit Design

Jiang Li, 2008 .

Vibration serviceability of pre-stressed concrete floor system under human activity

Jiang Li, Xuhong Zhou, Jiepeng Liu, 2017 .

Photonic crystal fiber based modal interferometer for refractive index sensing

Jiang Li, Huifeng Wei, Wei Huang, 2014, Other Conferences.

On the method of detecting the leaky magnetic flux from the inside-wall of the steel tube

Jiang Li, 2003 .

Fabrication of microstructures by rear-side picosecond laser irradiation of two-layer PMMA

Aifei Pan, Wenjun Wang, Xuesong Mei, 2018, Photonics Europe.

Structual and optical performance of Pd/B4C working from 7.5nm to 12nm

Zhanshan Wang, Jiang Li, Qiushi Huang, 2015, SPIE Optical Systems Design.

Recognizing and Suppressing Ground Roll Wave with Average Energy Method

Jiang Li, 2005 .

Low On-Voltage Operation GaN Based Field Effect Schottky Barrier Diode(Session A7 High Power Devices)(2004 Asia-Pacific Workshop on Fundamentals and Application of Advanced Semiconductor Devices (AWAD 2004))

Jiang Li, Takahiro Wada, Hironari Takehara, 2004 .

Interlaminar Stress Analysis of Smart Composite Laminates under Electrical Bending Load

Bin Huang, Jiang Li, Heung Soo Kim, 2015 .

Silicon-plus photonics for light manipulation and photodetection

Jiang Li, Daoxin Dai, Yanlong Yin, 2018, SPIE/COS Photonics Asia.

The Quantitative Forecast and Suppression on the Electromagnetic Radiation from Low Voltage Frequency Converter

Jiang Li, Jian Ru Wan, Cheng Hai Gao, 2014 .

A High Yield Manufacturable BiFET Epitaxial Profile and Process for High Volume Production

Jiang Li, C. Cismaru, V. Ho, 2006 .

Study to Noise Control For Centrifugal Ventilator

Jiang Li, 2005 .

Dynamic Performance Characteristics of Pre-Stressed Cable RC Truss Floor System under Human-Induced Loads

Jiang Li, Xuhong Zhou, Jiepeng Liu, 2017 .

The CMOS Design of Frequency Divider Based on Similar-Johnson Counter

Jiang Li, 2009 .

A novel numerical module for an analog low-pass signal filter

Min Wang, Qiang Xu, Zhenhua Li, 2013 .

Soft Soil Improvement by the Controlled Loading Blasting Replacement Method and Its Engineering Applications

Jiang Li, 2011 .

A Method of Open- loop Pitch Detection for AVS-P10 Codec

Jiang Li, 2014 .

Vibration Behavior of Prestressed Cable Reinforced Concrete Truss System Caused by Jumping and Hopping

Jiang Li, Xuhong Zhou, Jiepeng Liu, 2017 .

Application of Macro-program on CNC Machining

Jiang Li, 2005 .

Heat Flux Measurement Method of Two-Phase Flow in SRM

Jiang Li, Guo Qiang He, Xiang Yu Zhang, 2012 .

Calculation of Wall Thickness for Circular Steel Silo and Discussions

Jiang Li, 2013 .

Modal analysis of floating caliper brake system elements

Jiang Li, 2006 .

New Technology for Raising the Production in Injecting Steam Well by Using SEPA

Jiang Li, Guosheng Liu, Jianjun Xie, 2006 .

Experimental and numerical studies on the vibration serviceability of fanshaped prestressed concrete floor

Jiang Li, Liang Cao, Hongtuo Qi, 2018, Int. J. Distributed Sens. Networks.

Control of High Pressure Polyethylene Product Quality and Reduce Substandard Products

Jiang Li, 2011 .

Vibration of Prestressed Cable RC Truss Floor System due to Human Activity

Jiang Li, Xuhong Zhou, Jiepeng Liu, 2016 .

Study and Comparison of Speckle Noise Suppressing Algorithms

Jiang Li, 2002 .

Torque sensor based on time-to-digital converter

Jiang Li, 2008 .

Forecasting Control Regression Model of Oil and Gas Delivery Temperature Based on the Electric Heater

Jiang Li, 2012 .

Using Proportional Solidification Theory and Kiss Gating/Connor Feeder to Improve Foundry Method of Main Roller

Jiang Li, 2001 .

Acceleration Response of Prestressed Cable RC Truss Floor System Subjected to Heel-Drop Loading

Jiang Li, Liang Cao, Xuhong Zhou, 2016 .

A high-speed and high-resolution CMOS comparator with three-stage preamplifier

Jiang Li, Xu Weisheng, Yu Youling, 2010 .

Design of Ethernet-based technique in electric telemonitoring system of ship

Jiang Li, 2006 .

The influence to flame retardance characteristics of flame retardant painting by microencapsulation flame retardant

Jiang Li, 2011 .

Diffuse reflection measurements determining optical properties of tissues

Jiang Li, Jinpin Ying, Wei Sun, 1992, Photonics West - Lasers and Applications in Science and Engineering.

Polyp height and width measurement using topographic height map

Jiang Li, Jianhua Yao, Ronald Summers, 2008, SPIE Medical Imaging.

All optically-controlled multifunctional VO2 memory device for terahertz waves

Jiang Li, Zhao-Hui Zhai, Hong-Kuan Yuan, 2020, International Conference on Optical Instruments and Technology.

Absolute Roughness of Trunk Natural Gas Transmission Pipeline with Mechanics Properties and Material Properties

Ying Zhou, Jiang Li, Feng Chen, 2012 .

Composite YAG/Nd:YAG transparent ceramics for high-power lasers

Jiang Li, Qiang Liu, Yanping Zeng, 2012, Other Conferences.

The Rectification on the Tilt of the Prestressed Concrete Pipe Pile and the Treatment of Crack in the Crooked Pile

Jiang Li, 2011 .

Manufacture of the Reverse Roller of Φ840 mm Automatic Pipe Mill

Jiang Li, 2006 .

Technological Improvement and Optimized Die Design for Shield Case

Jiang Li, 2005 .

The Experimental Study of the Plateau Performance of the F6L913 Diesel Engine

Jiang Li, Weiming Zhang, 2013 .

Coherent supercontinuum in a silicate glass composite fiber with all-normal dispersion

Xia Li, Tonglei Cheng, Yasutake Ohishi, 2017, OPTO.

Application of Nanophase Materials in Explosives

Jiang Li, 2007 .

FEM Analysis on Thermal Stress of Desulphurization Injection Lance

Jiang Li, Yong Huang, Nan Li, 2007 .

Compound Brake Design Based on Ideal Braking Force Distribution Line

Jiang Li, 2006 .