Xing‐yuan Huang

发表

Study on the Dissolution and Diffusion of Supercritical Carbon Dioxide in Polystyrene Melts Based on Adsorption and Diffusion Mechanism

Zhennan Cai, Duyang Wang, Xing‐yuan Huang, 2021, ACS omega.

Esterification modification and characterization of polyvinyl alcohol anion exchange membrane for direct methanol fuel cell

Jilin Wang, Lulu Wang, Xing‐yuan Huang, 2022, Journal of Polymer Research.

Effect of Pressure Difference between Inner and Outer Gas Layer on Micro-Tube Deformation during Gas-Assisted Extrusion

Xing‐yuan Huang, Bin Liu, Shaoyi Ren, 2022, Polymers.

Numerical studies of temperature effect on the extrusion fracture and swell of plastic micro-pipe

Z. Xiong, Z. Ren, Xing‐yuan Huang, 2018 .

Formation mechanism of high‐pressure water penetration induced fiber orientation in overflow water‐assisted injection molded short glass fiber‐reinforced polypropylene

Jia‐mei Lai, Hesheng Liu, T. Kuang, 2021 .

Experimental study on the dissolution of supercritical CO2 in PS under different agitators

Hai-Feng Liang, Xing‐yuan Huang, Long Wang, 2021 .

Numerical study on the influence of gas flow rates on the gas-assisted extrusion deformation of plastic micro-tubes

Xing‐yuan Huang, Z. Ren, Xing‐yuan Huang, 2019, Journal of Physics: Conference Series.

Three-dimensional viscoelastic simulation of the effect of wall slip on encapsulation in the coextrusion process

Mengshan Li, Hesheng Liu, Yibin Huang, 2013 .

A novel unified wall slip model for Poiseuille flow of polymer melt in the circular tube

Xing‐yuan Huang, Hesheng Liu, Z. Ren, 2016 .

The Formation Mechanism of the Double Gas Layer in Gas-Assisted Extrusion and Its Influence on Plastic Micro-Tube Formation

Duyang Wang, Xing‐yuan Huang, C. Luo, 2020, Polymers.

Experimental and numerical studies for the gas-assisted extrusion forming of polypropylene micro-tube

Z. Xiong, Z. Ren, Xing‐yuan Huang, 2019, International Journal of Material Forming.

Research on Inner Gas Inflation Improvements in Double-layer Gas-assisted Extrusion of Micro-tubes

Hesheng Liu, Xing‐yuan Huang, C. Luo, 2020, Polymers.

Experimental and numerical studies for the gas-assisted extrusion forming of polypropylene micro-tube

Z. Xiong, Xing‐yuan Huang, Z. Ren, 2019, International Journal of Material Forming.

Numerical Studies for the Effects of Viscoelastic Constitutive Parameters on the Extrudate Swell of Plastic Micro-Tubes

Z. Xiong, Z. Ren, Xing‐yuan Huang, 2018, Materials Science Forum.

Numerical and Experimental Studies on the Improvement of Gas Chamber Structure during Gas-Assisted Extrusion

Xing‐yuan Huang, Bin Liu, Shaoyi Ren, 2022, Polymers.

Wall slip velocity measurement of molten polypropylene in capillary flow based on length‐corrected Mooney technique

Hesheng Liu, Z. Ren, Xing‐yuan Huang, 2017 .

Numerical and experimental studies for gas assisted extrusion forming of molten polypropylene

Hesheng Liu, X. Deng, Z. Ren, 2015 .

Improved die assembly for gas‐assisted sheet extrusion using different up and down gas layer thicknesses

Xing‐yuan Huang, Hesheng Liu, Shi‐Yu Jiang, 2021 .

Numerical study on the effect of gas layer width on the gas-assisted extrusion forming of plastic pipes

Z. Xiong, Z. Ren, Xing‐yuan Huang, 2018, IOP Conference Series: Materials Science and Engineering.

Effect of Viscous Flow Activation Energy on the Gas-Assisted Extrusion Forming of Plastic Micro-Tube

Z. Ren, Xing‐yuan Huang, 2019, IOP Conference Series: Materials Science and Engineering.

Effects of Gases Temperature on the Viscosity and Flow Velocity of Melt in the Gas-Assisted Extrusion Forming of Plastic Micro-Tube

Z. Ren, Xing‐yuan Huang, 2020 .

Numerical Simulation of Flow in Complex Geometries by Using Smoothed Particle Hydrodynamics

T. Dong, Yadong He, Xianrong Yan, 2020 .

Solubility prediction of supercritical carbon dioxide in 10 polymers using radial basis function artificial neural network based on chaotic self-adaptive particle swarm optimization and K-harmonic means

Yan Wu, Lijiao Wang, Bingxiang Liu, 2015 .

Solubility prediction of gases in polymers using fuzzy neural network based on particle swarm optimization algorithm and clustering method

Yan Wu, B. Liu, Mengshan Li, 2013 .

Starch foam material performance prediction based on a radial basis function artificial neural network trained by bare‐bones particle swarm optimization with an adaptive disturbance factor

Mengshan Li, Xing‐yuan Huang, Ruting Xia, 2016 .

Numerical Simulation of Fiber Orientation of Short Fiber Reinforced Polypropylene in Injection Molding

Jia‐mei Lai, Hesheng Liu, A. Xiong, 2011 .

Solubility and diffusion coefficient of supercritical CO2 in polystyrene dynamic melt

Duyang Wang, Xing‐yuan Huang, Long Wang, 2020 .

Nanocellulose-Based Hybrid Hydrogels as Flexible Cathodes of Aqueous Zn-Ion Batteries

Jia‐mei Lai, Hesheng Liu, Xing‐yuan Huang, 2019, Nano.

Experimental and Simulation Research on Heat Pipe Thermal Management System Coupled with Battery Thermo-Electric Model

Ying Zhang, Zhaoqing Ke, Yingtao Xu, 2023, Processes.

3D Numerical Simulation Research on the Effect of Gate Location on Fiber Orientation and Injection-Molded Parts Deformation

Jia‐mei Lai, Hesheng Liu, A. Xiong, 2012 .

Solubility Prediction of Gases in Polymers based on Chaotic Self-adaptive Particle Swarm Optimization Artificial Neural Networks

Yan Wu, B. Liu, Mengshan Li, 2013 .

Investigation on the Non-Newtonian Fluid Flow in a Single Screw Extruder Using Incompressible SPH (ISPH)

Tian Wen Dong, Shun Liang Jiang, Xing Yuan Huang, 2012 .

Numerical Simulation on Forced Revolving Moving Boundary Problem Using Incompressible SPH (ISPH)

Xing‐yuan Huang, Hesheng Liu, T. Dong, 2011 .

Prediction of gas solubility in polymers by back propagation artificial neural network based on self-adaptive particle swarm optimization algorithm and chaos theory

Yan Wu, B. Liu, Mengshan Li, 2013 .

3D Numerical Simulation of the Hollow Square-Typed Polymer Based on Gas-Assisted Extrusion Method

Z. Ren, Xing‐yuan Huang, 2016 .

Effect of die’s annual width on the extrudate swell of plastic tube

Z. Ren, Xing‐yuan Huang, 2017 .

Effect of the Compression Ratio of Die on the Extrusion Forming of the Plastic Pipes

Z. Ren, Xing‐yuan Huang, 2018, 2018 5th International Conference on Information Science and Control Engineering (ICISCE).

Study on the Effect of the Rheological Properties of Melt on the Die Cross-Section Shape for the Plastic Tube Extrusion Forming

Xing‐yuan Huang, Z. Ren, Xing‐yuan Huang, 2016 .

Experimental and Simulation Study on the Dissolved Amount and Dissolution Rate of Supercritical CO2 in Polystyrene Melt

Zhennan Cai, Mengshan Li, Duyang Wang, 2019, ACS omega.

Influence of Gas Inlet Slit Width on Gas-Assisted Plastic Micro-Tube Extrusion

Xing‐yuan Huang, Bin Liu, Xiaohui Zhang, 2023, Processes.