Zhang Ji

发表

Research on Multi-objective Optimization Power Dispatch Based on Carbon Emissions and its Application

Zhang Ji, 2013 .

NUMERICAL STUDY ON DEEP CAVITY HOLLOW CYLINDRICAL ROLLER BEARING FOR CONE BIT

Zhang Ji, 2014 .

Prediction Model of Alumina Powder Flow Based on KPCA and LSSVM

Zhang Ji, 2013 .

Evidence Theory-Based Approach to Sensors Multiple Fault Diagnosis

Ma Yong-guang, Zhang Ji, Wang Bing-shu, 2006, 2006 International Conference on Computational Intelligence and Security.

Gray recognition method for prediction of single well flow unit

Zhang Ji, Zhang Ji, 2005 .

Automatic density measurement of yarn dyed woven fabrics based on dual-side scanning

Zhang Ji, 2014 .

Research on System of MineVentilator Monitoring Based on DSP

Zhang Ji, 2013 .

Research of Embedded Android System Boot-up

Zhang Ji, 2011 .

The Features of the Professional Costume Designing in China,the Existing Problems and Solutions

Zhang Ji, 2001 .

Effects of Nickel on Dissolution of Lamellar Microstructure of TiAl Alloys

Zhang Ji, 2000 .

Gas extraction methods and optimization principles in Yangquan Mining Area

Zhang Ji, 2001 .

Talking about Linear Design of Longisection of Superhighway in Plain Area

Zhang Ji, 2003 .

After-installation test of 35 kV XLPE cables and the application of test termination

Zhang Ji, 2003 .

RESEARCH ON THE LARGE-ANGLE MANEUVER OF THE FLEXIBLE SOLAR SAIL SPACECRAFT

Zhang Ji, 2014 .

Several problems in the development of the paper industry of Zhejiang Province during the tenth five-year-plan

Zhang Ji, 2001 .

Development of Communications Software for Ultrasonic Open-Channel Flowmeter Monitor System

Zhang Ji, 2001 .

Highway life-cycle cost analysis with environment impact considered

Zhang Ji, 2014 .

The Strength Analysis of Pre-tightening Force on Covering Pipe-ear

Zhang Ji, 2015 .

The Bionic Wing with Winglet in Near Space Aerodynamic Analysis

Zhang Ji, Hua Xin, Ming Lei, 2014 .

Load model of ball mill based on power spectrum analysis

Zhang Ji, 2013 .

Trajectory Planning of Autonomous Operation of Mountain Excavator And ADAMS Simulation Verification

Zhang Ji, 2013 .

Widening technology quality control at Kaiying road renovation section

Zhang Ji, 2012 .

The Research and the Practice of the Method Improvement into Postposition Dispose for NC Machining Method Based on CAM

Zhang Ji, 2007 .

Change on PCU power supply system of infi-90 DCS

Zhang Ji, 2002 .

The Difference of Art between Guangzhou and Beijing

Zhang Ji, 2008 .

Lange scale goal programming model for development of Daqing oilfield

Zhang Ji, 1999 .

Design of Innovation about the Table-Board in Experiment that It Can Meterage Integration In the Capability of Transmission with Mechanism Based on Modern Design Methods

Zhang Ji, 2007 .

Analysis and Forecast on the Evolvement track of Information Industry of the Cities along the Shanghai-Nanjing Line in Jiangsu Province

Zhang Ji, 2008 .

A multi-objective optimization model for sustainable logistics facility location

Xu Peng, Zhang Ji, Tang Xifeng, 2013 .

An Overview on Structure of Intelligent Multi-station Deep-drawing Press

Zhang Ji, 2014 .

On the causes of cracks in pre-stressed concrete beam bridge and their countermeasures

Zhang Ji, 2007 .

The method research on forecast of the traffic volume

Zhang Ji, 2011 .

To optimize the raw material structure so as to raise the level of waste paper utilization——An introduction to the general situation of and advices on the waste paper utilization in Zhejiang Province

Zhang Ji, 2002 .

Researches on Some Technical Problems in Designing Proportioning of Bituminous Mixture

Zhang Ji, 2004 .

Research and Development Applications of Product Series for Automobile Frame Plate in BX Steel

Zhang Ji, Benxi Iron, 2007 .

Line Selection of HHT Detection for Small Current Grounding Fault Based on Compressed Sensing

Zhang Ji, 2013 .

Numerical Simulation on Cavitation Flow Field Based on SST Turbulence Model

Zhang Ji, 2010 .

Strengthen Quality Education of Students and Teachers & Improve the Quality of Diploma Project

Zhang Ji, 2002 .

Intelligent Approach of Making Passenger Train Stock Turn-round Diagrams for Alternating Periods between Old and New Train Working Diagrams

Zhang Ji, 2012 .

Experimental Research on the Hydraulic Characteristic of Energy Absorber with Spiral Orifice Pipe

Zhang Ji, 2006 .

Application of Industrial Manipulator in Automatic Production Line Based on PLC

Zhang Ji, 2014 .

Problems in the dross field and countermeasures when Baogang's iron output reaches seven million tons annually

Zhang Ji, 2005 .

An Approach to Radar Netting Optimization by MATLAB Language

Zhang Ji, 2001 .

Stable Combustion and Oil Saving Experience with Louver Type Horizontal Dense-Sparse Pulverized Coal Burners in 670 t/h Anthracite Boilers

Zhang Ji, 2001 .

Series Compensation Scheme Evaluation of Outbound Power Transmission in East Inner Mongolian Power System Based on Risk Assessment

Zhang Ji, 2015 .

Development of biodiesel fuel in Japan

Zhang Ji, 2009 .

The Mining Practice and Developing Direction of the Thin-seam of Datong Coal-mining Area

Zhang Ji, 2007 .

Some Issues in Focus on the Study of the Modern Education Technology

Zhang Ji, 2001 .

Quality Problems and Solutions of Electrical Installation in Transformer Substation

Zhang Ji, 2013 .

Introduction of the Pressure Regulating System of the Header (PROven System) in 7.63m Coke Oven

Zhang Ji, 2007 .

Probe into Common Faults in Coal Feeder of Thermal Power Plant

Zhang Ji, 2013 .

The Scene Design of Display Design

Zhang Ji, 2009 .

Study on the Humanistic Solicitude Service Mode of University Library

Zhang Ji, 2005 .

The Design and Realization of Production and Management System Based on NFC Technology

Zhang Ji, 2014 .

Analysis on response of overhead oil and gas pipeline impacted by rock-fall

Zhang Ji, 2015 .

The mechanical creative design for motion scheme based on the function analysis

Zhang Ji, 2004 .

Analysis of the Bionic Wing's Aerodynamic Performance

Zhang Ji, Jing Shan Jiao, Xin Hua, 2014 .

Application of Multi-sensor Fusion in Data Processing

Zhang Ji, 2013 .

On ways of how to improve the engineering costs management in architectural construction enterprises

Zhang Ji, 2011 .

Study for the Flow Force Compensation of Spool Valve Based on FLUENT

Zhang Ji, 2014 .

Study on Design of Access Tunnel,Xilongchi Pumped Storage Power Plant

Zhang Ji, 2013 .

What is Promoting the Product's"Evolution"?Finding the Mysterious Force Inside the Product’s Appearance

Zhang Ji, 2009 .

Provisional protection measures for Jinshuihe Bridge construction in Longhai Railway

Zhang Ji, 2004 .

Analysis of Vibration Fatigue Life of Typical Aircraft Components

Zhang Ji, 2002 .

Active safety and Passive safety in Baojun Automobile Application

Zhang Ji, 2013 .

Software Development of the Grain Dryers Intelligent Prediction Control

Zhang Ji, 2003 .

Anti-corrosion coating technology in the steel box girder railway bridge in applied research

Zhang Ji, 2014 .

Infrared Nondestructive Testing Technology in Materlals and Progress

Zhang Ji, 2001 .

Comparison of the Plan of Design for the Drive of the Sorption Rotor

Zhang Ji, 2004 .

Emissions of Natural Gas Dual Fuel Diesel Engine at Different Beginnings of Injection of Diesel Pilot

Zhang Ji, 2000 .

Analysis on the Causes of Construction Accidents in China and Countermeasures

Zhang Ji, 2012 .

Reform and Applications of Integrated Automation for Electrical System in Thermal Power Plant of Baotou Steel

Zhang Ji, 2014 .

Quantitative studies on the selection of dust collector in coal-fired power plants

Zhang Ji, 2013 .

A health prognostic algorithm for Li-ion battery based on particle filter

Zhang Ji, 2015 .

On stressed mechanism of small diameter round underground continuous wall and design method

Zhang Ji, 2010 .

On importance of witness sampling in construction projects

Zhang Ji, 2012 .

On exploration of architectural engineering management

Zhang Ji, 2009 .

Investigation of design and construction technology of offshore anemometer tower in the vicinity of Nanri Island

Zhu Liang, Zhang Ji, Wang Miao, 2013 .

Optimization design of deep cavity cylindrical roller based on FEM and RSM

Zhang Ji, 2015 .

PID Control Experiment Based on Small Optical Tracking System

Zhang Ji, 2013 .

The Monitoring on 500 kV Line Protection PCM Equipment

Zhang Ji, 2010 .

Research on On-site Impulse Test Device of the Portable and Compact 2 MV Very Fast Transient Overvoltage Generator

Zhang Ji, 2015 .

Talking about the Prospects and Development Strategies of Oil Peony Planting in Forestry Ecological Construction in Tianjin

Zhang Ji, 2014 .

Application of internet of things technology in the textile SCM

Zhang Ji, 2010 .

Energy Conservation Optimization of Air Distribution for a Public Exhibition Room in Shanghai

Zhang Ji, 2010 .

Application of Function Tracing Screening in the Fault Diagnosis of Hydraulic Systems

Zhang Ji, 2012 .

Research of training the ability of personnels across century in the engineering universities and colleges

Zhang Ji, 1999 .

Flexural performance of combined pre-stressed TSC pile

Zhang Ji, 2015 .

Establishing mathematical model solving steel baiting problem

Zhang Ji, 2009 .

Design of a PFC controller for DC-DC power management unit

Zhang Ji, 2013 .

Depressed Steam Temperature Problem of Boiler No.3 of Beilun Power Plant's Second Stage Construction and Remedies Taken

Zhang Ji, 2004 .

Domestic water supply design for the residential quarter of a high-rise building

Zhang Ji, 2002 .

Application of Controlled Blasting in Demolishing Railway Bridge

Zhang Ji, 2000 .

Natural gas generating set with electromagnetic clutch

Zhang Ji, 2001 .

Application of BP Networks in the Stability Analysis of Slopes

Zhang Ji, 2001 .

Global Stability of Delayed Hopfield Neural Network Models

Zhang Ji, 2001 .

Global Stability Analysis of Neural Networks

Zhang Ji, 2002 .

The Promotion and Application of Stability for a General Class of Stochastic Neural Networks with Mixed Time Delays

Zhang Ji, 2014 .