Shaoping Chen

发表

Enhancing the zT Value of Bi-Doped Mg2Si0.6Sn0.4 Materials through Reduction of Bipolar Thermal Conductivity.

Z. A. Munir, Wen-xian Wang, Qiang Zhang, 2017, ACS applied materials & interfaces.

Study on the mechanism of Si-glass-Si two step anodic bonding process

Lifang Hu, Fang Shi, Hao Wang, 2018 .

Synthesis and characterization of Mg2Si/Si nanocomposites prepared from MgH2 and silicon, and their thermoelectric properties

N. Browning, Z. Bian, A. Shakouri, 2012 .

Oxidation behavior of AlMgB 14 -TiB 2 composite at elevated temperature

Y. Lei, L. Zhuang, Q. Meng, 2015 .

Friction and Wear Behavior of AlMgB14–TiB2 Composite at Elevated Temperature

Y. Lei, L. Zhuang, Lifang Hu, 2014, Tribology Letters.

Effect of Zn content on the chemical conversion treatments of AZ91D magnesium alloy

Lifang Hu, Shaoping Chen, Lifang Hu, 2012 .

Die-casting effect on surface characteristics of thin-walled AZ91D magnesium components

Yang Miao, Lifang Hu, Shaoping Chen, 2012 .

Tribological property of (TiC-TiB2)pNi ceramics prepared by field-activated and pressure-assisted synthesis

P. Xue, Ruixue Chen, Q. Meng, 2011 .

The Interface Investigation and Tribological Mechanism of TiB2-TiC-Ni/TiAl/Ti Functionally Gradient Materials Prepared by FAPAS Process

P. Xue, Lifang Hu, Q. Meng, 2011 .

Synthesis of (TiC)pNi/TiAl/Ti Graded Material via Field-Activated and Pressure-Assisted Combustion Process

Q. Meng, N. Zhang, Shaoping Chen, 2010 .

Microstructure and mechanical properties of AlMgB14–TiB2 associated with metals prepared by the field-assisted diffusion bonding sintering process

Y. Lei, L. Zhuang, Lifang Hu, 2015 .

In situ synthesis and bonding of TiTiAlTiC/Ni functionally graded materials by field-activated pressure-assisted synthesis process

P. Xue, N. Zhang, Z. A. Munir, 2012 .

Microstructure and mechanical properties of multilayer-lined composite pipes prepared by SHS centrifugal-thermite process

Z. A. Munir, J. Zhao, Q. Meng, 2007 .

Synthesis and characterization of TiB2–Ni–Ni3Al–CrNi alloy graded material by field-activated combustion

Z. A. Munir, J. Zhao, Q. Meng, 2009 .

Graded materials of (TiB2)pNi with nickel substrate prepared by field-activated pressure-assisted synthesis process

Z. A. Munir, N. Zhang, Q. Meng, 2010 .

Titanium diboride–nickel graded materials prepared by field-activated, pressure-assisted synthesis process

Z. A. Munir, Weipeng Liu, Q. Meng, 2009 .

Microstructure and Mechanical Properties of Graded Materials Prepared by Field-Activated and Pressure-Assisted Combustion Synthesis

Z. A. Munir, Cuirong Liu, Shaoping Chen, 2008 .

Synthesis of TiB2-TiC-Ni/TiAl/Ti functionally gradient materials by FAPAS process

P. Xue, Ruixue Chen, Q. Meng, 2011 .

Wear Behavior of (TiB2–TiC)–Ni/TiAl/Ti Gradient Materials Prepared by the FAPAS Process

Zhengyi Jiang, P. Xue, Lifang Hu, 2013, Tribology Letters.

The Process of Preparing AlMgB14 by Field-Activated and Pressure-Assisted Synthesis

Yang Miao, Shaoping Chen, W. Liu, 2012 .

Structural Characterization of AlMgB14 Prepared by Field-activated, Pressure-assisted Synthesis

Yang Miao, Shaoping Chen, W. Liu, 2013 .

One-step low temperature reactive consolidation of high purity nanocrystalline Mg 2 Si

S. Bux, Z. A. Munir, Tanghong Yi, 2015 .

Effect of Current on the Interfacial Structures of the Dissimilar Metals Diffusion Bonding

Lifang Hu, Shaoping Chen, Fuan Wang, 2011 .

Effect of AlSiFe on the anodizing process of 6063 aluminum

Daming Chen, Lifang Hu, Fang Shi, 2016 .

Thermoelectric properties of Cu2Ga4Te7 based compounds with Zn substitution for Cu and Ga

W. Ren, Jiangfeng Yang, J. Cui, 2014 .

Preparation and Thermoelectric Characteristics of SiO2/Mg2Si0.8Sn0.2 Bulk Nanocomposite

Shaoping Chen, Feng Zhang, Q. Meng, 2011 .