Daw-Kwei Leu

发表

Modeling of Size Effect on Tensile Flow Stress of Sheet Metal in Microforming

Daw-Kwei Leu, Daw-Kwei Leu, 2009 .

Evaluation of friction coefficient using simplified deformation model of plastic hemispherical contact with a rigid flat

Daw-Kwei Leu, 2010 .

Erratum: “A Simplified Approach to Estimate Limiting Drawing Ratio and Maximum Drawing Load in Cup Drawing” [Journal of Engineering Materials and Technology, 2004, 126(1) pp. 116–122]

Daw-Kwei Leu, Jen-Yu Wu, 2004 .

Position deviation in V-die bending process with asymmetric bend length

Daw-Kwei Leu, Daw-Kwei Leu, 2013 .

Relationship between mechanical properties and geometric parameters to limitation condition of springback based on springback–radius concept in V-die bending process

Daw-Kwei Leu, Daw-Kwei Leu, 2018, The International Journal of Advanced Manufacturing Technology.

Springback prediction of the vee bending process for high-strength steel sheets

Daw-Kwei Leu, Zhi-Wei Zhuang, Daw-Kwei Leu, 2016 .

Positional deviation of bending point in asymmetric V-die bending process of HSS sheet: an experimental study

Daw-Kwei Leu, Daw-Kwei Leu, 2016 .

Position deviation and springback in V-die bending process with asymmetric dies

Daw-Kwei Leu, Daw-Kwei Leu, 2015 .

The curling characteristics of static inside-out inversion of metal tubes

Daw-Kwei Leu, Daw-Kwei Leu, 2000 .

Free surface roughening under simple tension

Daw-Kwei Leu, Daw-Kwei Leu, 2018 .

Prediction of the limiting drawing ratio and the maximum drawing load in cup-drawing

Daw-Kwei Leu, Daw-Kwei Leu, 1997 .

Position deviation of bending point in asymmetric V-die bending process with HSS trapezoid sheet

Daw-Kwei Leu, Daw-Kwei Leu, 2017 .

Finite element simulation of the squaring circular tube

Daw-Kwei Leu, Jen-Yu Wu, Daw-Kwei Leu, 2005 .

Modeling of surface roughness effect on dry contact friction in metal forming

Daw-Kwei Leu, Daw-Kwei Leu, 2011 .

A simple dry friction model for metal forming process

Daw-Kwei Leu, Daw-Kwei Leu, 2009 .

The limiting drawing ratio for plastic instability of the cup-drawing process

Daw-Kwei Leu, 1999 .

The shaping of a circular tube into a symmetric square-tube by finite-element modeling

Daw-Kwei Leu, Daw-Kwei Leu, 2006 .

The influence of coining force on spring-back reduction in V-die bending process

Daw-Kwei Leu, Chung-Ming Hsieh, 2008 .

Finite-element simulation of the lateral compression of aluminium tube between rigid plates

Daw-Kwei Leu, 1999 .

Finite-element simulation of the bending process of steel/polymer/steel laminate sheets

You-Min Huang, Daw-Kwei Leu, You-Min Huang, 1995 .

Finite-element simulation of hole-flanging process of circular sheets of anisotropic materials

Daw-Kwei Leu, Daw-Kwei Leu, 1996 .

An elasto-plastic finite element analysis of sheet metal U-bending process

You-Min Huang, Daw-Kwei Leu, 1995 .

Influence of punch shapes on the collar-drawing process of sheet steel

You-Min Huang, Tsung-Chia Chen, Daw-Kwei Leu, 1999 .

A simplified approach for evaluating bendability and springback in plastic bending of anisotropic sheet metals

Daw-Kwei Leu, Daw-Kwei Leu, 1997 .

An elasto-plastic finite-element simulation of successive UO-bending processes of sheet metal

You-Min Huang, Daw-Kwei Leu, You-Min Huang, 1995 .

Effects of process variables on V-die bending process of steel sheet

You-Min Huang, Daw-Kwei Leu, You-Min Huang, 1998 .

Finite element analysis of contact problems for a sheet metal bending process

You-Min Huang, Daw-Kwei Leu, You-Min Huang, 1995 .