A. Shyam

发表

Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation

Dongwon Shin, T. Watkins, J. Idrobo, 2019, Materials Science and Engineering: A.

Influence of Microstructural Heterogeneities on Small-Scale Mechanical Properties of an Additively Manufactured Al-Ce-Ni-Mn Alloy

A. Plotkowski, A. Devaraj, Richard A. Michi, 2022, SSRN Electronic Journal.

Using θ′ Interfaces as Templates for Planar L12 Precipitation in AlCuMnZr Alloys

A. Plotkowski, S. Bahl, J. Poplawsky, 2022, Additive Manufacturing Letters.

Dislocation-θ′ (Al2Cu) interactions during creep deformation of an Al-Cu alloy

A. Clarke, D. Ma, L. Allard, 2022, Scripta Materialia.

Rapid assessment of interfacial stabilization mechanisms of metastable precipitates to accelerate high-temperature Al-alloy development

M. Olszta, A. Devaraj, J. Poplawsky, 2022, Materials Research Letters.

Repurposing the Θ (Al2cu) Phase to Simultaneously Increase the Strength and Ductility of an Additively Manufactured Al-Cu Alloy

James F. Allen, A. Plotkowski, S. Bahl, 2022, SSRN Electronic Journal.

Microstructure and creep properties of cast near-eutectic Al–Ce–Ni alloys

A. Plotkowski, D. Dunand, A. Shyam, 2021, Materials Science and Engineering: A.

Onset of Θ' to Θ Phase Transformation in Al-Cu Alloys

James R. Morris, Dongwon Shin, B. Radhakrishnan, 2019, SSRN Electronic Journal.

Microstructural evolution and strengthening mechanisms in a heat-treated additively manufactured Al–Cu–Mn–Zr alloy

D. Leonard, A. Plotkowski, R. Dehoff, 2022, Materials Science and Engineering: A.

A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy

A. Plotkowski, R. Dehoff, S. Bahl, 2022, Acta Materialia.

Al-Cu-Ce(-Zr) alloys with an exceptional combination of additive processability and mechanical properties

A. Plotkowski, R. Dehoff, S. Bahl, 2021, Additive Manufacturing.

Towards high-temperature applications of aluminium alloys enabled by additive manufacturing

S. Babu, A. Plotkowski, R. Dehoff, 2021, International Materials Reviews.

Load shuffling during creep deformation of an additively manufactured AlCuMnZr alloy

A. Plotkowski, R. Dehoff, S. Bahl, 2022, Acta Materialia.

Microstructure, deformation and fracture mechanisms in Al-4043 alloy produced by laser hot-wire additive manufacturing

A. Plotkowski, G. Knapp, M. Gussev, 2022, Additive Manufacturing.

First-principles study of Al/Al3Ni interfaces

Dongwon Shin, M. Chisholm, Richard A. Michi, 2023, Computational Materials Science.

Additively manufactured Al-Ce-Ni-Mn alloy with improved elevated-temperature fatigue resistance

A. Plotkowski, R. Dehoff, S. Bahl, 2023, Additive Manufacturing.

Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy

D. Leonard, A. Plotkowski, R. Dehoff, 2021, Acta Materialia.

Cavitation-resistant intergranular precipitates enhance creep performance of θ'-strengthened Al-Cu based alloys.

D. Dunand, S. Bahl, A. Shyam, 2022, Acta Materialia.

Retardation of Small Creep–Fatigue Crack in Gr. 91 Steel Through the Combined Effects of Stress Relaxation, Microstructural Evolution, and Oxidation

L. Allard, S. Bahl, S. Suwas, 2018, Metallurgical and Materials Transactions A.

Heat-resistant aluminium alloys

S. Bahl, A. Shyam, 2022, Nature Materials.

Atomic structures of interfacial solute gateways to θ′ precipitates in Al-Cu alloys

G. Duscher, M. Oxley, J. Poplawsky, 2021, Acta Materialia.

Phase stability in Cast and Additively Manufactured Al-rich Al-Cu-Ce alloys

D. Leonard, A. Plotkowski, R. Dehoff, 2022, Journal of Alloys and Compounds.

Effect of grain-boundary θ-Al2Cu precipitates on tensile and compressive creep properties of cast Al–Cu–Mn–Zr alloys

C. Kenel, D. Dunand, S. Bahl, 2022, Materials Science and Engineering: A.

Effect of Mn on eutectic phase equilibria in Al-rich Al-Ce-Ni alloys

D. Leonard, A. Plotkowski, K. Sisco, 2023, Journal of Alloys and Compounds.

Primary solidification of ternary compounds in Al-rich Al–Ce–Mn alloys

A. Plotkowski, R. Dehoff, S. Bahl, 2020 .

3D printed eutectic aluminum alloy has facility for site-specific properties

D. Leonard, A. Plotkowski, R. Dehoff, 2023, Additive Manufacturing.

Microstructure and Mechanical Properties of Hypoeutectic Al-6ce-3ni-0.7fe (Wt.%) Alloy

A. Plotkowski, D. Dunand, A. Shyam, 2023, SSRN Electronic Journal.

Progression of creep deformation from grain boundaries to grain interior in Al-Cu-Mn-Zr alloys

D. Dunand, S. Bahl, D. Ma, 2023, Acta Materialia.

An additively manufactured near-eutectic Al-Ce-Ni-Mn-Zr alloy with high creep resistance

A. Plotkowski, D. Dunand, S. Bahl, 2024, Acta Materialia.

Co-, Ni- and Fe-rich grain-boundary phases enhance creep resistance in θ′-strengthened Al-Cu alloys

D. Dunand, A. Shyam, J. Rakhmonov, 2024, Materials Science and Engineering: A.

Creep deformation and cavitation in an additively manufactured Al-8.6Cu-0.4Mn-0.9Zr (wt%) alloy

A. Plotkowski, D. Dunand, S. Bahl, 2024, Additive Manufacturing.