J. Zuniga

发表

The potential role of bioengineering and three-dimensional printing in curing global corneal blindness

Trevor J Huff, P. Ludwig, J. Zuniga, 2018, Journal of tissue engineering.

Coactivation index of children with congenital upper limb reduction deficiencies before and after using a wrist-driven 3D printed partial hand prosthesis

Keaton J Young, James E. Pierce, B. Knarr, 2018, Journal of NeuroEngineering and Rehabilitation.

Future directions in biomechanics: 3D printing

Nicholas Stergiou, Jorge M. Zuniga, N. Stergiou, 2020 .

Functional changes through the usage of 3D-printed transitional prostheses in children

James E. Pierce, N. Stergiou, J. Zuniga, 2019, Disability and rehabilitation. Assistive technology.

Home intervention for children and adolescents with unilateral trans-radial and partial carpal reduction deficiencies

Jordan A. Borrell, J. Zuniga, Jessica L. Lukaszek, 2022, Scientific Reports.

Comparison of brain activation and functional outcomes between physical and virtual reality box and block test: a case study.

B. Knarr, J. Zuniga, Sheridan M. Parker, 2022, Disability and rehabilitation. Assistive technology.

Use of a three-dimensional printed anatomical model for tumor management in a pediatric patient

Trevor J Huff, J. Cramer, J. Zuniga, 2020, SAGE open medical case reports.

Home Intervention for Children with Unilateral Upper Limb Reduction Deficiencies

Jordan A. Borrell, C. Cortes, J. Zuniga, 2021 .

The use of copper to help prevent transmission of SARS-coronavirus and influenza viruses. A general review

J. Zuniga, A. Cortes, 2020, Diagnostic Microbiology and Infectious Disease.

The role of additive manufacturing and antimicrobial polymers in the COVID-19 pandemic

J. Zuniga, A. Cortes, 2020, Expert review of medical devices.

Brain lateralization in children with upper-limb reduction deficiency

James E. Pierce, T. Huppert, K. Arun, 2021, Journal of neuroengineering and rehabilitation.

Using 3D Printing to Improve Student Education of Complex Anatomy: a Systematic Review and Meta-analysis

A. Rosen, Michael Thompson, J. Zuniga, 2022, Medical Science Educator.

[3D-printed hand prostheses function in adolescents with congenital hand amputation: A case series].

J. Zuniga, J. Dote, P. Nahuelhual, 2020, Revista chilena de pediatria.

Experiences of the use of 3D printed hand ortoprosthesis (Cyborg Beast) in adolescents with congenital hand amputation and their main caregivers: A study of cases.

J. Zuniga, J. Dote, P. Nahuelhual, 2019, Revista chilena de pediatria.

The potential for machine learning algorithms to improve and reduce the cost of 3-dimensional printing for surgical planning

Trevor J Huff, Parker E Ludwig, Jorge M Zuniga, 2018, Expert review of medical devices.

3D Printed Antibacterial Prostheses

Jorge M Zuniga, J. Zuniga, 2018, Applied Sciences.

Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences

Cristina Fernandez, Jean M Peck, Dimitrios Katsavelis, 2015, BMC Research Notes.

Sustainable manufacture of scalable product families based on modularity

Ivan E. Esparragoza, Heriberto Maury, Jaime A. Mesa, 2021 .

The development of a low-cost three-dimensional printed shoulder, arm, and hand prostheses for children

Jean M Peck, Jorge M Zuniga, T. Kalina, 2017, Prosthetics and orthotics international.

Changes in Sensorimotor Cortical Activation in Children Using Prostheses and Prosthetic Simulators

M. Mukherjee, K. Fraser, Yingying Wang, 2021, Brain sciences.

Comparison of 3D printed anatomical model qualities in acetabular fracture representation

Nathaniel H. Hunt, N. Markin, J. Zuniga, 2021, Annals of Translational Medicine.

Coactivation index of children with congenital upper limb reduction deficiencies before and after using a wrist-driven 3D printed partial hand prosthesis

James E. Pierce, B. Knarr, J. Zuniga, 2018, Journal of NeuroEngineering and Rehabilitation.

An Open Source 3D-Printed Transitional Hand Prosthesis for Children

Rakesh Srivastava, Jorge M. Zuniga, Jean M Peck, 2016 .

Assessment of body-powered 3D printed partial finger prostheses: a case study

Jorge M Zuniga, Keaton J Young, James E Pierce, 2019, 3D Printing in Medicine.

Low Motor Dexterity and Significant Behaviors Following Hospitalized Isolation in Children

K. Fraser, J. Zuniga, C. Copeland, 2023, Children.

Applications of antimicrobial 3D printing materials in space

Michael Thompson, Jorge M. Zuniga, J. Zuniga, 2019, Journal of 3D Printing in Medicine.

Functional performance and patient satisfaction comparison between a 3D printed and a standard transradial prosthesis: a case report

J. Zuniga, Jean L. Peck, Rakesh Srivastava, 2022, Biomedical engineering online.

Remote fitting procedures for upper limb 3d printed prostheses

Jorge M Zuniga, Keaton J Young, Jean L Peck, 2019, Expert review of medical devices.

The potential for machine learning algorithms to improve and reduce the cost of 3-dimensional printing for surgical planning

Trevor J Huff, P. Ludwig, J. Zuniga, 2018, Expert review of medical devices.