Mangirdas Malinauskas

发表

Hybrid laser 3D microprocessing in glass/polymer micromechanical sensor: towards chemical sensing applications

Titas Tičkūnas, Mangirdas Malinauskas, Roaldas Gadonas, 2018, Photonics Europe.

The optical damage threshold of 3D nanolithography produced microstructures under intense femtosecond irradiation

Mangirdas Malinauskas, Linas Jonušauskas, Laurynas Čekanavičius, 2018, OPTO.

Hybrid subtractive-additive-welding microfabrication for lab-on-chip applications via single amplified femtosecond laser source

Saulius Juodkazis, Mangirdas Malinauskas, Roaldas Gadonas, 2017 .

Augmentation of direct laser writing fabrication throughput for three-dimensional structures by varying focusing conditions

Mangirdas Malinauskas, Linas Jonušauskas, Sima Rekštyte, 2014 .

Femtosecond laser-induced two-photon photopolymerization for structuring of micro-optical and photonic devices

Mangirdas Malinauskas, Roaldas Gadonas, M. Rutkauskas, 2009, Microtechnologies.

Enhanced cavity-waveguide interaction in three-dimensional photonic crystals

Saulius Juodkazis, Kestutis Staliunas, Mangirdas Malinauskas, 2017, OPTO.

Laser-induced damage in photopolymers thin films with ultrashort pulses

Mangirdas Malinauskas, Andrius Melninkaitis, Albertas Žukauskas, 2014, Photonics Europe.

Laser nanolithography and chemical metalization for the manufacturing of 3D metallic interconnects

Mangirdas Malinauskas, Sima Rekštytė, Tomas Jonavičius, 2014, Photonics West - Lasers and Applications in Science and Engineering.

Fabrication of 3D micro-structured scaffolds by direct laser writing in pre-polymers for in vitro and in vivo studies

Mangirdas Malinauskas, Sima Rekštytė, Justinas Mačiulaitis, 2017, LASE.

Characterization of tissue engineered cartilage products: Recent developments in advanced therapy.

Mangirdas Malinauskas, Sima Rekštytė, Virginija Jankauskaitė, 2016, Pharmacological research.

Upconverting nanocrystals as luminescent temperature probes for local-heating imaging during direct laser writing 3D nanolithography

Mangirdas Malinauskas, Simonas Varapnickas, Dovilė Baziulytė-Paulavičienė, 2018, Micro + Nano Materials, Devices, and Applications.

Mesoscale 3D manufacturing: varying focusing conditions for efficient direct laser writing of polymers

Mangirdas Malinauskas, Linas Jonušauskas, M. Malinauskas, 2014, Photonics Europe.

Combination of thermal extrusion printing and ultrafast laser fabrication for the manufacturing of 3D composite scaffolds

Mangirdas Malinauskas, Domas Paipulas, Sima Rekštytė, 2014, Photonics West - Lasers and Applications in Science and Engineering.

Mesoscale ultrafast laser 3D lithography: throughput in voxels-per-second

Saulius Juodkazis, Mangirdas Malinauskas, Darius Gailevičius, 2018, Photonics Europe.

Femtosecond laser fabrication of hybrid micro-optical elements and their integration on the fiber tip

Saulius Juodkazis, Mangirdas Malinauskas, Roaldas Gadonas, 2010, Photonics Europe.

Fabrication of 3D glass-ceramic micro- /nano-structures by direct laser writing lithography and pyrolysis

Saulius Juodkazis, Kestutis Staliunas, Mangirdas Malinauskas, 2018, OPTO.

3D opto-structuring of ceramics at nanoscale

Saulius Juodkazis, Kestutis Staliunas, Tomas Katkus, 2018, Photonics Europe.

Lithographic microfabrication of biocompatible polymers for tissue engineering and lab-on-a-chip applications

Mangirdas Malinauskas, Roaldas Gadonas, Evaldas Balciunas, 2012, Photonics Europe.

Which period ripples will form on the ablated surface: subwavelength or deep-subwavelength?

Saulius Juodkazis, Tomas Katkus, Stefan Lundgaard, 2018, LASE.

Fabrication of flexible microporous 3D scaffolds via stereolithography and optimization of their biocompatibility

Mangirdas Malinauskas, Linas Jonušauskas, Evaldas Balčiūnas, 2018, OPTO.

Single-step direct laser fabrication of complex shaped microoptical components

Mangirdas Malinauskas, Roaldas Gadonas, Andrius Melninkaitis, 2012, Photonics Europe.

Plasmonically enhanced 3D laser lithography for high-throughput nanoprecision fabrication

Mangirdas Malinauskas, Gabrielius Rimšelis, Linas Jonušauskas, 2017, LASE.

Polarization effects in 3D femtosecond direct laser writing nanolithography

Saulius Juodkazis, Mangirdas Malinauskas, Etienne Brasselet, 2018, Photonics Europe.

3D Microporous Scaffolds Manufactured via Fused Filament Fabrication combined with Direct Laser Writing Ablation and Polymerization

Mangirdas Malinauskas, M. Malinauskas, 2014, BioMed 2014.

Direct laser writing of 3D micro/nanostructures on opaque surfaces

Mangirdas Malinauskas, Albertas Žukauskas, Yuri Gordienko, 2012, Photonics Europe.

Laser nanolithography and pyrolysis of SZ2080 hybrid for slowing light in 3D photonic crystals

Saulius Juodkazis, Kestutis Staliunas, Mangirdas Malinauskas, 2017, OPTO.

Photosensitive naturally derived resins toward optical 3-D printing

Mangirdas Malinauskas, Linas Jonušauskas, Jolita Ostrauskaite, 2018 .

Femtosecond laser induced damage threshold (LIDT) of 3D nanolithography made micro- and nano-optical elements

Mangirdas Malinauskas, Darius Gailevičius, Linas Jonušauskas, 2019, LASE.

Direct laser writing of optical field concentrators based on chirped three-dimensional photonic crystals

Saulius Juodkazis, Kestutis Staliunas, Mangirdas Malinauskas, 2020, OPTO.

Graphene on silicon-nitride photodetector

Kestutis Staliunas, David J. Moss, Tomas Katkus, 2019, Micro + Nano Materials, Devices, and Applications.

Three-dimensional nanostructuring of polymer materials by controlled avalanche using femtosecond laser pulses

Saulius Juodkazis, Mangirdas Malinauskas, Sima Rekštytė, 2014, Photonics West - Lasers and Applications in Science and Engineering.

Laser subtractive-additive-welding microfabrication for Lab-On-Chip (LOC) applications

Saulius Juodkazis, Mangirdas Malinauskas, Roaldas Gadonas, 2017, OPTO.

Bioresists from renewable resources as sustainable photoresins for 3D laser microlithography: material synthesis, cross-linking rate and characterization of the structures

Mangirdas Malinauskas, Linas Jonušauskas, Sima Rekštytė, 2017, OPTO.

Thermal and optical properties of sol-gel and SU-8 resists

Saulius Juodkazis, Mangirdas Malinauskas, Domas Paipulas, 2012, Other Conferences.

Woodpile photonic crystal for beam collimation

Saulius Juodkazis, Kestutis Staliunas, Mangirdas Malinauskas, 2012, Photonics Europe.

Graphene bolometer for vis-IR spectral range made on nano-SiN membrane

Saulius Juodkazis, David J. Moss, Tomas Katkus, 2018, OPTO.

Solvent induced reversible deformations of polymeric 3D microstructures for actuation and sensing applications

Mangirdas Malinauskas, Domas Paipulas, Vygantas Mizeikis, 2018, LASE.

Multiscale 3D manufacturing: combining thermal extrusion printing with additive and subtractive direct laser writing

Mangirdas Malinauskas, Domas Paipulas, Sima Rekštytė, 2014, Photonics Europe.

Methods and challenges in laser-induced damage threshold evaluation of volumetric photopolymerized micro-structures

Mangirdas Malinauskas, Laurynas Čekanavičius, Linas Jonušauskas, 2018, Photonics Europe.

Synchronization of linear stages and galvo-scanners for efficient direct laser fabrication of polymeric 3D meso-scale structures

Saulius Juodkazis, Mangirdas Malinauskas, Darius Gailevičius, 2018, LASE.

Tailoring bulk mechanical properties of 3D printed objects of polylactic acid varying internal micro-architecture

Mangirdas Malinauskas, Andžela Šešok, Linas Jonušauskas, 2015, Europe Optics + Optoelectronics.

A universal bio-based resin for a multi-platform and meso-scale optical 3D printing

Mangirdas Malinauskas, Jolita Ostrauskaite, Sima Rekstyte, 2021 .

Direct laser writing of microoptical structures using a Ge-containing hybrid material

Stavros Pissadakis, Costas Fotakis, Mangirdas Malinauskas, 2011 .

Large Scale Laser Two‐Photon Polymerization Structuring for Fabrication of Artificial Polymeric Scaffolds for Regenerative Medicine

Mangirdas Malinauskas, Domas Paipulas, Albertas Žukauskas, 2010 .

Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses.

Saulius Juodkazis, Mangirdas Malinauskas, Roaldas Gadonas, 2010, Optics express.

Femtosecond visible light induced two-photon photopolymerization for 3D micro/nanostructuring in photoresists and photopolymers

Mangirdas Malinauskas, M. Rutkauskas, Vytautas Purlys, 2010 .

Fabrication of a composite of nanocrystalline carbonated hydroxyapatite (cHAP) with polylactic acid (PLA) and its surface topographical structuring with direct laser writing (DLW)

Mangirdas Malinauskas, Linas Jonušauskas, Aivaras Kareiva, 2016 .

3D printed polarizing grids for IR-THz synchrotron radiation

Saulius Juodkazis, Mangirdas Malinauskas, Junko Morikawa, 2018 .

3D microoptical elements formed in a photostructurable germanium silicate by direct laser writing

Stavros Pissadakis, Costas Fotakis, Mangirdas Malinauskas, 2012 .

Polylactic acid-nanocrystalline carbonated hydroxyapatite (PLA-cHAP) composite: preparation and surface topographical structuring with direct laser writing (DLW)

Mangirdas Malinauskas, Aivaras Kareiva, Zivile Stankeviciute, 2016, 1605.00777.

Laser 3D micro/nanofabrication of polymers for tissue engineering applications

Mangirdas Malinauskas, Algis S. Piskarskas, Sima Rekštytė, 2013 .

Three-dimensional laser micro-sculpturing of silicone: towards bio-compatible scaffolds.

Saulius Juodkazis, Mangirdas Malinauskas, Sima Rekštytė, 2013, Optics express.

Self-polymerization of nano-fibres and nano-membranes induced by two-photon absorption

Mangirdas Malinauskas, Domas Paipulas, M. Rutkauskas, 2010 .

Preclinical study of SZ2080 material 3D microstructured scaffolds for cartilage tissue engineering made by femtosecond direct laser writing lithography

Mangirdas Malinauskas, Sima Rekštytė, Justinas Mačiulaitis, 2015, Biofabrication.

Tuning the refractive index in 3D direct laser writing lithography: towards GRIN microoptics

Mangirdas Malinauskas, Domas Paipulas, Albertas Žukauskas, 2015 .

Diffraction grating fabrication in lithium niobate and KDP crystals with femtosecond laser pulses

Mangirdas Malinauskas, Domas Paipulas, Valdas Sirutkaitis, 2011 .

Fabrication of Scaffolds and Micro-Lenses Array in a Negative Photopolymer SZ2080 by Multi-Photon Polymerization and Four-Femtosecond-Beam Interference

Mangirdas Malinauskas, Evaldas Stankevičius, Gediminas Račiukaitis, 2011 .

Nano-groove and 3D fabrication by controlled avalanche using femtosecond laser pulses

Saulius Juodkazis, Mangirdas Malinauskas, Ričardas Buividas, 2013 .

Synthesis, Characterization and 3D Micro-Structuring via 2-Photon Polymerization of Poly(glycerol sebacate)-Methacrylate–An Elastomeric Degradable Polymer

Mangirdas Malinauskas, Sima Rekštytė, Robert Owen, 2018, Front. Phys..

Fabrication of micro-tube arrays in photopolymer SZ2080 by using three different methods of a direct laser polymerization technique

Mangirdas Malinauskas, Valerijus Smilgevicius, Evaldas Stankevičius, 2012 .

Black silicon: substrate for laser 3D micro/nano-polymerization.

Saulius Juodkazis, Mangirdas Malinauskas, Albertas Žukauskas, 2013, Optics express.

Plasmon assisted 3D microstructuring of gold nanoparticle-doped polymers

Bilal Gökce, Stephan Barcikowski, Aleksandr Ovsianikov, 2016, Nanotechnology.

In vitro and in vivo biocompatibility study on laser 3D microstructurable polymers

Mangirdas Malinauskas, Vytautas Purlys, Roaldas Gadonas, 2012 .

Effect of the photoinitiator presence and exposure conditions on laser-induced damage threshold of ORMOSIL (SZ2080)

Mangirdas Malinauskas, Andrius Melninkaitis, Albertas Žukauskas, 2015 .

Direct laser writing of 3D polymer micro/nanostructures on metallic surfaces

Mangirdas Malinauskas, Albertas Žukauskas, Vytautas Purlys, 2013 .

MICROFABRICATION OF 3D METALLIC INTERCONNECTS VIA DIRECT LASER WRITING AND CHEMICAL METALLIZATION

Mangirdas Malinauskas, Sima Rekštytė, Tomas Jonavičius, 2014 .

Closely packed hexagonal conical microlens array fabricated by direct laser photopolymerization.

Carsten Reinhardt, Mangirdas Malinauskas, Albertas Žukauskas, 2012, Applied optics.

Laser fabrication of various polymer microoptical components

Mangirdas Malinauskas, Albertas Žukauskas, Kastytis Belazaras, 2012 .

Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering.

Mangirdas Malinauskas, Roaldas Gadonas, Sima Rekstyte, 2012, Journal of biomedical optics.

A femtosecond laser-induced two-photon photopolymerization technique for structuring microlenses

Mangirdas Malinauskas, Domas Paipulas, Albertas Žukauskas, 2010 .

CUSTOM ON DEMAND 3D PRINTING OF FUNCTIONAL MICROSTRUCTURES

Mangirdas Malinauskas, Simas Butkus, Linas Jonušauskas, 2015 .

Direct laser fabrication of composite material 3D microstructured scaffolds

Mangirdas Malinauskas, Roaldas Gadonas, Sima Rekstyte, 2013 .

Nanophotonic lithography: a versatile tool for manufacturing functional three-dimensional micro-/nano-objects

Mangirdas Malinauskas, Albertas Žukauskas, Sima Rekštytė, 2012 .

3D artificial polymeric scaffolds for stem cell growth fabricated by femtosecond laser

Mangirdas Malinauskas, Domas Paipulas, Albertas Žukauskas, 2010 .

Direct Laser Fabrication of Polymeric Implants for Cardiovascular Surgery

Mangirdas Malinauskas, Sima Rekštytė, Roaldas Gadonas, 2012 .

Monolithic generators of pseudo-nondiffracting optical vortex beams at the microscale

Mangirdas Malinauskas, Etienne Brasselet, Albertas Žukauskas, 2013 .

Direct laser writing of microstructures on optically opaque and reflective surfaces

Mangirdas Malinauskas, Sima Rekštytė, Tomas Jonavičius, 2014 .

Photopolymerized microscopic vortex beam generators: Precise delivery of optical orbital angular momentum

Saulius Juodkazis, Mangirdas Malinauskas, Etienne Brasselet, 2010 .

Ultrafast laser processing of materials: from science to industry

Saulius Juodkazis, Mangirdas Malinauskas, Yoshio Hayasaki, 2016, Light: Science & Applications.

Spatial filtering by chirped photonic crystals

Mangirdas Malinauskas, M. Peckus, K. Staliunas, 2013 .